The use of BIM to propose alternative construction methods to reduce the cost of energy for the historic archeological building in Iraq

• Autorzy: Abdullah Oday Hammody , Hatem Wadhah Amer

Identyfikatory

DOI

10.24425/ace.2023.145283

• Języki publikacji: EN

Abstrakty

EN

The building information modeling (BIM) method is one of the newest methods that has been widely used in many parts of the building business, including energy management. The aim of this research is to analyze the most holy theotokos in order to find the best set of modifications that result in an optimal energy cost. The analysis was conducted through the use of building information modeling (BIM) technology and the associated programmers such as Auto Desk Revit 2020 and Auto Desk Insight 360, in order to determine the optimal strategies by which the most applicable alternative construction materials and procedures are considered in order to obtain an environmentally and economically sustainable most holy theotokos. Applying this analyze to the most holy theotokos revealed that many alternatives are capable of making a tangible reduction in the cost of electrical energy consumption and the cost of fuel for generators. Such reductions are noticed when altering in the optimum manner. The alteration of construction materials for walls and roofs also reduces the cost of electrical energy consumption and fuel for generators. The results show that changing the plug load efficiency in the optimal manner reduces the cost of electrical energy consumption by approximately 933913 US dollar ($), and changing the heating, ventilating, and air conditioning systems (HVAC) reduces the cost of fuel energy consumption by approximately 13522 US Dollar ($). Green building studio (GBS) is a tool that helps in the early stages of a project to find the best ways to save energy.

Słowa kluczowe

EN

autodesk; insight 360 cloud; building information modelling; BIM; construction project; energy efficiency; historic building; sustainable design; design parameter

PL

autodesk; chmura 360°; modelowanie informacji o budynku; BIM; projekt budowlany; efektywność energetyczna; budynek zabytkowy; projektowanie zrównoważone; parametr projektowy

• Wydawca: Komitet Inżynierii Lądowej i Wodnej PAN ; Politechnika Warszawska, Wydział Inżynierii Lądowej
• Czasopismo: Archives of Civil Engineering
• Rocznik: 2023
• Tom: Vol. 69, nr 2
• Strony: 535--549
• Opis fizyczny: Bibliogr. 25 poz., il., tab.

Twórcy

autor

Abdullah Oday Hammody

• University of Baghdad, Civil Engineering Department, Baghdad, Iraq

• https://orcid.org/0000-0001-5002-3882

autor

Hatem Wadhah Amer

• Middle Technical University, Baquba Technical Institute, Baquba, Iraq

• https://orcid.org/0000-0001-9944-2068

Bibliografia

• [1] Y.A. Ali, “Building an expert system for consultants and contractors performance in overpasses projects”, M.A. thesis, University of Technology, Building and Construction Engineering Department, Iraqi, 2018.
• [2] L.C.K. Chitkara, Construction project management: planning, scheduling and controlling. Tata Mc Graw-Hill Education, 2010.
• [3] A. Walker, Project management in construction. John Wiley & Sons, 2015.
• [4] M.H. Yahya, “Cost optimization during design stage in projects of school buildings using value engineering”, M.A. thesis, University of Technology, Building and Construction Engineering Department, Iraqi, 2018.
• [5] S.M. Levy, Project management in construction. Mc Graw-Hill Education, 2018.
• [6] M.M. Darwish, M.F. Agnello, and R. Burgess, “Incorporating sustainable development and environmental ethics into construction engineering education”, in 8th Latin American and Caribbean Conference for Engineering and Technology (LACCEI, 2010). Lubbock, Texas, USA, 2010, pp. 2-5.
• [7] H. Zabihi, F. Habib, and L. Mirsacedie, “Sustainability in building and construction: revising definitions and concepts”, International Journal of Sciences, vol. 2, no. 4, pp. 570-578, 2012.
• [8] J.C. Kibert, Sustainable construction. John Wiley & Sons, 2013.
• [9] M. Wahlstrom, et al., Environmentally sustainable construction products and materials - assessment of release and emissions. Nordic Innovation Publication, 2014, pp. 17.
• [10] E.J. Anderson, et al., Sustainable structural engineering. International Association for Bridge and Structural Engineering, 2015.
• [11] X. Wu and Y.Y. Zhi, “Study on daylighting mode of energy-efficient buildings”, Polityka Energetyczna-Energy Policy Journal, vol. 24, no.2, pp. 183-206, 2021, doi: 10.33223/epj/136076.
• [12] R.L. Peurifoy, et al., Construction planning, equipment and methods. Mc Graw-Hill Education, 2018.
• [13] S. Mordue and R. Finch, BIM for Construction Health and Safety. Published by Riba Publishing, 2014.
• [14] F.F. Taha, “Achieving net-zero energy in educational buildings using BIM”, M.A. thesis, University of Diyala, Collage of Engineering, Iraqi, 2020.
• [15] C.J. Schexnayder and C.M. Fiori, Handbook for building construction: administration, materials, design, and safety. Mc Graw-Hill Education, 2021.
• [16] S. Azhar, M. Khalfan, and T. Maqsood, “Building information modelling (BIM): now and beyond”, Construction Economics and Building, vol. 12, no. 4, pp. 15-28, 2015, doi: 10.5130/AJCEB.v12i4.3032.
• [17] F.F. Taha, W.A. Hatem, and N.A. Jasim, “Effectivity of BIM technology in using green energy strategies for construction projects”, Asian Journal of Civil Engineering, vol. 21, no. 6, pp. 995-1003, 2020, doi: 10.1007/s42107-020-00256-w.
• [18] L. Chen and H. Qu, “Evaluation for economics and legislative factors influence the design team and contractor throughout a building project from inception to completion”, Journal of System and Management Sciences, vol. 1, no. 6, pp. 94-108, 2011.
• [19] H.R. Abed, W.A. Hatem, and N.A. Jasim, “Role of BIM technology in enhancing safety analysis of Iraqi oil projects”, Asian Journal of Civil Engineering, vol. 21, no. 4, pp. 695-706, 2020, doi: 10.1007/s42107-020-00231-5.
• [20] S. Biel, “Concept of using the BIM technology to support the defect management process”, Archives of Civil Engineering, vol. 67, no. 2, pp. 209-229, 2021, doi: 10.24425/ace.2021.137164.
• [21] W. Celadyn, “An investigation of the potential of dematerialization to reduce the life cycle embodied energy of buildings”, Archives of Civil Engineering, vol. 67, no. 4, pp. 59-77, 2021, doi: 10.24425/ace.2021.138486.
• [22] L.M. Kodeir and A.A. Nessim, “BIM2BEM integrated approach: examining status of the adoption of building information modelling and building energy models in Egyption architectural firms”, Ain Shows Engineering Journal, vol. 9, no. 4, pp. 1781-1790, 2018, doi: 10.1016/j.asej.2017.01.004.
• [23] A.S. Graczyk, Z. Walczak, B. Ksit, and Z. Szyguła, “Multi-criteria diagnostics of historic buildings with the use of 3D laser scanning (a case study)”, Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 70, no. 2, 2022, doi: 10.24425/bpasts.2022.140373.
• [24] I. Piech, T. Adam, and P. Dudas, “3D modelling with the use of photogrammetric methods”, Archives of Civil Engineering, vol. 68, no. 3, pp. 481-500, 2022, doi: 10.24425/ace.2022.141898.
• [25] R.D. Woodson, Be a successful green builder. Mc Graw-Hill Education, 2009.