Analysis and testing of the dimensional accuracy of parts made with the FDM technology

• Autorzy: Kalinowski K. , Grabowik C. , Janik W.
• Języki publikacji: EN

Abstrakty

EN

In this paper the methodology applied during the analysis and testing processes of the dimensional accuracy of parts made with FDM technology is shown. The manufactured parts were made on the basis of the technical documentation delivered by the ordering company. The main purpose of the conducted research was to check the differences between chosen dimensions of original parts made with injection moulding and those made with FDM technology. The short characteristic of the applied manufacturing technology and the research methodology were also presented in the paper.

Słowa kluczowe

EN

FDM; rapid prototyping; dimensional analysis

PL

FDM; szybkie prototypowanie; analiza wymiarowa

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Selected Engineering Problems
• Rocznik: 2013
• Tom: nr 4
• Strony: 103--108
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Kalinowski K.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

autor

Grabowik C.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

autor

Janik W.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland

Bibliografia

• 1. www.stratasys.com
• 2. Grabowik C., Janik W.: The concrete casting matrixes inserts design preparation based on the master models, Advanced Materials Research, Advanced Material Science and Mechanics, 2013 vol. 702, p. 259-262.
• 3. Grabowik C., Kalinowski K.: Object-oriented models in an integration of CAD/CAPP/CAP systems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6679 LNAI (PART 2), (2011) p. 405-412.
• 4. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation. Selected Engineering Problems, vol. 3 (2012), p. 87–92.
• 5. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation – a vacuum casting practical example. Selected engineering problems, vol. 3 (2012), p. 81–86.
• 6. Guide to Expression of Uncertainty in Measurement, ISO 1995, Switzerland.
• 7. Durczak K.: Estimating the uncertainty of analog and digital measurement instruments (in Polish). Journal of Research and Applications in Agricultural Engineering”, Vol. 51(4), 2006.