GPS application in the design of gearboxes

• Autorzy: Maláková Silvia , Sivák Samuel

Identyfikatory

DOI

10.2478/ama-2022-0037

• Języki publikacji: EN

Abstrakty

EN

The integrated geometrical product specification (GPS) system for workpiece geometry specification and verification is an improved engineering tool for product development and production. The goal of the GPS system is to provide tools for cost-effective management of variability in products and processes. This can be achieved by using a more precise way of expressing the functional requirements of the workpiece, complete and well-defined specifications and integrated verification approaches. The intended function of the product is ensured by controlling the geometry and material properties of the workpiece parts, which make up the product. GPS is a language just for checking geometry, and further development is based on computational mathematics and correct, consistent logic using general sets of rules that can be applied to all types of specifications. This article deals with the application of GPS rules in the design of gearboxes.

Słowa kluczowe

EN

gearbox; geometrical product specifications; tolerancing; drawing

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2022
• Tom: Vol. 16, no. 4
• Strony: 309--315
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Maláková Silvia

• Faculty of Mechanical Engineering, Department of Structural and Transportation Engineering, Technical University of Košice, Letná 1/9, 042 00 Košice, Slovak Republic

• https://orcid.org/0000-0003-1660-6333

autor

Sivák Samuel

• Faculty of Mechanical Engineering, Department of Structural and Transportation Engineering, Technical University of Košice, Letná 1/9, 042 00 Košice, Slovak Republic

• https://orcid.org/0000-0002-9820-4874

Bibliografia

• 1. Lin W, Chen N. Research on New Geometrical Product Specifica-tions (GPS)-Geometrical Tolerancing. 5th International Conference on Mechanical, Control and Computer Engineering (ICMCCE). 2020: 2106-2109. https://doi.org/10.1109/ICMCCE51767.2020.00458
• 2. Cai N, Answer N, Scott P. J, Qiao L, Jiang X. A new partitioning process for geometrical product specifications and verification. Preci-sion Engineering. 2020;62:282-295. https://doi.org/10.1016/j.precisioneng.2019.12.009
• 3. Moravec J. Extrusion in Hydroenvironment in laboratory Conditions, XXI. AEaNMiFMaE-2018,MATEC Web of Conference 168, 07003, 2018. https://doi.org/10.1051/mateccof/201816807003.
• 4. Humienny Z. State of art in standardization in the geometrical prod-uct specification area a decade later. CIRP Journal of Manufacturing Science and Technology. 2021;33:42–51. https://doi.org/10.1016/j.cirpj.2021.02.009
• 5. Figlus T, Koziol M, Kuczynski L. The Effect of Selected Operational Factors on the Vibroactivity of Upper Gearbox Housings Made of Composite Materials. Sensors. 2019; 19(19), 4240:1-17. https://doi.org/10.3390/s19194240
• 6. Sinčák PJ, Virgala I, Kelemen M, Prada E, Bobovský Z, Kot T. Chim-ney Sweeping Robot Based on a Pneumatic Actuator. Applied Sci-ences. 2021; 11(11):4872. https://doi.org/10.3390/app11114872
• 7. Qi Q, Pagani L, Jiang X, Scott P. J. Enabling metrology-oriented specification of geometrical variability – A categorical approach. Ad-vanced Engineering Informatics. 2019;39:347–358. https://doi.org/10.1016/j.aei.2018.11.001
• 8. Cheng Y, Wang Z, Chen X, Li Y, Li H, Wang H. Evaluation and Optimization of Task-oriented Measurement Uncertainty for Coordi-nate Measuring Machines Based on Geometrical Product Specifica-tions. Applied Sciences. 2019;9(1):1-6. https://doi.org/10.3390/app9010006.
• 9. Can E, Bozca M. Optimisation of gear geometrical parameters using KISSsoft. Machines, Technologies, Materials. 2019;13(1),7-10.
• 10. Sapietková A. Simplified computation methodology for contact forces on tapered rolling bearing with flexible parts. Scientific Journal of Si-lesian University of Technology. Series Transport. 2018;99:177–182. https://doi.org/10.20858/sjsutst.2018.99.16
• 11. Moravec J, Bury P, Černobila F. Investigation of Forging Metal Specimens of Different Relative Reductions Using Ultrasonic Waves. Materials. 2021;14(9), 2406. https://doi.org/10.3390/ma14092406
• 12. Humienny Z. Can ISO GPS and ASME Tolerancing Systems Define the Same Functional Requirements? Applied Sciences. 2021;11, 8269. https://doi.org/10.3390/app11178269
• 13. Wejrzanowski T, Ibrahim SH, Skibinski J, Cwieka K, Kurzydlowski KJ.: Appropriate models for simulating open porous materials. Image Analysis & Stereology. 2017;36:105-110. https://doi.org/10.556/ias.1649
• 14. Yu Y, Wang Q, Ni J, Xu D, Li J. A GPS-based force rendering model for virtual assembly of mechanical parts. The International Journal of Advanced Manufacturing Technology. 2022;118,465–477. https://doi.org/10.1007/s00170-021-07939-x

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).