PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effect of NaOH Molar Concentration on Microstructure and Compressive Strength of Dolomite/Fly Ash-Based Geopolymers

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Dolomite can be used as a source of aluminosilicate to produce geopolymers; however, this approach is limited by its low reactivity. This study analyzes the viability of producing geopolymers using dolomite/fly-ash with sodium silicate and NaOH solutions (at multiple concentrations) by determining the resultant geopolymers’ compressive strengths. The dolomite/fly-ash-based geopolymers at a NaOH concentration of ~22 M resulted in an optimum compressive strength of 46.38 MPa after being cured for 28 days, and the SEM and FTIR analyses confirmed the denser surface of the geopolymer matrix. The synchrotron micro-XRF analyses confirmed that the Ca concentration exceeded that of Si and Mg, leading to the formation of calcium silicate hydrate, which strengthens the resulting geopolymers.
Twórcy
  • Universiti Malaysia Perlis (Unimap), Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Perlis, Malaysia
  • Universiti Malaysia Perlis (Unimap), Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Perlis, Malaysia
  • Universiti Malaysia Perlis (Unimap), Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Perlis, Malaysia
  • Universiti Malaysia Perlis (Unimap), Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Perlis, Malaysia
  • Universiti Malaysia Perlis (Unimap), Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Perlis, Malaysia
  • Synchrotron Light Research Institute (SLRI), 111 University Avenue, Muang District, Nakhon Ratchasima 30000, Thailand
  • ”Gheorghe Asachi” Technical University, Faculty of Materials Science and Engineering, Blvd. D. Mangeron 71, 700050 Lasi, Romania
  • National Metal and Materials Technology Center (MTEC), 114 Thailand Science Park, Phaholyothin Road, Klong 1, Klongluang, Pathumthani 12120, Thailand
  • Czestochowa University of Technology, Department of Physics, 42-200, Czestochowa, Poland
  • Czestochowa University of Technology, Department of Physics, 42-200, Czestochowa, Poland
Bibliografia
  • [1] P.A. Duxson, J.L. Fernández-Jiménez, G.C. Provis, A. Lukey, A. Palomo, J.S.J. van Deventer, J. Mater. Sci. 42 (9), 2917-2933 (2007).
  • [2] J.R. Chennur, S. Elavenil, Mater. Res. Express, (2019).
  • [3] I.H. Aziz, M.M.A.B. Abdullah, C.-Y. Heah, Y.-M. Liew, Adv. Cem. Res., 1-11 (2019).
  • [4] P.K. Sarker, S. Kelly, Z. Yao, Mater. Des. 63, 584-592 (2014).
  • [5] L. Zeng, C. Dan-Yang, Y. Xu, F. Chun-Wei, P. Xiao-Qin, Appl. Clay. Sci. 101, 637-642 (2014).
  • [6] I.H. Aziz, M.M. Al Bakri Abdullah, H.C. Yong, L.Y. Ming, K. Hussin, A. Surleva, E.A. Azimi, Proc. Inst. Mecha. Eng. L.-J. Mater. 233 (4) 721-733 (2019).
  • [7] C.D. Atiş, E.B. Görür, O. Karahan,C. Bilim, S. İlkentapar, E. Luga, Constr. Build. Mater. 96, 673-678 (2015).
  • [8] S. Pangdaeng, V. Sata, P. Chindaprasirt, Int. J. Geomate. 14 (46), 121-128 (2018).
  • [9] R.M. Hamidi, Z. Man, K.A. Azizli, Procedia Eng. 148, 189-193 (2016).
  • [10] K. El Hafid, M. Hajjaji, H. El Hafid, J. Build. Eng. 11, 158-165 (2017).
  • [11] Y. Zarina, H. Kamarudin, A.M.M. Al Bakri, I. Khairul Nizar, A.R. Rafiza, Influence of Dolomite on The Mechanical Properties of Boiler Ash Geopolymer Paste, 2014, Key Engineering Materials (2014).
  • [12] C.K. Yip, J.L. Provis, G.C. Lukey, J.S.J. van Deventer, Cem. Concr. Compos. 30 (10), 979-985 (2008).
  • [13] A.S. Ouda, M. Gharieb, J. Build. Eng. 27, 100919 (2020).
  • [14] E. Cohen, A. Peled, G. Bar-Nes, J. Clean. Prod. 235, 910-919 (2019).
  • [15] ASTM, A. Annual Book of ASTM Standards 4 (1), 1-9 (2013).
  • [16] K. Janssens, K. Proost, G. Falkenberg, Spectrochim Acta B. 59 (10-11), 1637-1645 (2004).
  • [17] V. Solé, E. Papillon, M. Cotte, P. Walter, J. Susini, Spectrochim Acta B. 62 (1), 63-68 (2007).
  • [18] K. Somna, C. Jaturapitakkul, P. Kajitvichyanukul, P. Chindaprasirt, Fuel. 90 (6), 2118-2124 (2011).
  • [19] S. Hanjitsuwan, S. Hunpratub, P. Thongbai, S. Maensiri, V. Sata, P. Chindaprasirt, Cem. Concr. Compos. 45, 9-14 (2014).
  • [20] I.H Aziz,. M.M. Al Bakri Abdullah, H.C. Yong, L.Y. Ming, K. Hussin, A. Surleva, E.A. Azimi, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233 (4), 721-733 (2019).
  • [21] P.N. Lemougna, K.-t. Wang, Q. Tang, E. Kamseu, N. Billong, U.C. Melo, X.-M. Cui, Appl. Clay. Sci. 148, 109-117 (2017).
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d0475945-d13b-48e8-9b61-9e9d7491c5f0
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.