PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The analysis of the calculation process related to labyrinth sealing with extraction

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The work presents a calculation process enabling one-dimensional numerical calculations of labyrinth sealing. A DSV program determines the thermodynamic parameters of gas in the sealing chambers with extraction. The influence of the sealing length upon the stability of a matrix solution of the system of equations with the use of Cond(C) parameter is analysed. Next, the operation of the software extended with a module that enables determination of the initial pressure p0, to which the assumed mass flow for a set geometry and sealing length would correspond is discussed. The work analyzes Cond(C) and initial pressure values for various sealing lengths with an assumed leak value. The work also compares the values of static pressures on the extraction plane, as obtained from the measurements, to theoretically calculated values. The calculations and comparisons were made for various heights of incomplete sealing fissures.
Rocznik
Strony
1057--1066
Opis fizyczny
Bibliogr. 13 poz., rys., tab., wykr.
Twórcy
  • Poznan University of Technology, Chair of Thermal Engineering ul. Piotrowo 3, 60-965 Poznań, POLAND
  • Poznan University of Technology, Chair of Thermal Engineering ul. Piotrowo 3, 60-965 Poznań, POLAND
autor
  • Poznan University of Technology, Chair of Thermal Engineering ul. Piotrowo 3, 60-965 Poznań, POLAND
Bibliografia
  • Anker J.E., Mayer J.F. and Casey M.V. (2012): Impact of rotor labyrinth seal leakage flow on the loss generation in an axial turbine engineering. - International Journal of Power and Energy Systems. - Procedings of the Institution of Mechanical Engineers, vol.219, Part A, pp.481-490.
  • Bjorck A. and Dahlquist G. (1987): Numerical Methods (in Polish). - Warsaw: PWN.
  • Gamal Eldin A.M. (2007): Leakage and rotordynamic effects of pocket damper seals and see-through labyrinth seals - Dissertation, Texas A&M University, USA, December.
  • Joachimiak D. (2013a): The Labyrinth Seals Research With Extraction (in Polish). - Dissertation, Poznan University of Technology.
  • Joachimiak D. and Krzyślak P. (2011): Calculation of labyrinth seals with extraction. - International Journal of Applied Mechanics and Engineering, vol.16, No.1, pp.5-14.
  • Joachimiak D., Joachimiak M. and Krzyślak P.(2013b): Description program Dlawnica used for calculations labyrinth seals (in Polish). - Journal of Mechanical and Transport Engineering, No.65, pp.25-35.
  • Kosma Z. (2008): Numerical Methods in Engineering Applications (in Polish). - Radom: University Press.
  • Krzyślak P. and Winowiecki M. (2008): A method of diagnosing labyrinth seals in fluid-flow machines. - Polish Maritime Research, No.3 (57), vol.15, pp.38-41, 10.2478/v10012-007-0081-2.
  • Krzyślak P. and Winowiecki M. (2006): RP Patent Office: P-379431 - Acknowledgement of patent submission. Flow seal in a fluid-flow machine and method of its diagnostics (in Polish), Warsaw.
  • Maćkiewicz A. (2002): Linear Algebra Algorithms, Direct Methods (in Polish). - Poznan University of Technology Press.
  • Tipton D.L., Scott T.E. and Vogel T.E. (1985): Analytical and Experimental Development of a Design Model for Labyrinth Seals. - Air Force Wright Aeronautical Laboratories, Allison Gas Turbine-Division of General Motors Corporation.
  • Trütnovsky K. (1964): Berührungsfreie Dichtungen, Grundlagen und Anwendungen der Strömung durch Spalte und Labyrinthe. - VDI-Verlag bh Düsseldorf, Verlag des Vereins Deutscher Ingenieure.
  • Winowiecki M. (2009): The Method of Diagnosing Labyrinth Seals On Machines (in Polish). - Dissertation, Poznan: University of Technology.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d2e19dc5-7b69-40e8-b1b6-f26d40b3460c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.