Process of Manufacturing Transparent Models of Anatomical Structures

• Autorzy: Wojnarowska Wiktoria , Nieroda Maciej , Gładysz Ewelina , Miechowicz Sławomir , Kudasik Tomasz

Identyfikatory

DOI

10.2478/amst-2019-0012

• Języki publikacji: EN

Abstrakty

EN

In recent years, a rapid increase in the use of three-dimensional (3D) printing technologies in medicine, especially in the manufacturing of the diagnostic models, can be observed. In some cases, there is a need to fabricate transparent models that allow visualization of internal structures of the object. Unfortunately, techniques used to manufacture such models are often very expensive and time-consuming. The above-mentioned issues were the motivation for developing a new method of fabrication transparent models for visualization of internal structures for planning surgical treatments. This paper presents the process of making transparent models using the newly developed method – the stacked layers method. In order to compare this new method and one of the most common 3D printing technologies – fused deposition modeling (FDM) – the models for two medical cases using both of these methods were fabricated. As a result of this work, it can be concluded that the stacked layers method provides faster and cheaper way of making transparent medical models. The main features of fabrication process that have a huge impact on quality of the models made by new method were pointed. The results of this study suggest that models fabricated with the use of this method can be useful as a diagnostic tool in medical applications for planning surgical treatments.

Słowa kluczowe

EN

3D printing; medical applications; additive manufacturing

PL

druk 3D; zastosowanie medyczne; przyrostowa metoda wytwarzania

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2020
• Tom: Vol. 44, nr 2
• Strony: 62--66
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Wojnarowska Wiktoria

• Doctoral School of Engineering and Technical Sciences, at the Rzeszów University of Technology, Al. Powstanców Warszawy 8, 35-959 Rzeszów, Poland

autor

Nieroda Maciej

• Department of Mechanical Engineering, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstanców Warszawy 8, 35-959 Rzeszów, Poland

autor

Gładysz Ewelina

• Department of Mechanical Engineering, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstanców Warszawy 8, 35-959 Rzeszów, Poland

autor

Miechowicz Sławomir

• Department of Mechanical Engineering, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstanców Warszawy 8, 35-959 Rzeszów, Poland

autor

Kudasik Tomasz

• Department of Mechanical Engineering, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstanców Warszawy 8, 35-959 Rzeszów, Poland

Bibliografia

• [1] F. RENGIER, et al.: 3D printing based on imaging data: review of medical applications. Int J CARS, 5(2010)4, 335-341.
• [2] S. HILLERUP, R. JENSEN: Nerve injury caused by mandibular block analgesia. Int. J. Oral Maxillofac. Surg., 35(2006)5, 437-443.
• [3] L. BENNETTO, N.K. PATEL, G. FULLER: Trigeminal neuralgia and its management. BMJ, 334(2007), 201-205.
• [4] G. BUDZIK, et al.: Rekonstrukcja geometrii żuchwy i korony zęba przy użyciu optycznych systemów pomiarowych, Problemy Nauk Stosowanych, 2(2014), 121-130.
• [5] H. CZYŻ, G. BUDZIK, R. BIENKIEWICZ: Wybrane aspekty szybkiego prototypowania modeli do zastosowań inżynierii medycznej, Mechanik, 12(2015), 40-45.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).