PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Protective clothing for pesticide operators: part II – data analysis of fabric characteristics

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Development of objective measurements is an important requirement for establishing performance-based standards for protective clothing used while handling pesticide. This study, the second in a two-part series, reports on the work completed to evaluate the performance of approximately 100 fabrics that are either used or have the potential to be used for garments worn by operators while applying pesticides. Part I, published separately, provides an overview of these issues and describes research undertaken to select a test chemical for use in subsequent studies. The goals of this study were first to develop a comprehensive approach to evaluate the performance of garments currently being used by pesticide operators, and second, to use the laboratory and field data in the development of performance specifications.
Rocznik
Strony
7--11
Opis fizyczny
Bibliogr. 9 poz.
Twórcy
autor
  • University of Maryland Eastern Shore, USA
  • DuPont Engineering Research and Technology, USA
Bibliografia
  • 1. US Environmental Protection Agency (US EPA). Worker protection labeling. Label review manual. Washington, DC: EPA; 2013. Available from: http://www.epa.gov/oppfead1/labeling/lrm/(open in a new window).
  • 2. US Environmental Protection Agency (EPA). Guidance manual for selecting protective clothing for agricultural pesticides operations (EPA 736-B-94-001). Washington, DC: EPA; 1993.
  • 3. ASTM. Standard test methods for mass per unit area (weight) of fabric (D3776/D3776M-09a). West Conshohocken (PA): ASTM International; 2013.
  • 4. ASTM. Standard test method for fabric count of woven fabric (D3775). West Conshohocken (PA): ASTM International.
  • 5. ASTM. Standard test method for air permeability of textile fabrics (D737-04). West Conshohocken (PA): ASTM International; 2004.
  • 6. ASTM. Standard test method for breaking strength and elongation of textile fabrics (grab test) (D5034-09). West Conshohocken (PA): ASTM International; 2009.
  • 7. ASTM. Standard test methods for water vapor transmission of materials (E96/E96M-13). West Conshohocken (PA): ASTM International; 2013.
  • 8. International Organization for Standardization (ISO). Protective clothing – protection against liquid chemicals – measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials (Standard No. ISO 22608:2004). Geneva: ISO; 2004.
  • 9. Hochberg Y, Tamhane AC. Multiple comparison procedures. New York: Wiley; 1987.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d414ebbc-71a4-42dc-b652-1620a7fe074d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.