Analysis of Thermal Stability of CrCN Coatings Deposited on Nitrided Substrates Using Modulated Temperature Thermodilatometry

• Autorzy: Mydłowska K. , Myśliński P. , Szparaga Ł. , Ratajski J. , Gilewicz A. , Jędrzejewski R.

Identyfikatory

DOI

10.1515/amm-2017-0115

• Języki publikacji: EN

Abstrakty

EN

The aim of the research was to investigate the influence of nitriding of the substrate made of 42CrMo4 steel on thermal stability of the antiwear CrCN coating deposited on its surface using Cathodic Arc Evaporation method. Samples of non-nitrided and nitrided substrate/CrCN coating systems were tested with Modulated Temperature Thermodilatometry, which program included system annealing in 26 h, temperature of 290°C and argon atmosphere. Recorded during tests, changes in substrate elongation in response for changes of sample temperature, enabled qualitative determination of changes in stress states in the coatings as a result of samples annealing. Annealing of the system with nitrided substrate resulted in smaller change in residual stress in coating than for the system with non-nitrided substrate, which can indicate its better thermal stability. Values of residual stresses in coatings calculated by sin²ψ method before and after annealing on the basis of tests performed using X-Ray diffraction, agree with results of dilatometric tests.

Słowa kluczowe

EN

antiwear coatings; nitriding; residual stress; thermal stability; thermodilatometry

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 771--776
• Opis fizyczny: Bibliogr. 33 poz., rys., tab., wzory

Twórcy

autor

Mydłowska K.

• Koszalin University of Technology, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Myśliński P.

• Koszalin University of Technology, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Szparaga Ł.

• Koszalin University of Technology, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Ratajski J.

• Koszalin University of Technology, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Gilewicz A.

• Koszalin University of Technology, 2 Śniadeckich Str., 75-453 Koszalin, Poland

autor

Jędrzejewski R.

• West Pomeranian University of Technology, 17 Piastów Av., 70-310 Szczecin, Poland

Bibliografia

• [1] L. Hultman, Vacuum 57, 1-30 (2000).
• [2] F. H. Lu, H.Y. Chen, Thin Solid Films 398-399, 368-373 (2001).
• [3] C. Fitz, A. Kolitsch, W. Fukarek, Thin Solid Films 389, 173-179 (2001).
• [4] M. Bielawski, D. Seo, Surf. Coat. Technol. 200, 1476-82 (2005).
• [5] L. Karlsson, L. Hultman, M.P. Johansson, A. Hörling, G. Ramanath, The influence of thermal annealing on residual stresses mechanical properties of arc-evaporation TiN and TiCxN1/x thin films. Proc. Thin Film Physics Division 162-189, Linköping University, Sweden (1999).
• [6] Ł. Szparaga, P. Myśliński, A. Gilewicz, J. Ratajski, Solid State Phenom. 223, 100-109 (2014).
• [7] R. Daniel, D. Holec, M. Bartosik, J. Keckes, C. Mitterer, Acta Mater. 59, 6631-6645 (2011).
• [8] X. Pang, K. Gao, F. Luo, H. Yang, L. Qiao, Y. Wang, A.A. Volinsky, Thin Solid Films 516, 4685-4689 (2008).
• [9] M. Bielawski, Surf. Coat. Technol. 200, 3987-3995 (2006).
• [10] C. Kirchlechner, K.J. Martinschitz, R. Daniel, C. Mitterer, J. Keckes, Thin Solid Films 517, 1167-1171 (2008).
• [11] J. Bonarski, J. Smolik, L. Tarkowski, M. Biel, Arch. Metall. Mater. 53, 49-55 (2008)
• [12] H.C. Barshilia, M. Surya Prakasha, A. Jainb, K.S. Rajama, Vacuum 77, 169-179 (2005).
• [13] P. Myśliński, Vacuum 83, 757-760 (2009).
• [14] A. Raveh, I. Zukerman, R. Shneck, R. Avni, I. Fried, Surf. Coat. Technol. 201, 6136-6142 (2007).
• [15] C. Mitterer, P.H. Mayrhofer, J. Musil, Vacuum 71, 279-284 (2003).
• [16] P. Wieciński, J. Smolik, H. Garbacz, K.J. Kurzydłowski, Solid State Phenom. 237, 47-53 (2015).
• [17] M. A. Djouadi, C. Nouveau, O. Banakh, R. Sanjines, F. Levy, G. Nouet, Surf. Coat. Technol. 151-152, 510-514 (2002).
• [18] H. C. Barshilia, K.S. Rajama, J. Mater. Res. 19, 3196-3205 (2004).
• [19] C. Héaua, R.Y. Fillitb, F. Vauxa, F. Pascarettia, Surf. Coat. Technol. 120-121, 200-205 (1999).
• [20] A. Gilewicz, R. Olik, L. Szparaga, J. Ratajski, Maintenance Problems 3, 27-43 (2014).
• [21] R. Rodríguez-Baracaldoa, J.A. Benitob, E.S. Puchi-Cabrerad, M.H. Staiad, Wear 262, 380-389 (2007).
• [22] P. Myśliński, Dylatometryczna metoda detekcji efektów termomechanicznych w systemach podłoże-powłoka PVD, Wydawnictwo Uczelniane Politechniki Koszalińskiej (2011).
• [23] D. M. Price, Thermochim. Acta 23, 357-358 (2000).
• [24] D .M. Price, J. Therm. Anal. Calorim. 64, 323-330 (2001).
• [25] P. Myśliński, P. Kamasa, A. Gilewicz, J. Phys. 564 (2014).
• [26] P. Myśliński, P. Kamasa, A. Wąsik, J. Therm. Anal. Calorim. 65, 553-559 (2001).
• [27] P. Myśliński, L. Szparaga, P. Kamasa, A. Gilewicz, J. Ratajski, J. Therm. Anal. Calorim. 120, 1609-1615 (2015).
• [28] Ł. Szparaga, P. Myśliński, A. Gilewicz, J. Ratajski, Solid State Phenom. 223, 100-109 (2014).
• [29] P. Myśliński, W. Precht, L. Kukiełka, P. Kamasa, K. Pietruszka, P. Małek, J. Therm. Anal. Calorim. 77, 253-258 (2004).
• [30] P. Myśliński, P. Kamasa, A. Gilewicz, J. Staśkiewicz, J. Therm. Anal. Calorim. 88, 737-740 (2007).
• [31] S. J. Skrzypek, A. Baczmanski, W. Ratuszek, E. Kusior, J. Appl. Crystallogr. 34, 427-435 (2001).
• [32] C. Kirchlechner, K.J. Martinschitz, R. Daniel, M. Klaus, C. Genzel, C. Mitterer, J. Keckes, Thin Solid Films 518, 2090-2096 (2010).
• [33] P. Myśliński, A. Gilewicz , R. Olik, Ł. Szparaga, K. Mydłowska, J. Ratajski, J. Therm. Anal. Calorim. 125 (3), 1273-1278 (2016)

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).