Improving the properties of HDF boards for use in humid conditions

• Autorzy: Nicewicz D. , Monder S.
• Języki publikacji: EN

Abstrakty

EN

Industrially produced HDFs were subjected to heating or the boards have been covered with a layer of vegetable oil, and then the boards were heated at 150º C for 1.5-2.5 h These operations aimed at increasing the tensile properties and reduce swelling to the extent that these boards may be used in wet conditions outdoors. Properties of produced boards were examined, which concluded that boards thermal treatment leads to a significant improvement of their properties (MOR and MOE increase and decrease of TS) and oil saturation of boards can be useful to reduce the swelling of boards.

Słowa kluczowe

EN

oil saturation; thermal treatment; properties of HDF

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 88
• Strony: 170--173
• Opis fizyczny: Bibliogr. 8 poz.

Twórcy

autor

Nicewicz D.

• Faculty of Wood Technology, Warsaw University of Life Sciences – SGGW

autor

Monder S.

• Faculty of Wood Technology, Warsaw University of Life Sciences, Poland

Bibliografia

• 1. Ale´n R, Kotilainen R, Zaman A .2002: Thermochemical behavior of Norway spruce (Picea abies) at 180–225o C. Wood Science Technology 36:163–171.
• 2. Bekhta P, Niemz P. 2003: Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57:539–546.
• 3. Mohebby B., Ilbeighi F. 2007: Physical and mechanical properties of hydrothermally modified medium density fiberboard (MDF). Proceedings of the International Panel Products Symposium 2007. Cardiff, Wales, UK 17–19 October 2007, 341–348.
• 4. Mohebby B., Ilbeighi F., Kazemi- Najafi S. 2008: Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fibreboard (MDF). Holz als Roh- und Werkstoff. 66(3), 213-218.
• 5. Rowell R.M. (editor) 2005: Handbook of wood chemistry and wood composites. Chapter 14. Taylor &Francis Group. Boca Raton, London, New York, Singapore.
• 6. Sekino N, Inoue M, Irle M. 1998: The bond quality of steam pre-treated particles. In: The 2nd European Panel Products Symposium: 30–38.
• 7. Stamm A.J. 1964: Wood and Cellulose Science. The Ronald Press Company, USA. Chapter 19: 312–342.
• 8. http://www.meyertimber.com/Products/Medite-Tricoya-Extreme-Durable-MDF.aspx.