Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The purpose of studying the properties of zinc-manganese nanoferrite was to compare organic fuels that were produced in conditions created by the auto gel combustion method, using citric acid, glycine, and urea with different pH values: (citric acid = 6, glycine = 3 and urea = 0). The samples were prepared in stoichiometric ratios to gain Mn0.5Zn0.5Fe2O4, and all the samples were calcined in the same condition (500 °C and 30 minutes). It should be noted that the entire process of synthesis was photographed to analyze the effect of fuels during the combustion process. Combustion reactions were studied by simultaneous thermal analysis (STA), FT-IR spectroscopy, and X-ray diffraction (XRD), also the Rietveld method was used to determine the type and amount of crystalline phases. Magnetic properties of the samples were measured by vibration sample magnetometer (VSM), and their morphology and powder agglomeration was observed by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). Superior magnetic properties of the sample synthesized with glycine were achieved. Urea gave the smallest particle size, while citric acid produced intermediate properties.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
350--358
Opis fizyczny
Bibliogr. 34 poz., tab., rys.
Twórcy
autor
- Department of Materials Science and Engineering, College of Engineering, Saveh Branch, Islamic Azad University, Saveh, Iran
autor
- Materials Engineering Department, Imam Khomeini International University, Qazvin 34148 - 96818, Iran
Bibliografia
- [1] SEYYED EBRAHIMI S.A., MASOUDPANAH S.M., J. Magn. Magn. Mater, (2014), 77.
- [2] GIMENES R., BALDISSERA M.R., DA SILVA M.R.A., DA SILVEIRA C.A., SOARES D.A.W., PERAZOLLI L.A., DA SILVA M.R., ZAGHETE M.A., Ceram. Int, 1 (2012), 741.
- [3] SUTKA ANDRIS., MEZINSKIS GUNDARS., Front. Mater. Sci, 2 (2012), 128.
- [4] GHOBEITI HASAB M., EBRAHIMI S.A., BADIEI A., J. Non.-Cryst. Solids, 8-10 (2007), 814.
- [5] MURUGESAN C., MDGAZZALI P.M., CHANDRASEKARAN G., J. Mater. Sci.- Mater. El, 8 (2013), 3136.
- [6] HAJARPOUR S., GHEISARI KH., HONARBAKHSH RAOUF A., J. Magn. Magn. Mater, 329 (2013), 165.
- [7] TONOILO J.C., LIMA M.D., TAKIMI A.S., BERGMANN C.P., Mater. Res. Bull, 3 (2005), 561.
- [8] VASANTHI V., SHANMUGAVANI A., SANJEEVIRAJA C., KALAI SELVAN R., J. Magn. Magn. Mater, 13 (2012), 2100.
- [9] HWANG C.C., TSAI J.S., HUANG T.H., Mater. Chem. Phys, 2-3 (2005), 330.
- [10] PEDZICH Z., BUCKO M.M., KROLIKOWSKI M., BAKALARSKA M., BABIARZ J., J. Eur. Ceram. Soc, 6 (2004), 1053.
- [11] HOU J.G., QU Y.F., MA W.B., SUN Q.C., J. Sol.-Gel. Sci. Techn, 1 (2007), 15.
- [12] BAKHSHI H., SHOKUHFAR A., SEYYED AFGHAHI S.S., Ceram. Int, 9 (2015), 10736.
- [13] MOTEVALIAN A., SALEM S., Particuology, (2016), 108.
- [14] MOHAMED R.M., RASHAD M.M., HARAZ F., SIGMUND W., J. Magn. Magn. Mater, 14 (2010), 2058.
- [15] RASLY M., RASHAD M.M., J. Magn. Magn. Mater, (2013), 58.
- [16] RASHAD M.M., TURKY A.O., KANDIL A.T., J. Mater. Sci.- Mater. El, 9 (2013) 3284.
- [17] RASHAD M.M., J. Mater. Sci.- Mater. El, 4 (2012), 882.
- [18] BAHADUR D., RAJAKUMAR S., KUMAR A., J. Chem. Sci, 1 (2006), 15.
- [19] ABU EL FADL A., HASSAN A.M., MAHMOUD M.H., TATARCHUK T., YAREMIY I.P., GISMELSSED A.M., AHMED M.A., J. Magn. Magn. Mater, (2019), 192.
- [20] AHMED M.A., HASSAN H.E., ELTABEY M.M., LATLA K., TATARCHUK T.R., Physica. B, (2018), 195.
- [21] RAJESH BABU B., TATARCHUK T., Mater. Chem. Phys, (2018) 534.
- [22] KANE S.N., RAGHUVANSHI S., SATALKAR M., REDDY V.R., DESHPANDE U.P., TATARCHUK T.R., MAZALEYRAT F., AIP. Conf. Proc, 1 (2018), 030089.
- [23] TATARCHUK TETIANA., BOUOUDINA M., JUDITH VIJAYA J., JOHN KENNEDY L., Nanophysics, Nanomaterials, Interface Studies, and Applications, Springer, Lviv, 2016.
- [24] HU P., YANG H.B., PAN D.A., WANG H., TIAN J.J., ZHANG S.G., WANG X.F., A.VOLINSKY A., J. Magn. Magn. Mater, 1 (2010) 173.
- [25] BAKHSHI H., SHOKUHFAR A., VAHDATI N., Int. j. Min. Met. Mater, 9 (2016), 1104.
- [26] WAQAS H., QURESHI A.H., J. Therm. Anal. Calorim, 2 (2009), 355.
- [27] COSTA A.C.F.M, MORELLI M.R., KIMINAMI R.H., J. Mater. Synth. Process, 6 (2001), 347.
- [28] COSTA A.C.F.M., SILVA V.J., XIN C.C., VIERA D.A., CORNEJO D.R., KIMINAMI R.H.G.A., J. Alloy. Compd, 2 (2010), 503.
- [29] TATARCHUK T.R., BOUOUDINA M., PALIYCHUK N.D., YAREMIY I.P., MOKLYAK V.V., J. Alloy. Compd, (2017), 777.
- [30] TATARCHUK T.R., PALIYCHUK N.D., BOUOUDINA M., AL NAJAR B., PACIA M., MACYK W.,SHYICHUNK A., J. Alloy. Compd, (2018), 1256.
- [31] SZCZYGIEL I., WINIARSKA K., BIEN KO A., SURACKA K., GAWORSKA KONIAREK D., J. Alloy. Compd, (2014), 1.
- [32] MAENSIRI S., CHIVALRAT M., BOONCHOM B., SERAPHIN SUPAPAN., Scripta. Mater, 9 (2007), 797.
- [33] GABAL M.A., ABDEL DAIEM A.M., AL ANGARI Y.M., ISMAIL I.M., Polyhedron, (2013), 105.
- [34] WANG W., ZANG C., JIAO Q., J. Magn. Magn. Mater, (2014), 116.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d3ae977b-ff5d-4922-8613-1c43bbaf6eca