Microstructure and Mechanical Properties of Stainless Steel/Aluminum Multilayer Composites by One-Step Explosive Welding

• Autorzy: Hu Xiaoyan , Liu Yingbing , Yang Li , Huang Xiaochen

Identyfikatory

DOI

10.24425/amm.2023.145495

• Języki publikacji: EN

Abstrakty

EN

The stainless steel/aluminum multilayer composites were prepared by one-step explosive welding using ammonium nitrate explosive with two different thicknesses. The microstructure and mechanical properties of the multilayer composites were examined. There is a thin metallurgical melting zone at each bonding interface, consisting mostly of iron and aluminum elements. However, the micro-crack appears in the second metallurgical bonding zone obtained using the explosive of 24 mm thickness. The micro-hardness values at the four bonding interfaces are higher than those of bulk 1060 aluminum and 304 ­stainless steel. The yield strength of the multilayer composites obtained in the two cases is higher than that of the original 304 stainless steel while the tensile strength is between those of the original 1060 aluminum and 304 stainless steel. Meanwhile, the tensile strength and yield strength of multilayer composites obtained by explosive welding with explosive of 20 mm thickness are relatively higher.

Słowa kluczowe

EN

multilayer composites; one-step explosive welding; bonding interface; micro-hardness; mechanical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1211--1217
• Opis fizyczny: Bibliogr. 46 poz., fot., rys., tab., wzory

Twórcy

autor

Hu Xiaoyan

• North University of China, School of Environment and Safety Engineering, Taiyuan 030051, China

• https://orcid.org/0000-0001-8203-501X

autor

Liu Yingbing

• North University of China, School of Environment and Safety Engineering, Taiyuan 030051, China

• https://orcid.org/0000-0002-4795-4173

autor

Yang Li

• Military Products Research Institute, Shanxi Jiangyang Chemical Co., Ltd., Taiyuan 030051, China

• https://orcid.org/0000-0003-1375-3450

autor

Huang Xiaochen

• Capital Aerospace Machinery Corporation Limited, Beijing 100076, China

• https://orcid.org/0000-0002-5231-7080

Bibliografia

• [1] A. Gullino, P. Matteis, F. D’Aiuto, Metals-Basel 9, 315 (2019).
• [2] M.M. Atabaki, M. Nikodinovski, P. Chenier, J. Ma, M. Harooni, R. Kovacevic, Journal for Manufacturing Science and Production 14, 59-78 (2014).
• [3] R. Indhu, S. Soundarapandian, L. Vijayaraghavan, J. Mater. Process. Technol. 262, 411-421 (2018).
• [4] Z. Shen, Y. Ding, J. Chen, B.S. Amirkhiz, J.Z. Wen, L. Fu, A.P. Gerlich, Journal of Materials Science & Technology 35, 1027-1038 (2019).
• [5] P. Li, S. Chen, H.G. Dong, H. Ji, Y.B. Li, X. Guo, G.S. Yang, X.S. Zhang, X. L. Han, J. Manuf. Process. 49, 385-396 (2020).
• [6] H. Shan, Y.W. Ma, S.Z. Niu, B.X. Yang, M. Lou, Y.B. Li, Z.Q. Lin, J. Mater. Process. Tech. 295, 117156 (2021).
• [7] H.R. Akramifard, H. Mirzadeh, M.H. Parsa, Mat. Sci. Eng. a-Struct. 613, 232-239 (2014).
• [8] Y.L. Li, Y.R. Liu, J. Yang, Optics and Laser Technology 122, 105875 (2020).
• [9] W.H. Zhang, D.Q. Sun, L.J. Han, D.Y. Liu, Mater. Design. 57, 186-194 (2014).
• [10] S.Q. Hu, A.S. Haselhuhn, Y.W. Ma, Y.B. Li, B.E. Carlson, Z.Q. Lin, J. Manuf. Process. 68, 534-545 (2021).
• [11] G.L. Qin, Z.Y. Ao, Y. Chen, C.S. Zhang, P.H. Geng, J. Mater. Process. Tech. 273, 116255 (2019).
• [12] F. Yan, K. Zhang, B.Y. Yang, Z. Chen, Z.W. Zhu, C.M. Wang, Optics and Laser Technology 138, 106834 (2021).
• [13] H.P. Yu, H.Q. Dang, Y.N. Qiu, J. Mater. Process. Tech. 250, 297-303 (2017).
• [14] S.M. Aceves, F. Espinosa-Loza, J.W. Elmer, R. Huber, Int. J. Hydrogen Energy 40, 1490-1503 (2015).
• [15] F. Findik, Mater. Design. 32, 1081-1093 (2011).
• [16] N. Becker, D. Gauthier, E.E. Vidal, International Journal of Fatigue 139, 105736 (2020).
• [17] X.J. Sun, J. Tao, X.Z. Guo, T. Nonferr. Metal. Soc. 21, 2175-2180 (2011).
• [18] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, Mater. Charact. 155, 109819 (2019).
• [19] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, J. Mater. Process. Tech. 283, 116707 (2020).
• [20] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, Metals-Basel 10, 1062 (2020).
• [21] Q. Chu, T. Xia, P. Zhao, M. Zhang, J. Zheng, F. Yan, P. Cheng, C. Yan, C. Liu, H. Luo, Mat. Sci. Eng. a-Struct. 833, 142525 (2022).
• [22] C.W.D. Kumar, S. Saravanan, K. Raghukandan, Transactions of the Indian Institute of Metals 72, 3269-3276 (2019).
• [23] X. Li, H. Ma, Z. Shen, Materials & Design 87, 815-824 (2015).
• [24] H. Pouraliakbar, G. Khalaj, M.R. Jandaghi, A. Fadaei, M.K. Ghareh-Shiran, S.H. Shim, S.I. Hong, International Journal of Pressure Vessels and Piping 188, 104216 (2020).
• [25] M. Yang, H.-H. Ma, Z.-W. Shen, D.-G. Chen, Y.-X. Deng, T. Nonferr. Metal. Soc. 29, 680-691 (2019).
• [26] Y.-l. Sun, H.-H. Ma, M. Yang, Z.-W. Shen, N. Luo, L.-Q. Wang, Coatings 10, 1031 (2020).
• [27] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, J. Mate. Process. Tech. 262, 340-349 (2018).
• [28] M.K.G. Shiran, S.J.M. Baygi, S.R. Kiahoseyni, H. Bakhtiari, M.A. Dadi, International Journal of Damage Mechanics 27, 488-506 (2018).
• [29] M.K.G. Shiran, G. Khalaj, H. Pouraliakbar, M. Jandaghi, H. Bakhtiari, M. Shirazi, Int. J. Min. Met. Mater. 24, 1267-1277 (2017).
• [30] T. Izuma, K. Hokamoto, M. Fujita, M. Aoyagi, Welding International 6, 941-946 (1992).
• [31] H. Mansouri, B. Eghbali, M. Afrand, J. Manuf. Process 46, 298-303 (2019).
• [32] V.I. Lysak, S.V. Kuzmin, J. Mater. Process. Technol. 222, 356-364 (2015).
• [33] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, Mater. Charact. 142, 432-442 (2018).
• [34] X.-J. Sun, J. Tao, X.-Z. Guo, Transactions of Nonferrous Metals Society of China 21, 2175-2180 (2011).
• [35] M. Yang, H. Ma, Z. Shen, Y. Sun, Fusion Eng. Des. 143, 106-114 (2019).
• [36] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, Int. J. Adv. Manuf. Tech. 103, 3211-3221 (2019).
• [37] G.H.S.F.L. Carvalho, I. Galvao, R. Mendes, R.M. Leal, A. Loureiro, Sci. Technol. Weld. Joining 23, 501-507 (2018).
• [38] H.B. Xia, S.G. Wang, H.F. Ben, Materials & Design 56, 1014-1019 (2014).
• [39] M.H. Bina, F. Dehghani, M. Salimi, Mater. Design 45, 504-509 (2013).
• [40] Z. Zheng, explosive working, National Defense Industry Press, Beijing (1981).
• [41] M.M.H. Athar, B. Tolaminejad, Mater. Design 86, 516-525 (2015).
• [42] A. Koch, N. Arnold, M. Estermann, Propellants, Explosives, Pyrotechnics 27, 365-368 (2002).
• [43] G.H.S.F.L. Carvalho, I. Galvão, R. Mendes, R.M. Leal, A. Loureiro, J. Mater. Process. Tech. 262, 340-349 (2018).
• [44] M. Fan, W. Yu, W. Wang, X. Guo, K. Jin, R. Miao, W. Hou, N. Kim, J. Tao, J. Mater. Eng. Perform. 26, 277-284 (2017).
• [45] S.V. Gladkovsky, S.V. Kuteneva, S.N. Sergeev, Mater. Charact. 154, 294-303 (2019).
• [46] X. Guo, M. Fan, L. Wang, F. Ma, J. Mater. Eng. Perform. 25, 2157-2163 (2016).

Uwagi

This paper is supported by the National Science Foundation for Young Scientists of China (Grant Nos. 12002319, 11802274) and Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxi (Grant Nos. 2020L0273, 2020L0312).