PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Kinetic Studies of Pt(IV) Chloride Complex Ions Reduction Reaction Using Potassium Formate

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper, the kinetics of the platinum(IV) chloride complex ions reduction reaction was studied. It was shown that the mechanism exhibits autocatalytic character. The presence of metallic platinum in the system significantly increases the reaction rate. The influence of the initial concentration of precursor, reductant, ionic strength, initial concentration of the chloride ions as well as the temperature on the process rate was investigated. The activation energy was determined and is equal to 93.57 kJ/mol. Moreover, the obtained metallic phase was analyzed, and it was observed that it has a micrometric size.
Słowa kluczowe
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Mickiewicza Ave. 30, 30-059 Kraków. Poland
  • AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Mickiewicza Ave. 30, 30-059 Kraków. Poland
autor
  • MTA-SZTE Biomimetic Systems Research Group, University of Szeged, H-6720 Dóm Tér 8, Szeged, Hungary
  • University of Szeged, Interdisciplinary Excellence Centre, Department of Physical Chemistry and Materials Science, H-6720, Rerrich B. Tér 1, Szeged, Hungary
Bibliografia
  • [1] M. H. H. Mahmoud, JOM 55, 37-40 (2003).
  • [2] H. Renner , G. Schlamp, I. Kleinwächter, E. Drost, H. M. Lüschow, P. Tews, P. Panster, M. Diehl, J. Lang, T. Kreuzer, A. Knödler, K. A. Starz, K. Dermann, J. Rothaut, R. Drieselmann, C. Peter, R. Schiele, Platinum Group Metals and Compounds, in: Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA, 2000.
  • [3] J. H. Potgieter, S. S. Potgieter, R. K. K. Mbaya, A. Teodorovic, J. S. Afr. Inst. Min. Metall. 104, 563-571 (2004).
  • [4] J. Chen, K. Huang, Hydrometallurgy 82, 164-171 (2006).
  • [5] M. K. Jha, J. C. Lee, M. S. Kim, J. Jeong, B. S. Kim, V. Kumar, Hydrometallurgy 133, 23-32 (2013).
  • [6] KGHM Polska Miedź SA, Monograph, ed. A. Piestrzyński, KGHM Cuprum Sp. z o.o., KGHM Polska Miedź SA, Lubin 1996.
  • [7] H. Dong, J. Zhao, J. Chen, Y. Wu, B. Li, International Journal of Mineral Processing 145, 108-113 (2015).
  • [8] M. Wojnicki, K. Pacławski, R. P. Socha, K. Fitzner, Trans. Nonferrous Met. Soc. China 23, 1147-1156 (2013).
  • [9] M. Wojnicki, E. Rudnik, R. P. Socha, K. Fitzner, Australian Journal of Chemistry 70, 769-775 (2017).
  • [10] M. Wojnicki, R. P. Socha, M. Luty-Błocho, K. Fitzner, Reaction Kinetics, Mechanisms and Catalysis 120, 715-734 (2017).
  • [11] M. Luty-Błocho, M. Wojnicki, Journal of Flow Chemistry 5, 197-200 (2015).
  • [12] K. Lemma, D. A. House, N. Retta, L. I. Elding, Inorganica Chimica Acta 331, 98-108 (2002).
  • [13] M. Luty-Błocho, M. Wojnicki, K. Pacławski, K. Fitzner, Chemical Engineering Journal 226, 46-51 (2013).
  • [14] P. Kim, J.B. Joo, W. Kim, J. Kim, I. K. Song, J. Yi, Journal of Power Sources 160, 987-990 (2006).
  • [15] V.V. Patrushev, Hydrometallurgy 50, 89-101 (1998).
  • [16] A. Miyazaki, I. Balint, Y. Nakano, Journal of Nanoparticle Research 5, 69-80 (2003).
  • [17] M. Wojnicki, P. Kwolek, Journal of Photochemistry and Photobiology A: Chemistry 314, 133-142 (2016).
  • [18] M. Azaroual, B. Romand, P. Freyssinet, J.-R. Disnar, Geochimica et Cosmochimica Acta 65, 4453-4466 (2001).
  • [19] C. H. Gammons, Geochimica et Cosmochimica Acta 59, 1655-1667 (1995).
  • [20] M. Wojnicki, A. Podborska, Archives of Metallurgy and Materials 62, 737-745 (2017).
Uwagi
EN
1. This work was supported by the European Grant No. POIG.01.01.02.-00-015/09-00.
PL
2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d00ffe79-e376-431f-aa87-38c9b6ec4215
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.