Numerical model of the nanoindentation test based on the digital material representation of the Ti/TiN multilayers

• Autorzy: Perzyński K. , Wiatr R. , Madej Ł.

Identyfikatory

DOI

10.1515/msp-2015-0052

• Języki publikacji: EN

Abstrakty

EN

The developed numerical model of a local nanoindentation test, based on the digital material representation (DMR) concept, has been presented within the paper. First, an efficient algorithm describing the pulsed laser deposition (PLD) process was proposed to realistically recreate the specific morphology of a nanolayered material in an explicit manner. The nanolayered Ti/TiN composite was selected for the investigation. Details of the developed cellular automata model of the PLD process were presented and discussed. Then, the Ti/TiN DMR was incorporated into the finite element software and numerical model of the nanoindentation test was established. Finally, examples of obtained results presenting capabilities of the proposed approach were highlighted.

Słowa kluczowe

EN

pulsed laser deposition; nanolayers; nanoindentation; digital material representation

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2015
• Tom: Vol. 33, No. 2
• Strony: 348--355
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Perzyński K.

• Department of Applied Computer Science and Modeling, AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Cracow, Poland

autor

Wiatr R.

• Department of Applied Computer Science and Modeling, AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Cracow, Poland

autor

Madej Ł.

• Department of Applied Computer Science and Modeling, AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Cracow, Poland

Bibliografia

• [1] MAJOR B., Ablacje i osadzanie laserem impulsowym, Akapit, Krak´ow, 2002.
• [2] SARNA J., KUSTOSZ R., MAJOR R., LACKNER J.M., MAJOR B., B. Pol. Acad. Sci.-Tech., 58 (2010), 329.
• [3] MAJOR B., Materials science in heart disease treatment, Nanostructural materials for implants and cardiovascular biomedical devices, CARDIOBIOMAT, 2012.
• [4] MADEJ L., WANG J., PERZYNSKI K., HODGSON P.D., Comp. Mater. Sci., 95 (2014), 651.
• [5] PERZYNSKI K., MADEJ L., WANG J., KUZIAK R., HODGSON P.D., Metall. Mater. Trans. A, 45 (2014), 5852.
• [6] THORNTON J.A., J. Vac. Sci. Technol., 11 (1973), 666.
• [7] MA K. J., BLOYCE A., BELL T., School Metall. Mater., 76 – 77 (1995), 297.
• [8] VARST VAN DER P.G.T., WITH DE G., Thin Solid Films, 384 (2001), 85.
• [9] BHOWMICK S., KALE A.N., JAYARAM V., BISWAS S.K., Thin Solid Films, 436 (2003), 250.
• [10] MA L., CAIRNEY J., MCGROUTHER D., HOFFMAN M., MUNROE P., Thin Solid Films, 515 (2007), 3190.
• [11] TILBROOK M.T., PATON D.J., XIE Z., HOFFMAN M., Acta Mater., 55 (2007), 2489.
• [12] LACKNER J., WALDHAUSER W. ALAMANOU A., TEICHERT C., SCHMIED F., MAJOR L., MAJOR B., B. Pol. Acad. Sci.-Tech., 58 (2010), 281.
• [13] MAJOR L., Arch. Civ. Mech. Eng., 14 (2014), 615.
• [14] LICHINCHI M., LENARDI C., HAUPT J., VITALI R., Thin Solid Films, 312 (1998), 240.
• [15] HUANG X., PELEGRI A.A., Compos. Sci. Technol., 67 (2007), 1311.
• [16] PELEGRI A.A., HUANG X., Compos. Sci. Technol., 68 (2008), 147.
• [17] KOPERNIK M., MILENIN A., MAJOR R., LACKNER J.M., Mater. Sci. Tech.-Lond., 27 (2011), 604.
• [18] ZHANG Q., ZHU J., TAN J., YU G., WU J., ZHU J., XIAO D., Vacuum, 81 (2006), 539.
• [19] TAN X., ZHOU Y. C., ZHENG X. J., Surf. Sci., 588 (2005), 175.
• [20] WARRENDER J. M., AZIZ M. J., Appl. Phys. A-Mater., 79 (2004), 713.
• [21] SHIN B., Study of Thin Film Growth Kinetics of Homoepitaxy by Molecular Beam Epitaxy and Pulsed Laser Deposition, Harvard University Cambridge, Cambridge, 2007.
• [22] MAJOR L., MORGIEL J., MAJOR B., LACKNER J.M., Surf. Coat. Tech., 200 (2006), 6190.
• [23] SZYNDLER J., MADEJ Ł., Comp. Mater. Sci., 96 (2015), 200.
• [24] PERZYNSKI K., MAJOR Ł., KOPERNIK M., MADEJ Ł., PIETRZYK M., In˙zynieria Materiałowa, 31 (2010), 735.
• [25] KRUZEL F., MADEJ L., PERZYNSKI K., BANAS K., Int. J. Multiscale Com., 12 (2014), 257.