Vibrodiagnostic of welded thin-walled plates with the usage of laser sensors in network infrastructure

• Autorzy: Szeleziński A. , Muc A. , Murawski L.

Identyfikatory

DOI

10.5604/01.3001.0012.4818

• Języki publikacji: EN

Abstrakty

EN

The article presents a non-destructive welded joints assessment (vibrodiagnostics) method, in which, with the use of the Internet, computer networking technologies and laser displacement sensors, the quality of welded steel plates may be monitored. The article also describes the possibilities of analysis of received vibrodiagnostics data on the base of diagnostic parameters analysed in function of time and frequency. The method described in the article allows remotely registering, analysing and diagnosing mechanical systems using vibrodiagnostics and information technologies. Modern, computerized methods exhibit efficiency and reliability of results – they are currently the best measuring tools that can be used in automatic monitoring (structural health monitoring - SHM) of marine structures. It is essential to make objective assessment of the results by NDT users, which is tightly connected with the expertise of norms and regulations of NDT. It may be helpful in this respect to monitor responses from a few sensors, arranged in a few measuring points. NDT results quite often trigger further analysis of durability of an object. The NDT of welded joints method as presented in the article allows remotely and in an IT-aided way analysing and diagnosing mechanical systems with the use of vibrodiagnostics method.

Słowa kluczowe

EN

non-destructive testing; laser displacement sensor; NDT; vibrodiagnostics; Ethernet; LAN

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2018
• Tom: Vol. 25, No. 4
• Strony: 415--419
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Szeleziński A.

• Gdynia Maritime University Faculty of Marine Engineering Morska Street 83-87, 81-225 Gdynia, Poland tel.: [phone]

autor

Muc A.

• Gdynia Maritime University Faculty of Marine Engineering Morska Street 83-87, 81-225 Gdynia, Poland tel.: [phone]

autor

Murawski L.

• Gdynia Maritime University Faculty of Marine Engineering Morska Street 83-87, 81-225 Gdynia, Poland tel.: [phone]

Bibliografia

• [1] Krajewski, A., Hudycz, M., Zapewnienie jakości i kontrola złączy spajanych, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 2015.
• [2] Lewińska-Romicka, A., Badania nieniszczące. Podstawy defektoskopii, Wydawnictwa Naukowo-Techniczne, Warszawa 2001.
• [3] Czuchryj, J., Badania złączy spawanych wg norm europejskich, Wydawnictwo Biura Gamma, Warszawa 2003.
• [4] Deptuła, J., Mackiewicz, S., Szelążek, J., Problemy i techniki nieniszczących badań materiałów, Wydawnictwo Biura Gamma, Warszawa 2007.
• [5] Muc, A., Idzikowski, T., Szeleziński, A., Maj, M., System do zarządzania infrastrukturą komputerową uczelni wyższej wykorzystujący technologię Intel AMT, Zeszyty naukowe Wydziału Elektrotechniki i Automatyki PG, z .48, Gdansk 2016.
• [6] Szeleziński A., Muc, A., Murawski, L., Analysis concerning changes of structure damping n welded joints diagnostics, Journal of KONES Powertrain and Transport, Vol. 24, No. 4, Warsaw 2017.
• [7] Muc, A., Murawski, L., Szeleziński, A., Methods of cracks detection in marine structures’ welded joints based on signals’ time waveform analysis, Brodogradnja/Shipbilding, Vol. 69, No. 3, 2018.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).