Some guidance in the designing of a roller for the automotive testers

• Autorzy: Angelov Y. , Draganov I.

Identyfikatory

DOI

10.20858/tp.2018.13.3.9

• Języki publikacji: EN

Abstrakty

EN

This work presents some aspects related to the designing of a roller for stands that are intended to determine the parameters of the transmission of a vehicle, such as braking force, wheel revolutions, etc. The computational scheme of simply supported beam is used to create an analytical mechanical-mathematical model through which a multicriteria optimization problem has been solved. A finite element macro and submodel of the roller has been created, and by using the R1MS technique, the fatigue strength in the welding seams in the roller has also been determined. A parametric analysis is accomplished to determine the influence of the thickness of the base steel and the covering ebonite layer on the perimeter change of the outer surface, taking into account the physical non-linearity of the outer layer.

Słowa kluczowe

EN

automotive brake tester; roller; optimisation; PSI-method; finite element analysis; R1MS

PL

motoryzacyjny próbnik hamowania; wałek; optymalizacja; metoda PSI; analiza elementów skończonych; R1MS

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Transport Problems
• Rocznik: 2018
• Tom: T. 13, z. 3
• Strony: 97--108
• Opis fizyczny: Bibliogr. 27 poz.

Twórcy

autor

Angelov Y.

• University of Ruse, 8 Studentska str., 7017, Ruse, Bulgaria

autor

Draganov I.

• University of Ruse, 8 Studentska str., 7017, Ruse, Bulgaria

Bibliografia

• 1. Directive 2009/40/EC of the European Parliament and of the Council of 6 May 2009 on roadworthiness tests for motor vehicles and their trailers.
• 2. ISO 21069-1:2004. Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3.5 t using a roller brake tester - Part 1: Pneumatic braking systems. International Organization for Standardization.
• 3. ISO 21995:2008. Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3.5 t - Acquisition and use of reference values using a roller brake tester. International Organization for Standardization.
• 4. Directive 2004/22/EC of the European Parliament and of the Council of 31 March 2004 on measuring instruments.
• 5. EN 50148:2001. Електронни таксиметрови апарати. София: Български институт за стандартизация. [In Bulgarian: Electronic taximeters. Sofia: Bulgarian Institute of Standardization].
• 6. Сестримски, Д. Диагностика на автомобила. София: Техника. 1989. 235 p. [In Bulgarian: Sestrimski, D. Diagnostics of the car. Sofia: Tehnica].
• 7. Trzeciak, K. Diagnostyka samochodow osobowych. Warszawa: WKL. 2005. 352 p. [In Polish: Trzeciak, K. Diagnosis of passenger cars. Warsaw, WKL].
• 8. Senabre, C. & Velasco, E. & Valero, S. Analysis of the influence on tire pressure and weight on the measure of braking-slide on a brake tester and on flat ground. Securitas Vialis 2. 2010. P. 109-116.
• 9. Senabre, C. & Velasco, E. & Valero, S. Comparative Analysis of Vehicle Brake Data in the Ministry of Transport Test on the Roller Brake Tester and on Flat Ground. International Journal of Automotive Technology. 2012. Vol. 13. No. 5. P. 735-742.
• 10. Pusa, A. Traceability of the calibration of test car for roll brake tester. In: 18th IMEKO TC3 Conference on Force. Mass and Torque, 2002. P. 298-305.
• 11. Pusa, A. & Leppӓlӓ, H. Investigation of the Measurement Capability of Roll Brake Tester by the Test Trail. In: XVII IMEKO World Congress. In: Dubrovnik, Croatia. 2003. P. 362-365.
• 12. Ramos, D. & Gauchia, A & Boada, B. & Diaz, V. New Procedure to Estimate the Brake Warping in a Roller Tester. International Journal of Automotive Technology. 2010. Vol. 11. No. 5. P. 691-699.
• 13. Ангелов, Б. Методологически основи на функционално-структурния анализ и проектирането на технически системи. Русе. 2014. 128 p. [In Bulgarian: Angelov, B. Methodological foundations of functional-structural analysis and design of technical systems. Ruse].
• 14. Стойчев, Ю. & Куюмджиев, Х. & Николов, Й. & Василева, M. Съпротивление на материалите. Русе: ВТУ "Ангел Кънчев". 1986. 422 p. [In Bulgarian: Stojchev, Y. & all. Strength of materials. Ruse].
• 15. Иванов, И. Механика на материалите и конструкциите. Русе. 2014. 373 p. [In Bulgarian: Ivanov, I. Mechanics of materials and structures. Ruse].
• 16. Salukvadze, M. An Approach to the Solution on the Vector Optimization Problem of Dynamic Systems. Journal of Theory and Applications. 1982. Vol. 38. No. 3. P. 409-422.
• 17. Чешанков, Б. & Витлиемов, В. & Коев, П. Многокритериален параметричен синтез на механични системи: I. Оптимизационен подход. Механика на машините. 2000. Vol. 8 (32). No. 4. P. 97-102. [In Bulgarian: Cheshankov, B. & et al. Multi-criterial parametric synthesis of mechanical systems I. Optimization approach. Mechanics of machines].
• 18. Иванов, И. Компютърно моделиране на непрекъснати среди. Русе: Русенски университет. 2004. 117 p. [In Bulgarian: Ivanov, I. Computer modeling of continuum. Ruse]. 19. Radaj, D. Gestaltung und Berechnung von Schweißkonstruktionen, Ermüdungsfestigkeit. PhD thesis. Düsseldorf, Germany: DVS. 1985. [In German: Radaj, D. Design and calculation of welding structures, fatigue strength. PhD thesis. Dusseldorf, Germany: DVS].
• 20. Hirai, I. & Wang, B. & Pilkey, W. An efficient zooming method for finite element analysis. International Journal for Numerical Methods in Engineering. 1984. Vol. 20. No. 9. P. 1671-1683.
• 21. Davies, B. The Stress-Strain Relationship in Ebonite. Transactions of the Institution of the Rubber Industry. 1933. Vol. 9. No. 2. P. 130-140.
• 22. Davies, P. & Blackman, B. & Brunner, A. Standard test methods for delamination resistance of composite materials: current status. Applied Composite Materials. 1998. Vol. 5. No. 6. P. 345-364.
• 23. Rizov V. Non-linear delamination fracture analysis by using power-law hardening. Multidiscipline Modeling in Materials and Structures. 2016. Vol. 12. No. 1. P. 80-92.
• 24. Тончев, Й. MATLAB 7 Част III. Преобразувания. Изчисления. Визуализация. София: "Техника". 2009. 220 p. [In Bulgarian: Tonchev, I. MATLAB 7 Part III. Transformations. Calculations. Visualization. Sofia].
• 25. ABAQUS. Analysis User's Manual. ver. 6.12, USA: Dassault Systemes Simulia Corp.
• 26. Иванов, Р. & Аврамов, Е. & Русев, Р. Влияние на някои фактори върху контактното петно на пневматична гума. Научни трудове на Русенски университет. 2011. Vol. 50. Ser. 4.
• P. 65-70. [In Bulgarian: Ivanov, R. & all. Influence of some factors on the contact spot of the tire. Proceedings -University of Ruse].
• 27. Желев, А. & Костадинов, Й. Заварени конструкции. Том II. Якостни оценки. София: Държавно издателство „Техника”. 1984. 203 p. [In Bulgarian: Gelev, A. & all. Welded structures II. Strength assessments. Sofia].