Practical Approach to Determining Dynamic Recrystallization Parameters Using Finite Element Optimization of Backward Extrusion Process

Irani, Missam; Joun, Mansoo

doi:10.24425/amm.2019.129510

Artykuł - szczegóły

Tytuł artykułu

Practical Approach to Determining Dynamic Recrystallization Parameters Using Finite Element Optimization of Backward Extrusion Process

Autorzy

Irani Missam , Joun Mansoo

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.24425/amm.2019.129510

Warianty tytułu

Języki publikacji

Abstrakty

In this study, we present a new method for obtaining the parameters of the Johnson-Mehl-Avrami-Kolmogorov equation for dynamic recrystallization grain size. The method consists of finite-element analysis and optimization techniques. An optimization tool iteratively minimizes the error between experimental values and corresponding finite-element solutions. Isothermal backward extrusion of the AA6060 aluminum alloy was used to acquire the main parameters of the equation for predicting DRX grain size. We compared grain sizes predicted using optimized and reference parameters with experimental values from the literature and found better agreement when the optimized parameters were applied.

Słowa kluczowe

dynamic recrystallization grain size optimization simulation

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Czasopismo

Archives of Metallurgy and Materials

Rocznik

2019

Tom

Vol. 64, iss. 3

Strony

1175--1182

Opis fizyczny

Bibliogr. 42 poz., rys., tab., wzory

Twórcy

autor

Irani Missam

Gyeongsang National University, Graduate School of Mechanical and Aerospace Engineering, Jinju-City, 664-953, Republic of Korea

autor

Joun Mansoo

msjoun@gnu.ac.kr

Gyeongsang National University, Recaft, School of Mechanical and Aerospace Engineering, Jinju-City, 664-953, Republic of Korea

Bibliografia

[1] H. Hallberg, Metals. 1, 16-48(2011).
[2] S. Naghdy, A. Akbarzadeh, Mater. Des. 53, 910-914 (2014).
[3] H. Matsumoto, V. Velay, J. Alloys Compd. 708, 404-413 (2017).
[4] H. Mirzadeh, M. H. Parsa, D. Ohadi, Mater. Sci. Eng. A. 569, 54-60 (2013).
[5] Y. C. Lin, M.-S. Chen, Mater. Sci. Eng. A. 501,229-234 (2009).
[6] Y. C. Lin, L.-T. Li, Y.-C. Xia, Comput. Mater. Sci. 50, 2038-2043 (2011).
[7] D.-G. He, Y. C. Lin, M.-S. Chen, L. Li, J. Alloys Compd. 690, 971-978 (2017).
[8] M. Seyed Salehi, S. Serajzadeh, Comput. Mater. Sci. 53, 145-152 (2012).
[9] Y. C. Lin, Y.-X. Liu, M.-S. Chen, M.-H. Huang, X. Ma, Z.-L. Long, Mater. Des. 99, 145-152 (2016)
[10] F. Ren, F. Chen, J. Chen, Adv. Mater. Sci. Eng. 2014,1-16 (2014).
[11] Y. C. Lin, J. Zhang, J. Zhong, Comput. Mater. Sci. 43, 752-758 (2008).
[12] A. Momeni, S. M. Abbasi, A. Shokuhfar, J. Iron Steel Res. Int. 14, 66-70 (2007).
[13] R. Ebrahimi, S. H. Zahiri, A. Najafizadeh, J. Mater. Process. Technol. 171, 301-305 (2006).
[14] Y.-C. Lin, M.-S. Chen, J. Zhang, Mater. Sci. Eng. A. 499, 88-92 (2009).
[15] A. Cingara, H. J. McQueen, J. Mater. Process. Technol. 36, 17-30 (1992).
[16] S. M. Abbasi, A. Shokuhfar, Mater. Lett. 61 (2007).
[17] F. Chen, Z. Cui, D. Sui, B. Fu, Mater. Sci. Eng. A. 540, 46-54 (2012).
[18] F. Chen, Z. Cui, J. Chen, Manuf. Rev. 1, 6 (2014).
[19] J. Liu, Z. Cui, L. Ruan, Mater. Sci. Eng. A. 529, 300-310 (2011).
[20] L. Donati, J. S. Dzwonczyk, J. Zhou, L. Tomesani, Key Eng. Mater. 367, 107-116 (2008).
[21] M. Fanfoni, M. Tomellini, Nuovo Cimento. 20, 1171-1182 (1998).
[22] L. Fratini, G. Buffa, Int. J. Mach. Tools Manuf. 45, 1188-1194 (2005).
[23] H.R.R. Ashtiani, P. Karami, Model. Numer. Simul. Mater. Sci. 05, 1-14 (2015).
[24] L. Donati, A. Segatori, M. El Mehtedi, L. Tomesani, Int. J. Plast. 46, 70-81 (2013).
[25] Y.-C. Lin, M.-S. Chen, J. Zhang, Mater. Sci. Eng. A. 499, 88-92 (2009).
[26] Q. Zuo, F. Liu, L. Wang, C. Chen, Z. Zhang, Prog. Nat. Sci. Mater. Int. 25, 66-77 (2015).
[27] H. Mirzadeh, M. H. Parsa, D. Ohadi, Mater. Sci. Eng. A. 569, 54-60 (2013).
[28] J. Lin, J. Mater. Process. Technol. 143-144, 281-285 (2003).
[29] J.-S. Chou, A.-D. Pham, Inf. Sci. 399, 64-80 (2017).
[30] M. Schikorra, L. Donati, L. Tomesani, A. E. Tekkaya, J. Mater. Process. Technol. 201, 156-162 (2008).
[31] J.P.C. Kleijnen, Simul. Model. Pract. Theory. 16, 50-64 (2008).
[32] G. Gary Wang, Z. Dong, P. Aitchison, Eng. Optimiz. 33 (6), 707-733 (2007)
[33] M. Irani, M. Joun, Comput. Mater. Sci. 142, 178-184 (2018).
[34] M. Irani, M. Joun, Practical Approach to Determining Material Parameters in Microstructure Evolution, in: The Korean Society for the Technology of Plasticity, 122-123 (2017).
[35] M. Irani, M. Joun, Obtaining parameters of dynamic recrystallization kinetics using FEM and optimization technique, in: The Korean Society for the Technology of Plasticity, 91-92 (2017).
[36] M. Irani, S. G. Lim, M. Joun, Acquisition of Coefficients of JMAK Model for Microstructural Evolution using a Hot Forging Process of Outer Race, in: The Korean Society for the Technology of Plasticity, 140-141 (2018).
[37] J. G. Eom, Y. H. Son, S. W. Jeong, S. T. Ahn, S. M. Jang, D. J. Yoon, M. S. Joun, Mater. Des. 54, 1010-1018 (2014).
[38] M. Joun, J. G. Eom, M. C. Lee, Mech. Mater. 40, 586-593 (2008).
[39] M. C. Lee, S. H. Chung, S. M. Jang, M. S. Joun, Finite Elem. Anal. Des. 45, 745-754 (2009).
[40] M. S. Joun, H. G. Moon, I. S. Choi, M. C. Lee, B. Y. Jun, Tribol. Int. 42, 311-319 (2009).
[41] Y. Prasad, K. P. Rao, S. Sasidhar, hot working guide a compendium of processing maps, ASM international, 2015.
[42] C. Bandini, B. Reggiani, L. Donati, L. Tomesani, in: MADISON, Chicago IL, USA, 789-800 (2016)

Uwagi

1. This work is supported by the BK 21 plus, WC300 project for industry-university cooperative research of the Korean Small and Medium Business Administration.

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-cec16557-7c93-4f2f-9828-3d61a7eef3ae