Vibration control using a modern control system for hybrid composite flexible robot manipulator Arm

• Autorzy: Ramalingam S. , Mohideen S. Rasool

Identyfikatory

DOI

10.14313/JAMRIS/2-2022/14

• Języki publikacji: EN

Abstrakty

EN

In this research, a model of a robotic manipulator flexible structure and an equation of motion for controller design is planned. The structural material chosen for the robot structure was a hybrid composite. A comparison study was carried out for the aluminium 6082 alloy for the flexible manipulator arm application. Vibration behavior and control implementation was analyzed by adding joint flexibility in the system. Using a simulation algorithm, the system parameter calculation is carried out through MATLAB software for vibration amplitude, transient period, steady-state error, and settling time of flexible robotic arm system. In a systematized motion equation, flexible robotic deflections are organized via the assumed mode (AM) and Lagrange techniques (LT). The graph analysis of hybrid composite and AL6082 materials with high stiffness coefficients is plotted. These obtained values from the plot are utilized for Linear Quadratic Regulator (LQR) controller design. The LQR output facts for both aluminium structural robotic arm and composite material robotic arms are established.

Słowa kluczowe

EN

composite material; Al6082 alloy; simulation analysis; vibration amplitude; LQR controller

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2022
• Tom: Vol. 16, No. 2
• Strony: 36--45
• Opis fizyczny: Bibliogr. 22 poz., rys.

Twórcy

autor

Ramalingam S.

• AMET University, Department of Mechanical Engineering, Chennai, India

autor

Mohideen S. Rasool

• School of Mechanical Science, BSA Crescent Institute of Science and Technology, Chennai, India-48

Bibliografia

• [1] M. Kalyoncu, “Mathematical modeling and dynamic response of a multi straight-line path tracing flexible robot manipulator with rotating-prismatic joint”, Applied mathematical modeling, vol. 32, no. 6, 2008, pp. 1087–98. DOI: 10.1016/j.apm.2007.02.032
• [2] M. A Ahmad, M. A Zawawi, “Effect of beam’s length on the dynamic modeling of flexible manipulator system”, 11th International Conference on Computer Modeling and Simulation, IEEE, 2009, pp. 356–61. DOI: 10.1109/UKSIM.2009.59
• [3] M. H. Korayam, A. M. Shafei, S. F. Dehkordi, “Dynamic effect of beam’s length and beam’s theory on the flexible manipulator system”, International Research Journal of Applied and Basic Sciences, vol. 3, no. 7, 2012, pp. 1527–34, http:// www. irjabs.com.
• [4] Rishi Raj, Prabhat Kumar Sinha, Earnest Vinay Prakash, “Modeling, simulation and analysis of cantilever beam of different material by finite element method, Ansys & MATLAB”, International Journal of Engineering Research and General Science, vol. 3, no. 3, May-June, 2015, p. 89.
• [5] E. Pereira, J. Becedas, I. Payo, F. Ramos, F., V. Feliu, V, “Control of Flexible Manipulators”, Theory and Practice, Universidad de Costilla-La Mancha, ETS Ingenious Industrials, Ciudad Real, Spain, 2010, pp. 278–9.
• [6] S. K. Dwivedy, Peter Eberhard, “Dynamic analysis of flexible manipulators, a literature review,” Mechanism and Machine Theory, vol. 7, no. 41, 2006, pp. 749–77. DOI: 10.1016/j.mechmachtheory.2006.01.014
• [7] S. Ozgoli, H. D. Taghirad, “A Survey on the control of flexible joint robots”, (1986-2001), Asian Journal of Control, vol. 8, 2006, pp. 1–15. DOI:10.1111/j.1934-6093. 2006.tb00285.x
• [8] O.P. Kanna, “Material science and metallurgy,” Dhanpat Rai Publication, Third Edition, 2009, pp. 23.1–23.31.
• [9] S. Ramalingam, S. Rasool Mohideen, et al., “Hybrid polymer composite material for robotic manipulator subject to single link flexibility,” International Journal of Ambient Energy, 2019. DOI: 10.1080/01430750.2018.1557551
• [10] R. Roy, CARIG, Jr., “Structural dynamics and introduction to computer methods,” John Wiley, 1981, p. 202. asmedigitalcollection.asme.org.
• [11] S. Ramalingam, S. Rasool Mohideen, “Numerical Analysis of Robotic Manipulator Subject to Mechanical Flexibility by Lagrangian Method”, Proc. Natl. Acad. Sci., India, Sect. A: Phys. Sci., 2019. doi.org/10.1007/s 40010-019-00619-2
• [12] S. Ramalingam, S. Rasool Mohideen, S., “Advanced structural fibre material for single link robotic manipulator simulation analysis with flexibility”, Journal of Automation, Mobile Robotics and Intelligent Systems, 2019, vol. 13, no. 4, 2019, pp. 38–46. DOI: 10.14313/JAMRIS/4-2019/36
• [13] M.O. Tokhi, et al, “Flexible robot manipulators, modeling simulation and control”, IET, Control Engineering Series, vol. 68, 2008, pp. 23–33. ISBN:978-0-86341-488-0.
• [14] Katsuhiko Ogata., Modern control engineering, PHI publication, Fifth Edition, 2010, pp. 159–225.
• [15] S. Ramalingam, S. Rasool Mohideen, P.S. Sridhar, “Composite material robot manipulator with joint flexibility-Mode and mode shape simulation,” International Journal of Recent Technology and Engineering, 2019, vol. 8, 4: pp. 902–909, DOI:10.35940/ijrte. D7513.118419
• [16] M. Joel Esposito, et. al, “Role of a MATLAB real-time hardware interface within a system modeling course”, Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, 2004, P.5.
• [17] S. Ramalingam, S. Rasool Mohideen, S. Sounder Rajan, P.S. Sridhar, “Experimental of hybrid polimer composite material robotic single link flexible manipulator”, IJITEE, vol.9, no. 3, 2020, pp. 488–494. DOI: 10.35940/ijitee.C8461.019320
• [18] Kuldeep Jayaswal, D. K. Palwalia, Suboth Kumar, “Analysis of robust control method for the flexible manipulator in reliable operation of medical robots during COVID-19 pandemic,” Microsystem Technologies, vol. 27, 2021, pp. 212, 116. DOI: 10.1007/s00542-020-05028-9
• [19] Dipendra Subedi, Ilya Tyapin, Geir Hovland, “Review on modeling and control of flexible link manipulators,” Modelling, Identification and Control, vol. 41, no. 3, 2020, pp. 141–63.
• [20] S. Ramalingam, “Dynamic modeling, simulation and analysis of single link robotic manipulator with flexibility”, PhD thesis, June 2019, pp. 1034.
• [21] Hafiz Muhammad Wahaj Aziz, Jamshed Iqbal, “Flexible Joint Robotic Manipulator: Modeling and Design of Robust Control Law” IEEE, 978-1-5090-4059-9/16, pp. 63–68, 2016. DOI: 10.1109/ICRAI.2016.7791230
• [22] Waqar Alam, Nihad Ali, Hafiz Muhammad Wahaj Aziz, Jamshed Iqbal, “Control of flexible joint robotic manipulator: design and prototyping” IEEE, 2018, 978-1-5386-0922-4/18.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).