PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Hydrogen Assisted Cracking in a Microalloyed Steel Subjected to a Rapid Thermal Cycle at High Temperature

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In a martensitic-bainitic microalloyed steel, the effect of hydrogen on fatigue crack growth was studied using rotary bending fatigue tests. The steel was subjected to a rapid thermal cycle to get a microstructure similar to that which would be formed within the coarse-grained heat-affected zone of a weld. Crack growth was monitored as a function of the number of cycles applied during fatigue tests on three types of specimens: 1) those without hydrogen charge, 2) those charged with hydrogen and 3) those charged with hydrogen which was then discharged through low-temperature heat treatment. All types showed persistent slip marks, and cracks propagated along high-shear-stress planes. In the presence of hydrogen, crack growth was affected by microstructural defects caused by the hydrogen charging process, and the persistent slip marks developed in an area closer to the crack tip and crack path. On the contrary, without hydrogen, crack growth occurred perpendicular to the applied force, and the persistent slip marks were fewer in number and further from the crack tip and crack path. This indicates that the plasticity increased (i.e., the damage that occurred in the presence of hydrogen matched the hydrogen-enhanced local plasticity mechanism).
Twórcy
  • Universidad Nacional Autónoma De México, Facultad De Química, Ciudad De México, México
  • Universidad Del Istmo, Santo Domingo Tehuantepec, México
  • Consejo Nacional De Ciencia Y Tecnología, Ciudad De México, México
  • Instituto Tecnológico De Morelia, Morelia, México
  • Instituto Tecnológico De Morelia, Morelia, México
autor
  • Universidad Nacional Autónoma De México, Facultad De Química, Ciudad De México, México
  • Universidad Nacional Autónoma De México, Instituto De Ciencias Físicas, Cuernavaca, México
Bibliografia
  • [1] M.-F. Maday, L. Pilloni, J. Nucl. Mater. 367-370, 516 (2007).
  • [2] S. H. Wang, W. C. Luu, K. F. Ho, J.K. Wu, Mater. Chem. Phys. 77, 447 (2003).
  • [3] M. A. Smirnov, I. Yu Pyshmintsev, A. N. Maltseva, O. V. Mushina, Metallurgist 56, 43 (2012).
  • [4] S. Kuo, Welding Metallurgy, New Jersey 2002.
  • [5] J. B. Ju, W. S. Kim, J. I. Jang, Mater. Sci. Eng. A. 546, 258 (2012).
  • [6] T. Vuherer, P. O. Maruscak, I. Samardzic, Metalurgija 51, 301 (2012).
  • [7] C. Li, Y. Wang, T. Han, B. Han, L. Li, J. Mater. Sci. 46, 727 (2011).
  • [8] A. Alvaro, V. Olden, A. Macadre, O. M. Akselsen, Mater. Sci. Eng. A 597, 29 (2014).
  • [9] H. Dong, X. Hao, D. Deng, Metallogr. Microstruct. Anal. 3, 138 (2014).
  • [10] A. Mihi, R. Benbouta, A. Abbassi, R. Cottis, Mater. Corros. 57, 766 (2006).
  • [11] A. Moitra, P. Parameswaran, P. R. Sreenivasan, S. L. Mannan, Mater. Charact. 48, 55 (2002).
  • [12] Y. Shi, Z. Han, J. Mater. Process. Tech. 207, 30 (2008).
  • [13] I. Kubena, B. Fournier, T. Kruml, J. Nucl. Mater. 424, 101 (2012).
  • [14] H. W. Höppel, M. Prell, L. May, M. Göken, Procedia Engineering 2, 1025 (2010).
  • [15] Y. Murakami, S. Matsuoka, Eng. Fract. Mech. 77, 1926 (2010).
  • [16] S. Fujita, S. Matsuoka, Y. Murakami, G. Marquis, Int. J. Fatigue 32, 943 (2010).
  • [17] A. Nagao, C. D. Smith, M. Dadfarnia, P. Sofronis, I.M. Robertson, Acta Mater. 60, 5182 (2012).
  • [18] V. Olden, C. Thaulow, R. Johnsen, E. Østby, Scripta Mater. 57, 615 (2007).
  • [19] I. M. Robertson, Eng. Fract. Mech. 68, 671 (2001).
  • [20] K. Homma, C. Miki, H. Yang, Eng. Fract. Mech. 59, 17 (1998).
  • [21] M. J. Balart, J. F. Knott, J. Nucl. Mater. 361, 112 (2007).
  • [22] K. K. Ray, N. Narasaiah, R. Sivakumar, Mater. Sci. Eng. A 372, 81 (2004).
  • [23] E. López Martínez, O. Vázquez Gómez, B. F. Campillo Illanes, Ingeniería mecánica, tecnología y desarrollo 5, 273 (2014).
  • [24] E. Girault, P. Jacques, P. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, F. Delannay, Mater. Character. 40, 111 (1998).
  • [25] N. Saintier, T. Awane, J. M. Olive, S. Matsuoka, Y. Murakami, Int. J. Hydrogen Energy 36, 8630 (2011).
  • [26] E. López-Martínez, H. J. Vergara-Hernández, O. Flores, B. Campillo, ISIJ Int. 55, 2435 (2015).
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d5444bc5-7b76-4440-b0a1-9964b001c4d9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.