Selected approaches on reliability assessment of complex system with one shot items

• Autorzy: Valis D. , Vintr Z. , Koucky M.
• Języki publikacji: EN

Abstrakty

EN

This paper deals with the modelling and analysis of the reliability of complex systems that use one-shot items during their operation. It includes an analysis of the impact of the reliability of used one-shot items on the resulting reliability of the system as a whole. Practical application of the theoretical knowledge is demonstrated using a model of reliability of an aircraft gun that was used for optimization of the gun’s design during its development and design. Furthermore this paper demonstrates utilization of a proposed model to determine an optimum number of pyrotechnic cartridges that will achieve a required probability of fulfilment of the mission with the given reliability of individual subsystems of the gun, rounds and pyrotechnic cartridges. The proposed procedures of modelling and analysis of the reliability of complex systems with oneshot items were used in practice in designing and development of the PL-20 aircraft gun. Development of the gun was successfully finished in 2005, and the gun was fielded in the armament of the Czech Republic Air Force.

Słowa kluczowe

EN

reliability assessment; complex system; one shot item

• Wydawca: Polskie Towarzystwo Bezpieczeństwa i Niezawodności
• Czasopismo: Journal of Polish Safety and Reliability Association
• Rocznik: 2010
• Tom: Vol. 1, No. 1
• Strony: 265--278
• Opis fizyczny: Bibliogr. 50 poz., rys., tab., wykr.

Twórcy

autor

Valis D.

• University of Defence, Brno, Czech Republic

autor

Vintr Z.

• University of Defence, Brno, Czech Republic

autor

Koucky M.

• Technical University of Liberec, Liberec, Czech Republic

Bibliografia

• [1] Juany, M. Y. (1996). Development Test Programs for 1-Shot Systems: 2-State Reliability and Binary Development-Test Results. IEEE Transaction on Reliability, Vol. 45, No. 3, 379-385.
• [2] d´Apice, C., Manzo, R. & Shorin, S. (2006). Some Bayesian Queueing and Reliability Models Reliability: Theory and Applications, No. 4, 22-29.
• [3] Gasanenko, V. A. (2006). Limit Raring Processes and Rarefaction of Two Interacted Renewal Processes. Reliability: Theory and Applications, No. 4, 30-42.
• [4] Tsitsiashvili, G. Sh. & Osipova, M. A. (2006). Redundancy and Renewal of Servers in Opened Queueing Networks. Reliability: Theory and Applications, No. 3, 26-30.
• [5] Yakov, G. (2006). On Reliability of Renewal Systems with Fast Repair. Reliability: Theory and Applications, No. 3, 31-47.
• [6] Cramer, E. & Kamps, U. (1996). Sequential Order Statistics and k-out-of-n Systems with Sequentially Adjusted Failure Rates. Annual Institution Statistic Mathematics, Vol. 48, No. 3, 535-549. ISSN 0020-3157.
• [7] Cramer, E. & Kamps, U. (2001). Estimation with Sequential Order Statistics from Exponential Distributions. Annals of the Institue of Statistical Mathematics, Vol. 53, no. 2, 307-324. ISSN 0020-3157.
• [8] Liu, Y., English, J. & Pohl, E. (2007). Application of Gene Expression Programming in the Reliability of Consecutive-k-out-of-n: F Systems with Identical Component Reliabilities. Advanced Intelligent Computing Theories and Applications, Vol. 19, N. 3, 217-228.
• [9] Beutner, E. (2007). Nonparametric inference for sequential k-out-of-n systems, Tokyo: The Institute of Statistical Mathematics.
• [10] Shevasuthisilp, S. & Vanderman, S. B. (2004). Development Programs for One-Shot Systems Using Multiple-State Design Reliability Models, <http://www.interscience.com> [cit. 28-06-2004].
• [11] Almaini, A. E. A. (1984). Sequential systems with large input redundancy. International Journal of Electronics, Vol. 56, No. 4, 533-538.
• [12] Andrews, J. D. & Ridley, L. M. (2001). Reliability of sequential systems using the causa-consequence diagram. Proceedings of the Institution of Mechanical Engineers -- Part E -- Journal of Process Mechanical Engineering. Vol. 215, no. 3, 207-220. ISSN 0954-4089.
• [13] Rallis, N. E. & Lansdowne, Z. F. (2001). Reliability Estimation for a Software System with Sequential Independent Reviews. IEEE Transactions on Software Engineerin. 1057-1061. ISSN 0018-9340.
• [14] Chang, H. S. A. (2004). Model for Multitimescaled Sequential Decision-making Processes with Adversary. Mathematical and Computer Modelling of Dynamical Systems, Vol. 10, no. 3-4, s. 287-302.
• [15] Fric, R. & Jakubík, J. (2001). Sequential Convergences on Boolean Algebras Defined by Systems of Maximal Filters. Czechoslovak Mathematical Journal, Vol. 51, no. 2, 261-274.
• [16] Reidys, C. (2001). On Acyclic Orientations and Sequential Dynamical Systems. Advances in Applied Mathematics, Vol. 27, no. 4, 790-804.
• [17] Farjudian, A. (2007). A Language for Sequential Real Number Computation. Theory of computing system, Vol. 41, no. 1, 49-58.
• [18] Freund, R. & Oswald, M. (2007). Modelling Grammar Systems by Tissue P Systems Working in the Sequential Mode. Fundamental informatice, Vol. 76, no. 3, 305-307.
• [19] Ibarra, O. H., Woodworth, S., Yen, H. & Dang, Z. (2006). On the Computational Power of 1-Deterministic and Sequential P Systems Source. Fundamental informatice, Vol. 73, no. 1, 20.
• [20] Laubenbacher, R. & Pareigis, B. (2006). Update schedules of sequential dynamical systems. Discrete applied mathematics, Vol.154, no. 6, 980-995.
• [21] Garcia, L. D., Jarrah, A. S. & Laubenbacher, R. (2006). Sequential dynamical systems over words. Applied mathematics and computation, Vol. 174, no. 1, 500-511.
• [22] Reidys, C. M. (2005). On certain morphisms of sequential dynamical systems. Discrete mathematics, Vol. 296, no. 2, 245-259.
• [23] Wang, Y., Chen, L. & He, G. (2005). Sequential systems of linear equations method for general constrained optimization without stricte complementarity. Journal of computational and applied mathematics, Vol. 182, no. 2, 447-472.
• [24] Huang, M-Y., McBeth, D. & Vardeman, S. B. (1996). Development test programs for 1-shot systems: 2-state reliability and binary development-test results. IEEE Transaction on Reliability, Vol. 45, no. 3, 379-385.
• [25] Moon, J. M., Vardeman, S. B. & McBeth, D. (1999). Development programs for 1-shot systems: Decoupled test and redesigns, with the possibility of design degradation. IEEE Transaction on Reliability, Vol. 48, no. 2, 189-198.
• [26] Hall, B. J. & Mosleh, A. (2008). A reliability growth projection model for one-shot systems. IEEE Transaction on Reliability, Vol. 57, no. 1, 174-181.
• [27] Hall, B. J. & Mosleh, A. (2008). An analytical framework for reliability growth of one-shot systems. Reliability Engineering and System Safety, Vol. 93, Issue 11, 1751-1760.
• [28] Fan, T-H. & Chang, Ch-Ch. (2009). A Bayesian zero-failure reliability demonstration test of high quality electro-explosive devices. Quality and Reliability Engineering International. DOI: 10.1002/qre.1009, URL: <http://www.interscience.willey.com>.
• [29] Sen, A. & Fries, A. (1998). Model misspecification effects within a family of alternative discrete reliability-growth models. Lifetime Data Analysis, Vol. 4, no. 1, 66-81.
• [30] Shevasuthisilp, S. & Vardeman, S. B. (2004). Development programs for one-shot systems using multiple-state design reliability models. Naval Research Logistics. DOI: 10.1002/nav.20033, URL: <http://www.interscience.willey.com>.
• [31] Bonis, A. J. (1977). Reliability growth curves for one shot devices. Proceedings of the Annual Reliability and Maintainability Symposium. 1977, 181-185.
• [32] Turner, R. (2007). Optimized allocation of testing budget for missile defence vehicles. Proceedings of the Annual Reliability and Maintainability Symposium, 250-253.
• [33] Rowvng, J. L., Bai, M. & Liu, Z. Q. (2004). Reliability assessment of pyrotechnical devices under rigorous conditions. Transaction of Beijing Institute of Technology, Vol. 24, Issue 2, 117-120.
• [34] Zhang, S., Cai, H. (2003). Metering methods of reliability evaluation for “one-shot devices”. Proceedings of the 2003 International Autumn Seminar on Propellants, Explosives and Pyrotechnics (2003 IASPEP) – Theory and Practice of Energetic Materials, Vol. 5, 1122-1126.
• [35] Anon. (1992). One-shot reliability-growth program. Proceedings, Annual Technical Meeting – Institute of Environment Science,. Vol. 2, 410-414.
• [36] Lake, E. R., Thompson, S. J. & Drexelius, V. W. (1973). Study of the role of pyrotechnic systems on the space shuttle program, NASA Contractor Report. 1973, 97 p.
• [37] Dwyer, D. J. (1987). Reliability test planning for one-shot systems. Proceedings of the Annual Reliability and Maintainability Symposium, 412-415.
• [38] Birolini, A. (2004). Reliability Engineering – Theory and Practice. New York, Springer-Verlag Berlin Heidelberg.
• [39] DEF STAN 00-42 (Part1)/Issue 1: Reliability and Maintainability Assurance Guides. Part 1: One-shot Devices/Systems, Glasgow, UK Ministry of Defence - Directorate of Standardization, 1997.
• [40] Beutner, E. (2007). Nonparametric inference for sequential k-out-of-n systems. Tokyo, The Institute of Statistical Mathematics.
• [41] Cramer, E. & Kamps, U. (1996). Sequential Order Statistics and k-out-of-n Systems with Sequentially Adjusted Failure Rates. Journal of Statistical Mathematics, Vol. 48, No. 3, 536-549.
• [42] IEC 60050-191, International Electrotechnical Vocabulary (IEV) – Chapter 191: Dependability and quality of service.
• [43] Blischke, W. R. & Murthy, D. N. P. (2000). Reliability Modeling, Prediction and Optimization, New York, Reliability Modeling, Prediction and Optimization, New York, John Wiley & Sons.
• [44] Dodson, B. & Nolan, D. (1999). Reliability Engineering Handbook. New York, Marcel Dekker.
• [45] Ebeling, C. E. (1997). An introduction to Reliability and Maintainability Engineering. New York, McGraw-Hill.
• [46] Pham, H. (2003). Handbook of Reliability Engineering. London, Springer-Verlag.
• [47] Koucky, M. & Valis, D. (2007). Reliability of Sequential System with Restricted Number of Renewals. Risk, Reliability and Social Safety. London: Taylor & Francis, 1845-1849.
• [48] Valis, D. (2007). Reliability of complex systems with one shot items. Proceedings of the 1st Summer Safety & Reliability Seminars 2007. 347-354. ISBN 978 83 25436 4 0.
• [49] Valis, D. & Vintr, Z. (2006), Dependability of Mechatronics Systems in Military Vehicle Design. Proceedings of the European Safety and Reliability Conference ESREL 2006. 1703-1707, ISBN 10 0415 41620 5.
• [50] Vintr, Z. & Valis, D. (2007) Reliability of Automatic Weapons Actuated by Powder Gases. Proceedings of the Seventh International Conference on Reliability, Maintainability and Safety. 563-567. ISBN 978 7 80144 682 4.