The role of die definition in the numerical simulations of two-points incremental forming processes

• Autorzy: Perzynski Konrad , Pawlikowski Kacper , Madej Łukasz

Identyfikatory

DOI

10.7494/cmms.2023.1.0795

• Języki publikacji: EN

Abstrakty

EN

The main objective of this work is to investigate the influence of the definition of dies type in the finite element simulation of the two-points incremental forming processes (TPIF). Particular attention is on determining the effect of assigning elastic properties for the 3D printed dies or considering fully rigid on the final results. During the research, three different shapes of dies were analyzed. Simulation results in the form of sheet thickness distributions and measured forces are presented for comparison purposes.

Słowa kluczowe

EN

two-points incremental forming; finite element method; additive manufacturing

• Wydawca: Wydawnictwa AGH
• Czasopismo: Computer Methods in Materials Science
• Rocznik: 2023
• Tom: Vol. 23, No. 1
• Strony: 5--12
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Perzynski Konrad

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059, Krakow, Poland

• https://orcid.org/0000-0001-7761-2599

autor

Pawlikowski Kacper

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059, Krakow, Poland

• https://orcid.org/0000-0002-3990-1661

autor

Madej Łukasz

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059, Krakow, Poland

• https://orcid.org/0000-0003-1032-6963

Bibliografia

• Bârsan, A., Racz, S.-G., Breaz, R., & Crenganiș, M. (2022). Dynamic analysis of a robot-based incremental sheet forming using Matlab-Simulink SimscapeTM environment. Materials Today: Proceedings, 62(5), 2538–2542. https://www.doi.org/10.1016/j.matpr.2022.03.134.
• Gronostajski, Z., Pater, Z., Madej, L., Gontarz, A., Lisiecki, L., Łukaszek-Sołek, A., Łuksza, J., Mróz, S., Muskalski, Z., Muzykiewicz, W., Pietrzyk, M., Śliwa, R.E., Tomczak, J., Wiewiórowska, S., Winiarski, G., Zasadziński, J., & Ziółkiewicz, S. (2019). Recent development trends in metal forming. Archives of Civil and Mechanical Engineering, 19(3), 898–941.https://www.doi.org/10.1016/j.acme.2019.04.005.
• Hu, Z., Jin, J., & Jinlan, B. (2017). Research on the forming direction optimization for the uniformity of the sheet part thickness in the CNC incremental forming. The International Journal of Advanced Manufacturing Technology, 93(5–8), 2547–2559. https://www.doi.org/10.1007/s00170-017-0616-3.
• Jeswiet, J., Geiger, M., Engel, U., Kleiner, M., Schikorra, M., Duflou, J., Neugebauer, R., Bariani, P., & Bruschi, S. (2008).Metal forming progress since 2000. CIRP Journal of Manufacturing Science and Technology, 1(1), 2–17. https://www.doi.org/10.1016/j.cirpj.2008.06.005.
• Kharche, A., & Barve, S. (2022). Incremental sheet forming of composite material. Materials Today: Proceedings, 63, 176–184. https://www.doi.org/10.1016/j.matpr.2022.02.447.
• Leem, D., Liao, S., Bhandari, S., Wang, Z., Ehmann, K., & Cao, J. (2022). A toolpath strategy for double-sided incremental forming of corrugated structures. Journal of Materials Processing Technology, 308, 117727. https://www.doi.org/10.1016/j.jmatprotec.2022.117727.
• McAnulty, T., Jeswiet, J., & Doolan, M. (2017). Formability in single point incremental forming: A comparative analysis of the state of the art. CIRP Journal of Manufacturing Science and Technology, 16, 43–54. https://www.doi.org/10.1016/j.cirpj.2016.07.003.
• Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021). 4D printing of shape memory polylactic acid (PLA). Polymer, 230, 124080. https://www.doi.org/10.1016/j.polymer.2021.124080.
• Mohanty, S., Regalla, S. P., & Rao, Y.V.D. (2021). Effect of inclination and rotation of the sheet on sheet thinning and formability in robot assisted incremental sheet metal forming. Materials Today: Proceedings, 46(2), 1039–1049. https://www.doi.org/10.1016/j.matpr.2021.01.228.
• Peng, W., Ou, H., & Becker, A. (2019). Double-sided incremental forming: a review. Journal of Manufacturing Science and Engineering, 141(5), 050802. https://www.doi.org/10.1115/1.4043173.
• Rosoux, F., Appeldoorn, H., Garray, D., & Beeckman, E. (n.d.). Large scale robotic 3D printing trajectories generation and pieces quality optimization. Computer Methods in Materials Science [in print].

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).