Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
A Hamiltonian model of an electromechanical actuator requires approximation of its flux-current characteristic. It can be made using a simplicial approximation, which requires the sets of corresponding points in the spaces of currents and fluxes. These points can be chosen from the trajectories that describe the behaviour of the electromechanical system in these spaces. In the paper, a method of obtaining these trajectories by measurements is shown and four original methods of choosing points lying on them to construct the required points sets are presented. The sets are constructed so that they contain a possibly small number of points, but the approximation which is based on them is precise. The presented methods are used to approximate a flux-current characteristic of the prototype synchronous reluctance machine. The simulation results, computed using the models based on these approximations, are also presented and discussed. The best results are obtained by methods using the computed value of the magnetic field coenergy in the modelled machine.
Wydawca
Czasopismo
Rocznik
Tom
Strony
49--54
Opis fizyczny
Bibliogr. 7 poz., rys., tb., wykr., wzory
Twórcy
autor
- Department of Mechatronics, Faculty of Electrical Engineering Silesian University of Technology, Krzywoustego 2, 44-100 Gliwice
Bibliografia
- [1] Burlikowski W.: Hamiltonian model of electromechanical actuator in natural reference frame. Part 1&2, Archives of Electrical Engineering, vol. 60(3), pp. 317-348, 2011.
- [2] Agoston M. K..: Computer Graphics and Geometric Modeling - Mathematics, Springer, 2005.
- [3] Rodrigues L., How J. P.: Observer-Based Control of Piecewise-Affine Systems, Decision and Control, 2008.
- [4] Burlikowski W., Kohlbrenner L.: The Measurement Test for the Identification of Current – Flux Linkage Characteristics in Synchronous Reluctance Motors. Measurement Automation Monitoring, vol. 01/2016, pp. 33-36, 2016.
- [5] Groff R. E.: Piecewise Linear Homeomorphisms for Approximation of Invertible Maps. PhD thesis, University of Michigan, 2003.
- [6] Shifrin T.: Differential Geometry: A First Course in Curves and Surfaces, University of Georgia, 2015.
- [7] Burlikowski W., Kowalik Z.: Error Analysis in Mathematical Model of Electromechanical Actuator Using Hamiltonian Equations, Technical Transactions, vol. 1-E/2015, 2015.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d3aad617-305a-4b5a-b8f8-617cc9bac706