PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Direct Comparison of Analogue and Digital FGPA-Based Approaches to Synchronous Detection

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper deals with a comparison between digital and analogue implementation of a synchronous detection algorithm. The commonly used implementation methods of synchronous detection are presented in the paper. The paper describes FPGA-based digital and analogue hardware approaches, focusing on the digital design. The characteristics of used analogue-to-digital converters are measured. Both proposed approaches are directly compared in terms of sensitivity and long-term stability. The achieved results, along with identified limitations and proposed improvements are widely discussed.
Rocznik
Strony
57--69
Opis fizyczny
Bibliogr. 21 poz., rys., tab., wykr., wzory
Twórcy
autor
  • Czech Technical University in Prague, Faculty of Electrical Engineering, Technicka 2, 166 27 Prague 6, Czech Republic
autor
  • Czech Technical University in Prague, Faculty of Electrical Engineering, Technicka 2, 166 27 Prague 6, Czech Republic
autor
  • Czech Technical University in Prague, Faculty of Electrical Engineering, Technicka 2, 166 27 Prague 6, Czech Republic
Bibliografia
  • [1] Analog Devices. Appl. Notes MS-2698, Use Synchronous Detection to Make Precision, Low Level Measurements. (2014).
  • [2] Ripka, P., Tipek, A. (2007). Modern Sensors Handbook (Instrumentation and Measurement). Wiley-ISTE.
  • [3] Dai, D., He, Q. (2012). Multiscale noise tuning stochastic resonance enhances weak signal detection in a circuitry system Measurement Science and Technology, 23(11), 115001.
  • [4] Koukourlis, C.S., Trigonidis, V.K., Sahalos, J.N. (1993). Differential synchronous demodulation for small signal amplitude estimation. IEEE Transactions on Instrumentation and Measurement, 42(5), 926-931.
  • [5] Alonso, R., Villuendas, F., Borja, J., Barragn, L.A., Salinas, I. (2003). Low-cost, digital lock-in module with external reference for coating glass transmission/reflection spectrophotometer. Measurement Science and Technology, 14(5), 551.
  • [6] Svatos, J., Vedral, J. (2012). The usage of frequency swept signals for metal detection. IEEE Transactions on Magnetics, 48(4), 1501-1504
  • [7] Hofmann, M., Bierl, R., Rueck, T. (2012). Implementation of a dual-phase lock-in amplifier on a tms320c5515 digital signal processor. 2012 5th European DSP Education and Research Conference (EDERC), 20-24.
  • [8] Das, A., Yaswanth, T. (2015). A low-cost, portable alternative for a digital lock-in amplifier using tms320c5535 dsp. 2015 Annual IEEE India Conference (INDICON), 1-4.
  • [9] Sonnaillon, M.O., Urteaga, R., Bonetto, F.J., Ordonez, M. (2005). Implementation of a high frequency digital lock-in amplifier. Canadian Conference on Electrical and Computer Engineering, , pp. 1229-1232
  • [10] Texas Instruments. (2016). ADS126x 32-Bit, Precision, 38-kSPS, Analog-to-Digital Converter (ADC) with Programmable Gain Amplifier (PGA) and Voltage Reference.
  • [11] Stanford Research Systems. (2013). Model DS360 Ultra Low Distortion Function Generator.
  • [12] Vedral, J. (2010). Adc testing with poly-harmonic signals. Mixed-Signals, Sensors and Systems Test Workshop (IMS3TW), 2010 IEEE 16th International, 1-4.
  • [13] Dobrev, D., Neycheva, T., Mudrov, N. (2008). Digital lock-in techniques for adaptive power-line interference extraction. Physiological Measurement, 29(7), 803.
  • [14] Altera. (2015). Arria V Device Handbook.
  • [15] Analog Devices. (2008). MT-085 TUTORIAL, Fundamentals of Direct Digital Synthesis (DDS).
  • [16] Kejun, J., Yangang, Z., Ying, L., Huiqin, W. (2010). Design and implementation dds based on fpga. Circuits. Communications and System (PACCS), 2010 Second Pacific-Asia Conference on, 2, 121-123.
  • [17] Yue, R., Ying, T., Wen-ji, Y., Zhang-quan, W., Sen, X. (2012). A single chip multi-functional dds waveform generator based on fpga with sopc design flow. Intelligent Control and Automation (WCICA), 2012 10th World Congress on, 4206-4210.
  • [18] Tomlain, J., Sedlacek, R., Vedral, J. (2015). Partial discharge diagnostic system for nondestructive testing of high-voltage machines. XXI IMEKO World Congress ”Measurement in Research and Industry”.
  • [19] Teren, O., Sedlacek, R., Vedral, J. (2015 Capacitance and dissipation factor meter for highvoltage electrical machines. XXI IMEKO World Congress ”Measurement in Research and Industry”.
  • [20] Analog Devices. (2013). 4.8 kHz Ultralow Noise 24-Bit Sigma-Delta ADC with PGA.
  • [21] Draxler, K., Styblikova, R. (2016). Calibration of ac clamp meters. IEEE Transactions on Instrumentation and Measurement, (99), 1-7.
Uwagi
EN
This work was financially supported by the Czech Technical University within the framework of project No. SGS15/213/OHK3/3T/13 “Non-destructive diagnostic methods of HV power transformers”.
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cf73f685-5b4a-4919-a856-f60f4c311695
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.