Investigation of Dimensional Changes During Garment Production and Suggestions for Solutions

• Autorzy: Kalkanci M , Kurumer G.

Identyfikatory

DOI

10.5604/12303666.1151688

Warianty tytułu

PL

Badanie problemu zmian wymiarów podczas produkcji odzieży i propozycje usprawnień dla zwiększenia wydajności produkcji

• Języki publikacji: EN

Abstrakty

EN

Dimensional change problems experienced in textile products have always been an important subject and in the focus of attention. Today it is expected that dimensional changes in fabrics, the basic material of textile products, must range within certain limitations. Fabrics processed in the finishing divisions are wound or decatized in various forms according to the fabric structure and the demands of garment manufacturers. However, fabrics may be distorted in these storing processes, which results in undesired dimensional changes under the stress incurred. Nevertheless fabrics are required to be delivered to garment manufacturers at specific tension values. Indeed these values are not acquired as expected; consequently, it is known that they represent a core conflict subject between finishing plants and garment manufacturers. The present study investigated the structures of garment manufacturers and dimensional change problems they experience during fabric layout. The aim was to determine the severity of the problem in terms of the garment manufacturer and fabric types, which cause problems frequently, and to search for solutions to overcome this issue by means of a survey study. Solutions which would increase production efficiency and reduce processing time have been emphasized.

PL

Problem zmiany wymiarów tekstyliów w czasie produkcji odzieży jest bardzo ważnym problemem, a zakres zmian musi być poddany określonym ograniczeniom. Tekstylia obrabiane w procesach wykończalniczych są następnie nawijane i dekatyzowane w określonych warunkach i powinny być dostarczane do wytwórcy pod określonym naprężeniem. Celem artykułu jest zwrócenie uwagi na ważność problemu z punktu widzenia wytwórcy odzieży oraz określenie rozwiązań, które prowadziłyby do zwiększenia wydajności i skrócenia czasu produkcji.

Słowa kluczowe

EN

dimensional change; knitted fabric; relaxation; relaxation time

PL

zmiana wymiarów; dzianina; relaks; czas relaksacji

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2015
• Tom: Vol. 23, no. 3 (111)
• Strony: 8--13
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Kalkanci M

• Buldan Vocational College, Pamukkale University, Denizli, Turkey

autor

Kurumer G.

• Department of Textile Engineering, Faculty of Engineering, Dokus Eylül University, Izmir, Turkey

Bibliografia

• 1. Çoban S. General Textile Finishing Processes, Bornova-İzmir, 1999: 314.
• 2. Lazar K. Connection Between the Areal Density of the Plain Single Jersey Fabric, the Loop Length and the Yarn Count. Melliand English 1991; 8: E20.
• 3. Çeken F, Yapısında Farklı Materyaller İçeren Kumaşların Boyutsal Özellikleri Üzerine Bazı Araştırmalar. Fen Bilimleri Enstitüsü, PhD Thesis, Ege University, İzmir, 1995: 235.
• 4. Haas F. Modern Technologies in Knitwear Finishing. Santex AG. 1995, 9555 Tobel, Switzerland.
• 5. Gersak J, Sajn D, Bukosek V, A study of the Relaxation Phenomena in the Fabrics Containing Elastane Yarns. International Journal of Clothing Science and Technology, 2005, DOI: http://dx.doi.org/10.1108/09556220510590885.
• 6. Jeddi AA, Mohammedi V, Rarimzadeh H, Honarvar B. Knitted Fabric Relaxation by Ultrasound and Its Characterization with Yarn-Pullout Force. Fibers and Polymers 2007; 8, 4: 408-413.
• 7. Chathura N, Herath C, Bok CK. Dimensional Stability of Core Spun Cotton/Spandex Single Jersey Fabrics Under Relaxation. Textile Research Journal 2008; 78(3): 209- 216.
• 8. Lia Q, Bradya PR, Wanga XG. The Effect Of Fabric Strain During Pressure Steaming On Fabric Dimensional Properties. Journal Of The Textile Institute 2008; 99, 6: 591 – 596.
• 9. Kumar V, Sampath VR. Investigation On The Physical And Dimensional Properties Of Single Jersey Fabrics Made From Cotton Sheath - Elastomeric Core Spun. Fibres & Textiles in Eastern Europe 2013; 21, 3(99): 73-75.
• 10. Marmarali AB. Dimensional and Physical Properties of Cotton/Spandex Single Jersey Fabrics. Textile Research Journal 2003; 73(1): 11-14.
• 11. Önal L, Candan C. Contribution of Fabric Characteristics and Laundering to Shrinkage of Weft Knitted Fabrics. Textile Research Journal 2003; 73(3): 187-191.
• 12. Beceren Y, Candan C, Cimilli S, Ülger K. Properties of Plain Knits from Siro-Spun Viscose/Spandex Yarns. Fibres & Textiles in Eastern Europe 2010; 18, 1(78): 41-46.
• 13. Bhattacharya S. Application of Artificial Neural Networks for Prediction of Shrinkage of Single Jersey Cotton Knit Fabrics. In: 6th International Conference-TEXSCI 2007 Bildiri Kitabı, Çek Cumhuriyeti-Liberec, 2007: 237-239.
• 14. Saravana KT, Sampath VR. An Artificial Neural Network System For Prediction of Dimensional Properties of Weft Knitted Rib Fabric. J. Text. Assn. 2011; 71(5): 247– 250.
• 15. Saravana KT, Sampath VR. Prediction of Dimensional Properties of Weft Knitted Cardigan Fabric by Artificial Neural Network System. Journal of Industrial Textiles 2013; 42(4): 446–458.