PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Manufacturing process and characterization of electrospun PVP/ZnO NPs nanofibers

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Constantly developing nanotechnology provides the possibility of manufacturing nanostructured composites with a polymer matrix doped with ceramic nanoparticles, including ZnO. A specific feature of polymers, i.e. ceramic composite materials, is an amelioration in physical properties for polymer matrix and reinforcement. The aim of the paper was to produce thin fibrous composite mats, reinforced with ZnO nanoparticles and a polyvinylpyrrolidone (PVP) matrix obtained by means of the electrospinning process and then examining the influence of the strength of the reinforcement on the morphology and optical properties of the composite nanofibers. The morphology and structure of the fibrous mats was examined by a scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS) and Fourier-transform infrared spectroscopy (FTIR). UV –Vis spectroscopy allowed to examine the impact of zinc oxide on the optical properties of PVP/ZnO nanofibers and to investigate the width of the energy gap.
Rocznik
Strony
193--200
Opis fizyczny
Bibliogr. 43 poz., rys., wykr.
Twórcy
autor
  • Silesian University of Technology, 2A Akademicka St., 44-100 Gliwice, Poland
autor
  • Silesian University of Technology, 2A Akademicka St., 44-100 Gliwice, Poland
  • Silesian University of Technology, 2A Akademicka St., 44-100 Gliwice, Poland
Bibliografia
  • [1] S. Keskin, I. Uslu, and T. Tunc, “Preparation and characterization of neodymia doped PVA/Zr-Ce oxide nanocrystalline composites via electrospinning technique”, Material and Manufacturing Processes, (26), 1346‒1351, 2011.
  • [2] S. Chaudhari, T. Shaikh, and P. Pandey, “A review on polymer TiO2 nanocomposites”, Journal of Engineering Research and Applications, (3), 1386‒1391, 2013.
  • [3] R. Sridhar, J.R. Venugopal, S. Sundarrajan, and S. Ramakrishna, “Electrospun nanofibers for pharmaceutical and medical applications”, Journal of Drug Delivery Science and Technology, (21), 451‒468, 2011.
  • [5] A. Camposeo, L. Persano, and D. Pisignano, “Electrospun light-emitting nanofibers as building blocks for photonics and electronics”, SPIE newsroom, 2013, DOI: 10.1117/2.1201308.005067.
  • [6] B. Ding, M. Wang, and J. Yu, “Gas sensors based on electrospun nanofibers”, Sensors, (9), 1609‒1624, 2009.
  • [7] M. Zheng, M. Gu, and Y. Jin, “Preparation, structure and properties of TiO2–PVP hybrid films”, Materials Science and Engineering: B, (77), 5‒59, 2000.
  • [8] X. Liu, Q. Chen, and L. Lv, “Preparation of transparent PVA/TiO2 nanocomposite films with enhanced visible-light photocatalytic activity”, Catalysis Communications, (58), 30‒33, 2015.
  • [9] M. Nowak, T. Tański, P. Szperlich, W. Matysiak, M. Kępińska, D. Stróż, Ł. Bober, and B. Toroń, “Using of sonochemically prepared SbSI for electrospun nanofibers”. Ultrasonics Sonochemistry, (38), 544‒552, 2017.
  • [10] W. Huang, L. Jiang, and J. Luo, “Effect of magnetic field on stability of jet motion in electrospinning”, Materials and Manufacturing Processes, (31), 1603‒1607, 2016.
  • [11] M. Afzali, A. Mostafavi, and T. Shamspur, “Electrospun composite nanofibers of poly vinyl pyrrolidone and zinc oxide nanoparticles modified carbon paste electrode for electrochemical detection of curcumin”, Materials Science and Engineering: C, (68), 789‒797, 2016.
  • [12] K. Thangavel, A. Balamurugan, and T. Venkatachalam, “Structural, morphological and optical properties of ZnO nano-fibers”, Superlattices and Microstructures, (90), 45‒52, 2016.
  • [13] J. Chang, M. Dommer, and C. Chang, “Piezoelectric nanofibers for energy scavenging applications”, Nano Energy, (1), 356‒371, 2016.
  • [14] Y. Peng, and L. Bao, “Controlled-synthesis of ZnO nanorings”, Frontiers of Chemistry in China, (3), 458‒463, 2008.
  • [15] Z.L. Wang, “Nanostructures of zinc oxide”, Materials Today, (7), 26‒33, 2004.
  • [16] P. Kumbhakar, S. Sinha Ray, and A.L. Stepanov, “Optical properties of nanoparticles and nanocomposites”, Journal of Nanomaterials, (2), 5‒15, 2014.
  • [17] M. Sato, A. Kawata, and S. Morito, “Preparation and properties of polymer/zinc oxide nanocomposites using functionalized zinc oxide quantum dots”, European Polymer Journal, (44), 3430–3438, 2008.
  • [18] T. Du and O.J. Ilegbusi, “Synthesis and morphological characterization on PVP/ZnO nano hybrid films”, Journal of materials science, (39)19, 6105‒6109, 2004.
  • [19] S. Selvam and S. Mahalingam, “Functionalization of cotton fabric with PVP/ZnO nanoparticles for improved reactive dyeability and antibacterial activity”, Carbohydrate polymers, (87)2, 1419‒1424, 2012.
  • [20] A.P. Indolia and M.S. Gaur, “Optical properties of solution grown PVDF-ZnO nanocomposite thin films”, J Polym Res, (20), 43, 2013.
  • [21] M.A.A. Rahman, S. Mahmud, and A.K. Alias, “Effect of nanorod zinc oxide on electrical and optical properties of starch-based polymer nanocomposites”, Journal of Physical Science, (24), 17‒28, 2013.
  • [22] E.F. de Melo, G.B.K. Alves, and A.S. Junior, “Synthesis of fluorescent PVA/polypyrrole-ZnO nanofibers”, Journal of Material Science, (48), 3652‒3658, 2013.
  • [23] D. Lee, K. Cho, and J. Choi, “Effect of mesoscale grains on thermoelectric characteristics of aligned PVP/ZnO composite nanofibers”, Materials Letters, (42), 250‒252, 2015.
  • [24] T. Du, H. Song, and O.J. Ilegbusi, “Sol–gel derived PVP/ZnO nanocomposite thin film for superoxide radical sensor”, Materials Science and Engineering: C, (27), 414‒420, 2007.
  • [25] Y. Liao, T. Fakuda, and N. Kamata, “Diameter control of ultrathin zinc oxide nanofibers synthesized by electrospinning”, Nanoscale Res. Lett, (9), 267, 2014.
  • [26] W. Matysiak, T. Tański, and M. Zaborowska, “Analysis of the Optical Properties of PVP/ZnO Composite Nanofibers”, (Book), Properties and characterization of modern materials. Eds.: Andreas Ochsner, Holm Altenbach. Singapore: Springer, 43‒49, 2017.
  • [27] T. Tański, W. Matysiak, and Ł. Krzemiński, “Analysis of optical properties of TiO2 nanoparticles and PAN/TiO2 composite nanofibers”, Materials and Manufacturing Processes, (32)11, 1218‒1224, 2016.
  • [28] P. Jarka, T. Tański, and W. Matysiak, “Manufacturing and investigation of surface morphology and optical properties of composite thin films reinforced by TiO2, Bi2O3 and SiO2 nanoparticles”, Applied Surface Science, (82), 5‒11, 2017.
  • [29] T. Tański, W. Matysiak, and B. Hajduk, “Manufacturing and investigation of physical properties of polyacrylonitrile nanofibre composites with SiO2, TiO2 and Bi2O3 nanoparticle”, Beilstein J. Nanotechnol., (7), 1141‒1155, 2016.
  • [30] H. Wu and W. Pan, “Preparation of zinc oxide nanofibers by electrospinning”, J. Am. Ceram. Soc., (89), 99‒701, 2006.
  • [31] Y. Liao, T. Fukuda, and N. Kamata, “Diameter control of ultrathin zinc oxide nanofibers synthesized by electrospinning”, Nanoscale Research Letters, (9), 267, 2014.
  • [32] B. Ding, M. Wang, and X. Wang, “Electrospun nanomaterials for ultrasensitive sensor”, Materials Today, (13), 16‒27, 2010.
  • [33] K.G. Kanade, B.B. Kale, and R.C. Aiyer, “Effect of solvents on the synthesis of nano-size zinc oxide and its properties”, Materials Research Bulletin, (41), 590‒600, 2006.
  • [34] G. Xiong, U. Pal, and J.G. Serrano, “Photoluminescence and FTIR study of ZnO nanoparticles: the impurity and defect perspective”, Phys. Stat. Sol. (c) 3, (10), 3577–3581, 2006.
  • [35] C.T. Laot, E. Marand, and H.T. Oyama, “Spectroscopic characterization of molecular interdiffusion at a poly(vinyl pyrrolidone)/vinyl ester interface”, Polymer Volume, (40), 1095–1108, 1999.
  • [36] A.M. Abdelghany, M. Mekhail, and E.M. Abdelrazek, “Combined DFT/FTIR structural studies of monodispersed PVP/Gold and silver nano particles”, Journal of Alloys and Compounds, (646), 326–332, 2015.
  • [37] E.M. Abdelrazek, I.S. Elashmawi, and A. El-khodary, “Structural, optical, thermal and electrical studies on PVA/PVP blends filled with lithium bromide”, Current Applied Physics, (10), 607–613, 2010.
  • [38] M. Gharagozlou and S. Naghibi, “Sensitization of ZnO nanoparticle by vitamin B12: Investigation of microstructure, FTIR and optical properties”, Materials Research Bulletin, (84), 71‒78, 2016.
  • [39] T. Gutul, E. Rusu, and N. Condur, “Preparation of poly(N-vinylpyrrolidone)-stabilized ZnO colloid nanoparticles”, Bellstein J. Nanotechnol., (5), 402‒406, 2014.
  • [40] A.M. Abdelghany, E.M. Abdelrazek, and S.I. Badr, “Effect of gamma-irradiation on (PEO/PVP)/Au nanocomposite: Materials for electrochemical and optical applications”, Materials & Design, (57), 532‒543, 2016.
  • [41] R.S. Sabry, F.S. Mohammed, and R.A.A. Alkareem, “Fabrication of electro spinning 1D ZnO Nano fibers as UV-Photoconductor”, Eng. & Tech.Journal, 2015;33.
  • [42] N. Lü, X. Lü, and X. Jin X, “Preparation and characterization of UV-curable ZnO/polymer nanocomposite films”, Polymer International, (56), 138‒143, 2007.
  • [43] T. Tański and W. Matysiak, “Optical properties of PVP/ZnO composite thin films”, Journal of Achievements in Materials and Manufacturing Engineering, (82/1), 5‒11, 2017.
  • [44] T. Tański, W. Matysiak, Ł. Krzemiński, et al., “Optical properties of thin fibrous PVP/SiO2 composite mats prepared via the sol-gel and electrospinning methods”, Applied Surface Science, (424), 184‒189, 2017.
Uwagi
EN
The research presented in this article was financed by the National Science Centre, Poland, based on decision number 2016/23/B/ST8/02045.
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d4128cf3-4e18-4315-90a6-c5183de65549
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.