Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
One of the directions of the heavy duty machine is the operator cabin construction, which provides a high level of comfort. Adequate control of active suspension drives can reduce low frequency and large amplitude vibrations occurring in a number of cabin degrees of freedom. The main link of the mechanism is the platform with cab suspended on two rockers and one actuator. Article proposes methods for determining the length of suspension arms, the width of the platform and centres of the joints, which are connected to the suspension. It has been proved for the flat case that if the momentary centre of rotation of the platform relative to the machine frame is located inside the road roughness zone is a single drive can effectively reduce transverse vibration and angle vibration around the longitudinal machine axis. Further conditions that determine links size are to prevent from peculiar positions, to avoid collision between cab wall and suspension joints. Presented relations between the height of the waist rough roads, wheelbase machine, cab mounting height on the machine and the dimensions of the link suspension mechanism. Presented dimensional calculation results cab suspension links dedicated to Caterpillar 924 GZ loader. Assuming the vertical driving cab calculated inaccuracy of its transverse displacements. Presented the results showing influence of the cab assembly height on the cabin mounting links dimensions.
Wydawca
Czasopismo
Rocznik
Tom
Strony
47--53
Opis fizyczny
Bibliogr. 8 poz., rys.
Twórcy
autor
- Cracow University of Technology Institute of Machine Design Jana Pawła II Av. 37, 31-864 Krakow, Poland tel.: +48 12 6283408, fax: +48 12 3743360
autor
- Cracow University of Technology Institute of Machine Design Jana Pawła II Av. 37, 31-864 Krakow, Poland tel.: +48 12 6283408, fax: +48 12 3743360
Bibliografia
- [1] Achen, A., Toscano, J., Marjoram, R., StClair, K., McMahon, B., Goelz, A., Shutto, S., Semiactive Vehicle Cab Suspension Using Magnetorheological (MR) Technology, Proc. of the 7th JFPS Int. Symp. on Fluid Power, TOYAMA, pp. 561-564, 2008.
- [3] Graf, Ch., Maas, J., Pflug, H.-Ch., Concept for an Active Cabin Suspension, Proceedings of the 2009 IEEE International Conference on Mechatronics, Malaga, Spain 2009.
- [4] Hannson, P.-A., Control Algorithms for Active Cab Suspensions on Agricultural Tractors, Vehicle System Dynamics, Vol. 25, pp. 431-461, 1996.
- [5] Jonasson, M., Roos, F., Design and Evaluation of an Active Electromechanical Wheel Suspension System, Mechatronics, Vol. 18, pp. 218-230, 2008.
- [6] Lofgren, B., Active Cab Suspension, Skog Forsk Resultad, Vol. 17, 1995.
- [7] Sampaio, J. V. R., Design of a Low Power Active Truck Cab Suspension, Eindhoven University of Technology, Department of Mech. Engineering, Dynamics and Control, 2009.
- [8] Tora, G., Simulations of the Active Cab Suspension, Journal of KONES Powertrain and Transport, Vol. 19, No. 1, pp. 453-464, 2012.
- [9] Yun, Y., Li, Y., A General Dynamics and Control Model of a Class of Multi-DOF Manipulators for Active Vibration Control, Mech. Mach. Theory doi:10.1016/j.mechmachtheory, 2011.04.010., 2011.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d2f494de-5a97-41ea-9b06-b256cb40354e