Excavation process control with using modern methods in the case of giant machines

• Autorzy: Onderková I. , Cholevová I.
• Języki publikacji: EN

Abstrakty

EN

For disintegration process control we need a quantity that respects objectively rock-disintegrating tool interaction with the elimination of human factor. From this, basic requirements for the evaluation quantity given below follow: is available in advance or at the moment of disintegration; minimises the influence of human factor on the resultant effect; evaluates objectively the disintegration process. A measure of efficiency of any disintegration process is the consumption of energy usually related to the unit volume of disintegrated rock; on the basis of analysis done theoretical and practical researches orientated towards the disintegration processes and the verification of objectivity when used in situ (in drilling and tunnelling), at present it is minimised specific volume energy that is the most objective evaluation quantity. This quantity has a general validity for dispersion processes, and thus its use even for the evaluation of diggability on the digging wheel of excavator has a rational basis. In connection with the GIS application for controlling the extracted quantity, an optimal tool is offered for the maximum efficiency of excavation process.

Słowa kluczowe

EN

energy; excavator; force; GPS; resistances; wheel

• Wydawca: Wydawnictwo Naukowe Akademii Morskiej w Szczecinie
• Czasopismo: Zeszyty Naukowe / Akademia Morska w Szczecinie
• Rocznik: 2014
• Tom: nr 37 (109)
• Strony: 72--76
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Onderková I.

• VŠB – Technical University of Ostrava 708 33 Ostrava – Poruba, 17. Listopadu, Czech Republic

autor

Cholevová I.

• VŠB – Technical University of Ostrava 708 33 Ostrava – Poruba, 17. Listopadu, Czech Republic

Bibliografia

• 1. JURMAN J.: Hodnocení efektivnosti dobývacího procesu kolesových rypadel s využitím vrtného monitoringu. Habilitační práce. VŠB-TU, Ostrava 1997.
• 2. ČSN 27 7013. Stroje pro povrchovou těžbu – Kolesová rýpadla a nakladače. Termíny a definice. 1992.
• 3. JURMAN J.: Kritický pohled na hodnocení rypných odporů. Technicko-ekonomický zpravodaj Hnědé uhlí, 5, 1987, 21–27.
• 4. JURMAN J.: Rypné odpory jako kritérium rozpojitelnosti při povrchovém dobývání. Uhlí, 5, 1988, 222–226.