The Method of In Plane Generating Trajectories for Tools which Generate by Enveloping Application in CATIA

• Autorzy: Teodor V. , Paunoiu V. , Berbinschi S. , Baroiu N. , Oancea N.
• Języki publikacji: EN

Abstrakty

EN

The method of “in-plane generating trajectories” is a method designed to study the enveloping profiles associated with a pair of rolling centrodes. This method assumes knowledge the analytical form of the in-planes trajectories described by the points onto the profiles to be generated. These trajectories are known in the reference system of the generating tool, which may be a rack-gear, a gear-shaped or a rotary cutter tool. The envelope of these trajectories represents the profile of the generating tool. An original method for determining the enveloping condition is presented in this paper. Application for ordered curling of non-involute profiles were developed based on the specific enveloping condition. A new solution is proposed. This solution uses the capabilities of the CATIA graphical environment. Graphical solutions are proposed versus analytical solutions in order to validate the proposed method.

Słowa kluczowe

EN

in-plane generating trajectories; CATIA; rolling generating tools

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2015
• Tom: Vol. 15, No. 4
• Strony: 69--80
• Opis fizyczny: Bibliogr. 14 poz., tab., rys.

Twórcy

autor

Teodor V.

• University Dunarea de Jos of Galati, Department of Manufacturing Engineering, Romania

autor

Paunoiu V.

• University Dunarea de Jos of Galati, Department of Manufacturing Engineering, Romania

autor

Berbinschi S.

• University Dunarea de Jos of Galati, Mechanical Engineering Department, Romania

autor

Baroiu N.

• University Dunarea de Jos of Galati, Department of Manufacturing Engineering, Romania

autor

Oancea N.

• University Dunarea de Jos of Galati, Department of Manufacturing Engineering, Romania

Bibliografia

• [1] BAICU I., 2002, Graphic algorithm to profile generating tools by the rolling method of compound profiles, “Ghe. Asachi” Technical University, Iaşi, Tome LVIII (LII), 301-305.
• [2] BERBINSCHI S., TEODOR V., FRUMUŞANU G., OANCEA N., 2014, Graphical method for profiling the tools wich generate internal surface by rolling, Academic Journal of Manufacturing Engineering - AJME, 12, 12-17.
• [3] FRUMUŞANU G., TEODOR V.G., OANCEA N., Graphical Method in CATIA to Profile the HOB Mill for Generating the Slitting Saw Cutter Teeth, Applied Mechanics and Materials, 811, 85-91, Trans Tech Publications, ICMERA 2015, doi:10.4028/www.scientific.net/AMM.811.85.
• [4] LITVIN F.L., 1984, Theory of gearing, Reference Publication 1212, NASA, Scientific and Technical Information Division, Washington D.C.
• [5] OANCEA N., 2004, Surfaces generation by enwrapping, Vol. I, II, Ed. Fundaţiei Universitare „Dunarea de Jos” - ISBN 973-627-170-6, Galaţi.
• [6] POPA, C.L., TEODOR V.G., 2014, Graphical method in AutoCAD for profiling tools for generation of helical surfaces, The Annals of “Dunarea de Jos” University of Galati, Fascicle V, ISSN 1221-4558, 9-12.
• [7] RADZEVICH S.P., 2008, Kinematic geometry of surface machining, CRC Press, Boca Raton, London, New York.
• [8] TEODOR V.G., 2010, Contribution to elaboration method for profiling tools which generate by enveloping, ISBN 978-3-9433-8261-8, Lambert Academic Publishing.
• [9] TEODOR V.G, PAUNOIU V., BERBINSCHI S., OANCEA N., 2013, The profiling of rack-gear tool for generation of the helical surfaces, Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies NewTech 2013, Sweden, ISBN 978-91-7501-892-8, 63-72.
• [10] TEODOR V.G., BERBINSCHI S., BAICU I., BAROIU N., OANCEA N., 2014, Graphical complementary theorems of enveloping surfaces, The Annals of “Dunarea de Jos” University of Galati, Fascicle V, ISSN 1221-4558, 75-80.
• [11] LI G., SUN J., LI J., 2014, Process modeling of end mill groove machining based on Boolean method, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-014-6187-7, 75/58, 959-966.
• [12] HAN Q., LIU R., 2014, Theoretical modeling and error analysis for CNC whirling of the helical surfaces of custom screws using common inserts, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, doi: 10.1177/0954406213513573, 228/11, 1948-1957.
• [13] LIU R., ZHU H., 2014, On Helical Projection and Its Application in Screw Modeling, Advances in Mechanical Engineering, doi: 10.1155/2014/901047.
• [14] LU H., LIU Z., WANG S., 2014, Digitization modeling and CNC machining for enveloping surface parts, International Journal of Advanced Manufacturing Technology, 73/1-4, 20 -227, doi: 10.1007/s00170-014-5777-8, 2014