PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A parametric study of the mechanical behavior of nested multi tube structures under quasi-static loading

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Mechanical behavior of nested aluminum structures under lateral and quasi-static loadings has been investigated in current paper. These structures consist of two nested tubes in which the inner tube is located vertically in the horizontal outer tube. The research has been done numerically and experimentally. In the numerical section, the LS-DYNA software has been used while experimental results are implemented to validate the FE outcome. The well correlated numerical results show that increasing the diameter of the inner tube leads to a decrease in the maximum force and the specific energy absorption. Later, employing the optimization by response surface method in Minitab software, the energy absorber's characteristics has been optimized and introduced as new set of specifications. High crush force efficiency is the main criterion in current research.
Rocznik
Strony
943--957
Opis fizyczny
Bibliogr. 21 poz., rys., tab., wykr.
Twórcy
  • Department of Mechanical Engineering, Bu-Ali Sina University, Hamedan, Iran
autor
  • Department of Mechanical Engineering, Bu-Ali Sina University, Hamedan, Iran
  • Department of Engineering and Build Environment, Anglia Raskin University, Chelmsford, United Kingdom
Bibliografia
  • [1] S. Sharifi, M. Shakeri, H.E. Fakhari, M. Bodaghi, Experimental investigation of bitubal circular energy absorbers under quasi-static axial load, Thin-Walled Struct. 89 (2015) 42–53.
  • [2] A. Alavi Nia, H. Khodabakhsh, The effect of radial distance of concentric thin-walled tubes on their energy absorption capability under axial dynamic and quasi-static loading, Thin-Walled Struct. 93 (2015) 188–197.
  • [3] S. Chahardoli, A. Alavi Nia, Investigation of mechanical behavior of energy absorbers in expansion and folding modes under axial quasi-static loading in both experimental and numerical methods, Thin-Walled Struct. 120 (2017) 319–332.
  • [4] A. Alavi Nia, S. Chahardoli, Optimizing the layout of nested three-tube structures in quasi-static axial collapse, Thin- Walled Struct. 107 (2016) 169–181.
  • [5] J. Hu, G. Lu, H. Yang, T.X. Yu, J. Xu, Dynamic response of internally nested hemispherical shell system to impact loading, Thin-Walled Struct. 120 (2017) 29–37.
  • [6] P. Xu, J. Xing, S. Yao, C. Yang, K. Chen, B. Li, Energy distribution analysis and multi-objective optimization of a gradual energy-absorbing structure for subway vehicles, Thin-Walled Struct. 115 (2017) 255–263.
  • [7] M.S. Zahran, P. Xue, M.S. Esa, M.M. Abdelwahab, A novel tailor-made technique for enhancing the crashworthiness by multi-stage tubular square tubes, Thin-Walled Struct. 122 (2018) 64–82.
  • [8] T. Yella Reddy, S.R. Reid, Lateral compression of tubes and tube-systems with side constraints, Int. J. Mech. Sci. 21 (1979) 187–199.
  • [9] A.G. Olabi, E. Morris, M.S.J. Hashmi, M.D. Gilchrist, Optimised design of nested circular tube energy absorbers under lateral impact loading, Int. J. Mech. Sci. 50 (2008) 104–116.
  • [10] A. Baroutaji, E. Morris, A.G. Olabi, Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading, Thin-Walled Struct. 82 (2014) 262–277.
  • [11] A. Baroutaji, M.D. Gilchrist, D. Smyth, A.G. Olabi, Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading, Thin-Walled Struct. 86 (2015) 121–131.
  • [12] H. Wang, J. Yang, H. Liu, Y. Sun, T.X. Yu, Internally nested circular tube system subjected to lateral impact loading, Thin-Walled Struct. 91 (2015) 72–81.
  • [13] A. Niknejad, Pourya H. Orojloo, A novel nested system of tubes with special cross-section as the energy absorber, Thin- Walled Struct. 100 (2016) 113–123.
  • [14] A. Baroutaji, M.D. Gilchrist, A.G. Olabi, Quasi-static, impact and energy absorption of internally nested tubes subjected to lateral loading, Thin-Walled Struct. 98 (2016) 337–350.
  • [15] T. Tran, Crushing and theoretical analysis of multi-cell thin-walled triangular tubes under lateral loading, Thin-Walled Struct. 115 (2017) 205–214.
  • [16] T. Tran, A study on nested two-tube structures subjected to lateral crushing, Thin-Walled Struct. 129 (2018) 418–428.
  • [17] K. Yang, Y. Chen, S. Liu, C. Qiao, J. Yang, Internally nested self-locked tube system for energy absorption, Thin-Walled Struct. 119 (2017) 371–384.
  • [18] S.A. Elahi, J. Rouzegar, A. Niknejad, H. Assaee, Theoretical study of absorbed energy by empty and foam-filled composite tubes under lateral compression, Thin-Walled Struct. 114 (2017) 1–10.
  • [19] A.S.M.I.H. Committee, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 1990.
  • [20] A. International, ASTM E8/E8M-09 Standard Test Methods for Tension Testing of Metallic Materials, ASTM, 2009.
  • [21] R.S.G. Derringer, Simultaneous optimization of several response variables, J. Qual. Technol. 12 (1980) 214–219.
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cf305f08-1dcf-4e79-a0fc-67622cc30127
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.