Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
As sodium sulfide is easily oxidized to polysulfide and thiosulfate which have a gold leaching effect, gold would dissolve in leaching solution when extracting stibium from gold containing antimony concentrate by alkaline sulfide. Through leaching test and kinetics analysis, the decomposition regularity of sodium sulfide and leaching rate were studied under different leaching conditions. The results indicated that the gold content in antimony concentrate was 28.41g/Mg, and the content of antimony and sulfur was 36.01% and 14.04%, respectively. The main metallic minerals were native gold, arsenopyrite, stibnite, and the gangue minerals were mainly quartz. Anodic polarization curve shows reduced iron powder can increase the peak potential of the oxidation of the leaching solution and it can effectively prevent the decomposition of sodium sulfide and the dissolution of gold. Optimized stibium-extraction efficiency was achieved under the following conditions: a concentration of sodium sulfide and sodium hydroxide at 110g/dm³ and 20g/dm³, respectively; a ratio of iron powder to concentrate of 1:30; a ratio of liquid to solid of 5:1; agitation speed of 600rad/min; reaction temperature of 353.15K; and a reaction time of 3 h. Under the optimized conditions, high antimony recovery (97.35%) and low gold dissolution (1.32%) were achieved.
Słowa kluczowe
Rocznik
Tom
Strony
248--257
Opis fizyczny
Bibliogr. 24 poz., rys., tab.
Twórcy
autor
- School of Civil and Resource Engineering, University of Science and Technology Beijing China
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China)
autor
- School of Civil and Resource Engineering, University of Science and Technology Beijing, China
autor
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China)
autor
- School of Civil and Resource Engineering, University of Science and Technology Beijing, China
autor
- School of Civil and Resource Engineering, University of Science and Technology Beijing, China
Bibliografia
- ANDERSON, C.G., 2012. The metallurgy of antimony. Chem. Erde. 72(72), 3-8.
- ANDERSON, C.G., 2016. Alkaline sulfide gold leaching kinetics. Minerals Engineering. 92, 248-256.
- CELEP, O., İBRAHIM, A., DEVECI, H., 2011. Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leach. Hydrometallurgy. 105(3–4), 234-239.
- GUO, X.Y., XIN, Y.T., WANG, H., TIAN, Q.H., 2017. Mineralogical characterization and pretreatment for antimony extraction by ozone of antimony-bearing refractory gold concentrates. T. Nonferr. Metal. Soc. 27(8), 1888-1895.
- GUO, X.Y., YI, Y., JING, S., TIAN Q.H., 2016. Leaching behavior of metals from high-arsenic dust by NaOH–Na2S alkaline leaching. T. Nonferr. Metal. Soc. 26, 575-580.
- HUANG, Y.J., LIU, S.P., LIU, M., 2003. Experimental study on comprehensive utilization of associated mineral of gold and antimony. Gold. 24(4), 33-36. (in Chinese)
- JANUSZ, W., SKWAREK, E., 2018. Effect of Co(II) ions adsorption in the hydroxyapatite/aqueous NaClO4 solution system on particles electrokinetics. Physicochem. Probl. Miner. Process. 54(1), 31-39.
- KIVILUOMA, M., AALTONEN, M., AROMAA, J., LUNDSTROM, M., FORSEN, O., 2016. Development of characterization methods for adherent anode slimes in copper electrorefining. Physicochem. Probl. Miner. Process. 52(1), 295-302.
- KOWALCZUK, P.B., MANAIG, D.O., DRIVENES, K., SNOOK, B., AASLY, K., KLEIV, R.A., 2018. Galvanic leaching of seafloor massive sulphides using MnO2 in H2SO4-NaCl media. Minerals 8(6), 235.
- LI, H.X., WANG, Y., CANG, D.Q., 2010. Zinc leaching from electric arc furnace dust in alkaline medium. J. Cent. South. Univ. T. 17(5), 967-971.
- MAHLANGU, T., GUDYANGA, F.P., SIMBI, D.J., 2006. Reductive leaching of stibnite (Sb2S3) flotation concentrate using metallic iron in a hydrochloric acid medium I: Thermodynamics. Hydrometallurgy. 84(3), 192-203.
- MULTANI, R.S., FELDMANN, T., Demopoulos G.P., 2016. Antimony in the metallurgical industry: A review of its chemistry and environmental stabilization options. Hydrometallurgy. 164, 141-153.
- QIN, W.Q., QIU, G.Z., HU, Y.H., 2000. Electrochemical oxidation of sodium sulfide on rotating ring-disc electrode. T. Nonferr. Metal. Soc. S1, 80-82.
- RASCHMAN, P., SMINCAKOVA, E., 2012. Kinetics of leaching of stibnite by mixed Na2S and NaOH solutions. Hydrometallurgy. 113-114(3), 60-66.
- SAYINER, B., 2015. Application of leaching kinetics modelling to a gold cyanide leach plant by using real plant data. Physicochem. Probl. Miner. Process. 51(1), 109-114.
- SPEIGHT, J.G., 2005. Lange’s handbook of chemistry 16th Ed. McGrawHill, 380-396
- UBALDINI, S., VEGLIO, F., FORNARI, P., ABBRUZZESE, C., 2000. Process flow-sheet for gold and antimony recovery from stibnite. Hydrometallurgy. 57(3), 187-199.
- WEN, Q.J., WU, Y.F., WANG, X., ZHUANG, Z.Y., YU, Y., 2017. Researches on preparation and properties of sodium polysulphide as gold leaching agent. Hydrometallurgy. 171, 77-85.
- YANG, T.Z., RAO, S., LIU, W.F., ZHANG, D.C., CHEN, L., 2017. A selective process for extracting antimony from refractory gold ore. Hydrometallurgy. 169, 571-575.
- YANG, Y.B.,LIU, B.,LI, Q.,JIANG, T., 2014. Comprehensive recovery of Au and Sb from an antimony-gold concentrate. Mining and Metallurgical Engineering. 34(6), 97-100. (in Chinese)
- YI, Q.F., 2002. Electrochemical oxidation of aqueous Na2S solution on Pt electrodes. Rare Metals. 26(6), 448-451. (in Chinese)
- YU, Q.B., WEI, Q.J., GUO, C.H., 2016. Study on leaching of high Sb-bearing gold concentrate. China Resources Comprehensive Utilization. 34(12), 19-22. (in Chinese)
- ZHANG, H.L., JIA, R.Q., SHANG, M.S., 2017. Study on the electrochemical oxidization of sulfide of alkaline solution. Multipurpose Utilization of Mineral Resources. 2, 24-26. (in Chinese)
- ZHANG, N., HAN, W.Q., WANG, L.J., 2012. Anodic Oxidation of Alkaline Sulfide Solution at a Low Potential. Advanced Materials Research. 356-360, 1367-1370.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ce6dd3cd-352d-4e55-90e0-5ef5322552d6