The assessment of quality of products using selected quality instruments

• Autorzy: Kardas E.
• Języki publikacji: EN

Abstrakty

EN

The quality parameters of products should be controlled at every stage of the production process, since it allows detection of any problems even in the initial stages of production processes and removes their causes during manufacturing. Final control of products is intended to capture non-conforming products that did not go to the customers. The results of such controls should constantly be analysed. Such analysis can help to detect the most common problems, determine some dependences or identify the causes of such situations. A lot of different instruments that can support improvement of processes can be used for this kind of analysis. The paper presents the possibility of using some tools which can be utilized to support the analysis and assessment of quality of products at different stages of the production process. The quality analysis of exemplary products using selected quality methods and tolls is carried out. Metal sleeve, that is part of electronic control subassembly of anti-blocking system of ABS, which was the research component being studied.

Słowa kluczowe

EN

quality; quality assessment; methods of quality managements; quality instruments; metal sleeve

PL

jakość; ocena jakości; metody zarządzania jakością; instrumenty zarządzania jakością; metalowa tuleja

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2016
• Tom: Vol. 10, No. 1
• Strony: 5--8
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Kardas E.

• Czestochowa University of Technology, Faculty of Materials Processing Technology And Applied Physics, Ul. Dabrowskiego 69, 42-201 Czestochowa, Poland, ([phone]

Bibliografia

• 1. Toruński J. 2012. Quality management in the automotive industry, Scientific papers of the University of Natural Science and Humanities in Siedlce, Series: Administration and management, No 92/, pp. 23 – 32.
• 2. Hamrol A., Mantura W. 2009. Quality analysis.Theory and practice, PWN, Warsaw.
• 3. Borkowski S., Ingaldi M., Jagusiak-Kocik M. 2014. Quality analysis and technological portfolio in production of the metal screws, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings, pp. 1716-1722.
• 4. Ingaldi M. 2014. Analysis of the quality problems during production process of the stud frame of the stretching station, Production Engineering Archives, Vol. 2, No. 1, pp. 2-5.
• 5. Sygut P. 2015. Evaluation of paving stone production quality, Production Engineering Archives, Vol. 6, No. 1, pp 14-16.
• 6. Information Materials Company X.
• 7. Kozień A. 2011. The analysis of the effectiveness of the quality management system in the selected production company, Engineering work under the direction of Edyta Kardas, Czestochowa University of Technology, Czestochowa.
• 8. Kardas E. 2013. The assessment of quality of braking system element using chosen quality tools, In: Estimation and Operating Improvement, S. Borkowski, M. Krynke (red), Faculty of Logistics, University of Maribor, Celje, pp. 85 – 94.
• 9. KardaS E. 2014. The assessment of quality of metal sleeve using selected quality tools, Metallurgy – Metal Engineering, 11/2014, pp. 788 –792.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.