PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Dendritic Structure Analysis of CMSX-4 Cored Turbine Blades Roots

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The microstructure of as-cast cored turbine blades roots, made of the single-crystal CMSX-4 nickel-based superalloy was investigated. Analysed blades were obtained by directional solidification technique in the industrial ALD Bridgman induction furnace. The investigations of the microstructure of blades roots were performed using SEM and X-ray techniques including diffraction topography with the use of Auleytner method. Characteristic shapes of dendrites with various arrangement were observed on the SEM images taken from the cross-sections, made transversely to the main blades axis. The differences in quality of the structure in particular areas of blades roots were revealed. Based on the results, the influence of cooling bores on blades root structure was analysed and the changes in the distribution and geometry of cooling bores were proposed.
Twórcy
autor
  • University of Silesia, Institute of Materials Science, 1a 75 Pułku Piechoty Str., 41-500 Chorzów, Poland
Bibliografia
  • [1] R. C. Reed, The Superalloys, Fundamentals and Applications, Cambridge University Press, Cambridge 2006.
  • [2] J. C. Williams, E. A. Strake, Acta Mater. 51, 5775 (2003).
  • [3] M. J. Donachie, S. J. Donachie, Superalloys, a Technical Guide, ASM International, Ohio 2002.
  • [4] W. Betteridge, S.W.S. Shaw, Development of superalloys, J. Mater. Sci. Technol. 3, 682 (1987).
  • [5] J-Ch. Han, S. Dutta, S. Ekkad, Heat transfer and cooling technology, CRC Press, Boca Raton, USA (2013).
  • [6] A. Onyszko, W. Bogdanowicz, J. Sieniawski, Solid State Phenom. 186, 151 (2012).
  • [7] E. Sun, T. Heffernan, R. Helmink, Stres rupture and fatigue in thin wall single crystal superalloys with cooling holes in: Superalloys 2012, Eric S. Huron (Ed.), TMS, Willey (2012).
  • [8] A. Onyszko, J. Sieniawski, W. Bogdanowicz, H. Berger, Solid State Phenom. 177, 203-204 (2013).
  • [9] B. Dubiel, Zmiany mikrostruktury podczas pełzania monokrystalicznych nadstopów niklu, Wydawnictwa AGH, Kraków 2011.
  • [10] C. Walter, B. Hallstedt, N. Warnken, Mat. Sci. Eng. A-Struct. 397, 385 (2005).
  • [11] M. Durand-Charre, The Microstructure of Superalloys, CRC Press, London 1997
  • [12] Z. Trzaska Durski, H. Trzaska Durska, Podstawy krystalografii strukturalnej i rentgenowskiej, PWN Warszawa 1994.
  • [13] J. Auleytner, Acta Phys. Pol. A 17, 111 (1958).
  • [14] W. Bogdanowicz, Scripta Mater. 31(6), 829 (1997).
Uwagi
EN
The author would like to thank the management and employees of the Department of Materials Science and Research & Development Laboratory for Aerospace Materials. Rzeszow University of Technology for the cooperation and valuable help.
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d36f2c68-fc10-4b1a-ad18-459b2167fdc4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.