PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Main measurement and automation nodes of magnetic nanoparticles heater: student project

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
At carrying out the experiments to determine the losses for heating of magnetic nanoparticles (MNP) and composites on their basis, which are commonly used in the cancer treatment, it is necessary to reduce the number of manually regulated processes, e.g.: frequency change and resonance adjustment, alternating magnetic field strength amplitude change, as well as the measurements. In present article structural diagram of device for such purposes with improved automation level is presented and circuit engineering solutions for main measurement and automation nodes are proposed. There is an attempt to perform a purely electronic control of current flowing through the heating solenoid coil to adjust the magnetic field strength applied to the MNP sample without using any additional power electronics components.
Twórcy
  • Lviv Polytechnic National University, 79013 Lviv, Ukraine
Bibliografia
  • [1] Tabatei S. N. (2009) Magnetic Nanoparticles Encapsulated in Hydrogel as Hyperthermic Actuators for Microrobots Designed to Operate in Vascular Network, Intern. Conf. on Intell. Robots and Systems Proc., p. 546-551.
  • [2] Samchenko R. (2012) “Heating and temperature measurement of magnetic nanoparticles based composites,” XIV Intern. PhD Workshop OWD, Available: mechatronika.polsl.pl/owd/pdf2012/531.pdf
  • [3] Beković M., Hamler A. (2012) “Experimental system for determining the magnetic losses of superparamagnetic materials; planning, realization and testing”, Applied Measurement Systems, InTech P.63-76
  • [4] Rosensweig, R.E. (2002) “Heating magnetic fluid with alternating magnetic field,” Journ. of Magnetism and Magnetic Materials, Vol. 252, p. 370-374
  • [5] Samchenko, R. (2012) “The use of mathematical models for approximate estimation induction heating magnetic nanoparticles” Proc. of intern. Conf “Recent directions of theoretical and applied researches’2012”, Retrieved from: http://sworld.com.ua/konfer26/128.pdf
  • [6] Samchenko R.P., Stadnyk B. I. (2013) "The method of LC-circuit stepwise resonant frequency change",Sc. and Prod. Journ. of Metrology and Instruments" Vol. 2/II/(41), pp. 207-215
  • [7] Bumett R. (2008) “High frequency induction heating,” Richie ’s Tesla Coil Webapage, Available: http://www.richieburnett.co.uk/indheat.html
  • [8] N.V. Zernov, V.H. Karpov (1965) Chapter IV: Resonant circuits under harmonic influence in Teoriya radiotehnicheskih tsepey, Moscow, pp. 159-220
  • [9] Kuhtetskyi S. (2011) Simple laboratory inverter for induction heationg. Part 3, RAN, Retrieved from: http://www.icct.ru/Practicality/Papers/27-01-2012/Archive/Invertor-07.pdf
  • [10] Afanasjev V. (1989) Current transformers, 2nd Edition, Leningrad, ISBN 5-293-04444-0
  • [11] P. Horowitz, W. Hill (1989) The Art of Electronics 2“d Edition, Cambridge University Press, New York, 1125 p.
  • [12] D.A. Dapkus (1994) Using MOS-Gated Power Transistor in AC Switch Applications Retrieved from: http://www.irf.com/technical-info/designtp/dt94-5.pdf
  • [13] Craig N. Lambert (1997) Low-voltage multi-output current mirror circuit with improved power supply rejection mirrors and method therefor, US Patent 5625281 A
  • [14] Samchenko R. (2013) “Automation level improvement of device for magnetic nanoparticles heating losses determination,” Conference Archives PTETiS XV International PhD Workshop OWD, Wisla, Available: mechatronika.polsl.pl/owd/pdf2013/Samchenko_OWD_2013.pdf
  • [15] Beković M., Trlep M. et al. (2013) ,,An experimental study of magnetic-field and temperature dependence on magnetic fluid’s heating power,“ Journ. of Magnetism and Magnetic Materials Vol. 331, pp 261-268
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cedcbf5d-98bc-434b-93fd-9e53d4eb4098
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.