The model of a temporary temperature field during multi-pass arc weld surfacing. Pt. 2, Example of computations

• Autorzy: Winczek J. , Rygał G. , Skrzypczak T.

Identyfikatory

DOI

10.17512/jamcm.2015.3.15

• Języki publikacji: EN

Abstrakty

EN

In this work computations of a temperature field are carried out during multipass Gas Metal Arc Weld surfacing of a cuboidal steel element taking into account heat of the melted electrode material. The results are presented in the form of temporary and maximum temperature distribution in the element’s cross-section and thermal cycles at selected points.

Słowa kluczowe

EN

temperature field; Gas Metal Arc Weld surfacing; modelling

PL

pole temperatury; modelowanie

• Wydawca: Wydawnictwo Politechniki Częstochowskiej
• Czasopismo: Journal of Applied Mathematics and Computational Mechanics
• Rocznik: 2015
• Tom: Vol. 14, nr 3
• Strony: 141--148
• Opis fizyczny: Bibliogr. 4 poz., rys., tab.

Twórcy

autor

Winczek J.

• Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology Czestochowa, Poland

autor

Rygał G.

• Pedagogical Faculty, Jan Dlugosz University in Czestochowa, Poland

autor

Skrzypczak T.

• Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology Czestochowa, Poland

Bibliografia

• [1] Winczek J., Temperature field in surfaced steel casts with the heat of the weld taken into account, Archiv. Foundry Eng. 2014, 14, Spec. Is. 1/2014, 121-126.
• [2] Winczek J., Rygał G., Skrzypczak T., The model of temporary temperature field during multipass arc weld surfacing, Part I: Analytical description, Journal of Aplied Mathematics and Computational Mechanics 2015, 14(2), 123-130.
• [3] Klimpel A., Balcer M., Klimpel A.S., Rzeźnikiewicz A., The effect of the method and parameters in the GMA surfacing with solid wires on the quality of pudding welds and the content of the base material in the overlay, Welding Int. 2006, 20, 845-850.
• [4] Hrabe P., Choteborsky R., Navratilova M., Influence of welding parameters on geometry of weld deposit bead, Int. Conf. Economic Eng. Manuf. Systems, Brasov, 26-27 November 2009, Regent, 10 (2009) 3(27) 291-294.