Evaluation of Material Data to the Numerical Strain‑Life Analysis of the Compressor Blade Subjected to Resonance Vibrations

• Autorzy: Bednarz Arkadiusz

Identyfikatory

DOI

10.12913/22998624/117115

• Języki publikacji: EN

Abstrakty

EN

This paper presents the impact of selecting the fatigue material model on the numerically determined fatigue life of a compressor blade. In the work, the first stage compressor blade of the PZL‑10W turbine engine was used. The research object contained a geometric notch with a known location and shape. In numerical studies, 8 fatigue estimation methods were used in the ε ‑N analysis (based on the Manson‑Coffin‑Basquin model). At the same time, three methods for estimating material constants associated with the cyclic hardening were employed. On the basis of the selected models, 24 sets of fatigue parameters were obtained, which were used in numerical studies. The numerical tests were carried out under resonant conditions with amplitudes of 1.5 and 1.8 mm. The numerical tests were confirmed by the experimental fatigue tests. As a result of the above‑mentioned tests, the impact of selecting the material fatigue model and hardening model on the obtained results was determined and they were referred to the initiation of the crack with the length a = 0.2 mm (achieved during experimental studies). The obtained results will constitute the basis for further fatigue tests.

Słowa kluczowe

EN

fatigue life; crack initiation; vibrations; strain‑life; compressor blade; strain hardening

PL

trwałość zmęczeniowa; inicjacja pęknięć; wibracje; trwałość; łopatka sprężarki; umocnienie odkształceniowe

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2020
• Tom: Vol. 14, no 1
• Strony: 184--190
• Opis fizyczny: Bibliogr. 15 poz., fig., tab.

Twórcy

autor

Bednarz Arkadiusz

• Rzeszow University of Technology, Al. Powstancow Warszawy 8, 35‑959 Rzeszow, Poland

Bibliografia

• 1. Browell R. and Hancq A. Calculating and Displaying Fatigue Results. ANSYS Inc., 2006.
• 2. Chengzong L., Zhiyong Z., Xin C. and Yuanxiao S. Low Cycle Fatigue Analysis and Experiment of Steel Specimens with Stress Concentration. Journal of Applicatied Mechanics, 17(3), 2000, 107–110.
• 3. Dowling N.E. Mean Stress Effects in Stress Life and Strain Life Fatigue. Blackburg: Virginia Polytechnic Institute and State University, F2004/51, 2004.
• 4. Hunecke K. Jet Engine: Fundamentals of theory, design and operation. Airlife Publishing, England, 2014.
• 5. Jakubowski R. Evaluation of performance properties of two combustor turbofan engine; Eksploatacja i Niezawodność 17(4), 2015, 575–581.
• 6. Lichoń D. and Bednarz A. The study on algorithm for identification the fatigue crack length of compressor blade based on amplitude frequency resonant characteristics. Journal of Kones 24, 2017, 156–164.
• 7. Meggiolaro M.A. and Castro J.T.P. Statistical evaluation of strain life fatigue crack initiation predictions. International Journal of Fatigue, 26, 2004, 463–476.
• 8. Mazurek P. Fatigue Strength of Thin Walled Rectangular Elements in the State of Post Critical Deformation. Advances in Science and Technology Research Journal,13(2), 2019, 84–91.
• 9. Mihaliková M., Lišková A., Vojtko M. and Kvačkaj T. Research of fatigue and mechanical properties AlMg1SiCu aluminium alloys. Advances in Science and Technology Research Journal, 9(28), 2015, 56–60.
• 10. Nakhodchi S. and Salimpour M.E. Fatigue life prediction in damaged and un damaged compressor blades. Engineering Solid Mechanics, 2, 2013, 43–50.
• 11. Neimitz A., Galkiewicz J., Lipiec S. and Dzioba I. Estimation of the Onset of Crack Growth in Ductile Materials. Materials 10, 2018.
• 12. Puchała K., Szymczyk E., and Jachimowicz J. Modelowanie laminatów w praktyce inżynierskie. Przegląd Mechaniczny 3, 2019, 29–34.
• 13. Stephens R.I., Fatemi A., Stephens R.R. and Fuchs H.O. Metal Fatigue in Engineering. John Wiley& Sons, Ottawa, Canada, 2000.
• 14. Witek L. Numerical stress and crack initiation analysis of the compressor blades after foreign object damage subjected to high cycle fatigue. Engineering Failure Analysis, 18, 2011, 2111–2125.
• 15. Witek L., Bednarz A. and Stachowicz F. Fatigue analysis of compressor blade with preliminary defect. Engineering Failure Analysis 58, 2015, 229–237.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).