Unconventional building forms roofed with innovative structures arranged on regular surfaces with the negative Gaussian curvature

• Autorzy: Chrzanowska Katarzyna , Abramczyk Jacek

Identyfikatory

DOI

10.35784/bud-arch.3325

• Języki publikacji: EN

Abstrakty

EN

A novel method for shaping innovative building forms, roofed with diversified complex continuous and discontinuous folded structures composed of many transformed corrugated shell units, is presented in the paper. The units are defined on the basis of specific reference polyhedral networks and arranged on arbitrary reference surfaces characterized by the negative Gaussian curvature. The method is presented using several computer models of complex building structures with folded plane-walled elevations. The proposed method significantly supplements the previous method developed for modelling building free forms, roofed with shell structures arranged in conformity with surfaces having the positive Gaussian curvature. Some basic rules using parameterization and governing the creation of the multi-plane elevations, ribbed continuous and discontinuous roof shell structures, arranged in different unconventional and visually attractive patterns, were developed. The elaborated specific sets of division coefficients are taken as parameters for the designed building structures. These sets determine unconventional polyhedral networks, which are composed of several specific sets that allow to define a polygonal eaves network, a reference surface and, finally, individual shell units of the roof structures. The developed method is presented using the example of three novel forms defined by means of the appropriately selected diversified sets of values of the division coefficients. The elaborated new forms confirm the innovative nature of the achieved results. By imposing appropriate proportions between the values of these division coefficients, the developed method enables the creation of two different groups continuous and discontinuous complex shell roof structures.

Słowa kluczowe

EN

novel building form; complex shell roof; parametric modelling; nominally flat thin-walled folded sheeting; multi-plane elevation

• Wydawca: Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Budownictwo i Architektura
• Rocznik: 2023
• Tom: Vol. 22, no 3
• Strony: 5--25
• Opis fizyczny: Bibliogr. 23 poz., fig., tab.

Twórcy

autor

Chrzanowska Katarzyna

• Department of Architectural Design and Engineering Graphics; Faculty of Civil Engineering Environment and Architecture; Rzeszow University of Technology

• https://orcid.org/0000-0002-6873-6984

autor

Abramczyk Jacek

• Department of Architectural Design and Engineering Graphics; Faculty of Civil Engineering Environment and Architecture; Rzeszow University of Technology

Bibliografia

• 1. Abramczyk J., Shell Free Forms of Buildings Roofed with Transformed Corrugated Sheeting, Monograph, Publishing House of Rzeszow University of Technology, Rzeszów, 2017. Google Scholar
• 2. Wei-Wen Yu, P.E., Cold Formed Steel Design; John Wiley and Sons Inc., New York, NY, 2000. Google Scholar
• 3. Reichhart A., "Corrugated Deformed Steel Sheets as Material for Shells", in Proceedings - Int. Conf. Lightweight Struct. Civ. Eng., Warsaw, 1995, pp. 625–636. Google Scholar
• 4. Abramczyk J., "Folded Sheets as a Universal Material for Shaping Transformed Shell Roofs", in Materials 2021, 14(8), 2051. https://doi.org/10.3390/ma14082051DOI: https://doi.org/10.3390/ma14082051 Google Scholar
• 5. Reichhart A., "Principles of designing shells of profiled steel sheets", in Proceedings - the X International Conference on Lightweight Structures in Civil Engineering, Rzeszow, 2004, pp. 138-145. Google Scholar
• 6. Abramczyk J., "Shape transformations of folded sheets providing shell free forms for roofing", in Proceedings - the 11th Conference on Shell Structures Theory and Applications, Gdańsk, Wojciech Pietraszkiewicz, Wojciech Witkowski, CRC Press Taylor and Francis Group, 2017, pp. 409-412.DOI: https://doi.org/10.1201/9781315166605-93 Google Scholar
• 7. Reichhart A., Geometrical and Structural Shaping Building Shells Made up of Transformed Flat Folded Sheets; Publishing House of Rzeszow University of Technology, Rzeszów, 2002. (in Polish) Google Scholar
• 8. Abramczyk J., "Transformed Corrugated Shell Units Used as a Material Determining Unconventional Forms of Complex Building Structures", in Materials 2021, 14(9), 2402. https://doi.org/10.3390/ma14092402 DOI: https://doi.org/10.3390/ma14092402 Google Scholar
• 9. Winter G., "Strength of thin steel compression flanges", in Trans. ASCE 1974, 112, 895–912 Google Scholar
• 10. Parker J.E., Behavior of Light Gauge Steel Hyperbolic Paraboloid Shells, Ph.D. Thesis, Cornell University. Ithaca, NY, 1969. Google Scholar
• 11. Gergely P., Banavalkar P.V. and Parker J.E., "The analysis and behavior of thin-steel hyperbolic paraboloid shells", in A Research Project Sponsored by the America Iron and Steel Institute, Report No. 338, Dept. of Struct. Engng., 1971, Cornell University: Ithaca, New York, NY, 1971. Google Scholar
• 12. Egger H., Fischer M. and Resinger F., "Hyperschale aus Profilblechen", Stahlbau 1971, 12, pp. 353–361. Google Scholar
• 13. Davis J.M. and Bryan E.R., "Manual of Stressed Skin Diaphragm Design", Granada Publishing Ltd., London, UK, 1982. Google Scholar
• 14. Abdel S.G., "Critical shear loading of curved panels of corrugated sheets.", in Proc. ASCE J. Struct. Div. 1970, 96, pp. 1279–1294.DOI: https://doi.org/10.1061/JMCEA3.0001326 Google Scholar
• 15. Biswas M. and Iffland J.S.B., "Metal decks used to form hypar-shell panels", in Proceedings of the 2nd Speciality Conference on Cold-Formed Steel Structures, Rolla, MO, USA, 1973. Google Scholar
• 16. Abel J.F. and Mungan I., Fifty Years of Progress for Shell and Spatial Structures. Monograph by the International Association for Shell and Spatial Structures, Madrid, Spain, 2011. Google Scholar
• 17. Saitoh M., Recent Spatial Structures in Japan, in JASS: Madrid, Spain, 2001. Google Scholar
• 18. Walentyński R. and Cybulski R., "Stability analyses and experimental investigation of doubly corrugated steel arch panels", in ACEE, 5/4, 2012, pp. 79-82. Google Scholar
• 19. Prokopska A. and Abramczyk J., "Responsive Parametric Building Free Forms Determined by Their Elastically Transformed Steel Shell Roofs", Buildings, 2019, 9(2), 46. https://doi.org/10.3390/buildings9020046DOI: https://doi.org/10.3390/buildings9020046 Google Scholar
• 20. Carmo M.P., Differential Geometry of Curves and Surfaces, Prentice-Hall, Inc.: Englewood Cliffs, NJ, USA, 1976. Google Scholar
• 21. Pottmann,H., Asperi A., Kilian, A. and Hofer M., Architectural Geometry, Bentley, Institute Press, USA, 2007. Google Scholar
• 22. Samyn P.P., "Structures isobarres et isonoeuds", in Proceedings - the 2nd International Conference on Space Structures – University of Surrey, Guilford, England, 1975, pp. 621-634. Google Scholar
• 23. Żwirek P., "Selected issues of using nominally flat folded sheets and self-bearing panels for curved" in Proceedings - the 9th Scientific and Technical Conference on Shaping Structures - Thin-walled structures, Rzeszów, Poland, 2015. (In Polish) Google Scholar