PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Improving Sound Insulation in Low Frequencies by a Three-Component Cladding Acoustic Metamaterial Panel

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper, a three-component cladding acoustic metamaterial panel with good sound insulation effect in the low-frequency range is proposed. The sound transmission loss of metamaterial panels under different structural configurations and different material parameters is investigated by combining finite element simulation calculations with experimental research. The results show that the closer the center of gravity of the scatterer is to the substrate, the better the stability of the resonance unit, the wider the range of effective sound isolation frequencies, and the higher the degree of normalization. The filling rate of the scatterer is maintained at about 0.5 to obtain a better sound insulation effect. At the same time, choosing lower density materials for the substrate and metal materials with high density and high modulus of elasticity for the scatterer can maximally widen the bandgap and allows for low-frequency sound insulation below 600 Hz. This approach improves the low-frequency sound insulation efficiency of acoustic metamaterials. The results provide important explanations and references for a deeper understanding of the sound insulation mechanism and the effects of different parameters on sound insulation.
Rocznik
Strony
267--276
Opis fizyczny
Bibliogr. 32 poz., fot., rys., tab., wykr
Twórcy
autor
  • Aeronautical Engineering College, Civil Aviation University of China Tianjin, China
autor
  • Aeronautical Engineering College, Civil Aviation University of China Tianjin, China
autor
  • Aeronautical Engineering College, Civil Aviation University of China Tianjin, China
Bibliografia
  • 1. Atmojo A.Y. et al. (2021), ANC Gen1: BBTA3-BPPT 1st prototype of active noise control for vehicle cabin noise, [in:] Journal of Physics: Conference Series, 1951(1): 012030, doi: 10.1088/1742-6596/1951/1/012030.
  • 2. Badreddine Assouar M., Oudich M. (2012), Enlargement of a locally resonant sonic band gap by using double-sides stubbed phononic plates, Applied Physics Letters, 100(12): 123506, doi: 10.1063/1.3696050.
  • 3. Badreddine Assouar M., Senesi M., Oudich M., Ruzzene M., Hou Z. (2012), Broadband plate-type acoustic metamaterial for low-frequency sound attenuation, Applied Physics Letters, 101(17): 173505, doi: 10.1063/1.4764072.
  • 4. Chen D., Zi H., Li Y., Li X. (2021), Low frequency ship vibration isolation using the band gap concept of sandwich plate-type elastic metastructures, Ocean Engineering, 235: 109460, doi: 10.1016/j.oceaneng.2021.109460.
  • 5. He X.D., Wen J.H. (2018), Study on the effect of lattice constants on the sound insulation properties of acoustic metamaterial plates, Noise and Vibration Control (S1), pp. 51-55.
  • 6. Hsu J.C. (2011), Local resonances-induced low-frequency band gaps in two-dimensional phononic crystal slabs with periodic stepped resonators, Journal of Physics D: Applied Physics, 44(5): 055401, doi: 10.1088/ 0022-3727/44/5/055401.
  • 7. Hsu J.C., Wu T.T., Hsu H.S. (2013), Measurement of frequency gaps and waveguiding in phononic plates with periodic stepped cylinders using pulsed laser generated ultrasound, Journal of Applied Physics, 113(8): 083511, doi: 10.1063/1.4793491.
  • 8. Iannac G., Ciaburro G., Trematerra A. (2021), Metamaterials acoustic barrier, Applied Acoustics, 181: 108172, doi: 10.1016/j.apacoust.2021.108172.
  • 9. Jiang C., Moreau D., Fischer J., Doolan C. (2021), Additively manufactured sound-absorbing porous structures for airfoil trailing-edge noise control, Journal of Aerospace Engineering, 34(5): 04021068, doi: 10.1061/(ASCE)AS.1943-5525.0001317.
  • 10. Li S., Chen T.,Wang X., Li Y., Chen W. (2016), Expansion of lower-frequency locally resonant band gaps using a double-sided stubbed composite phononic crystals plate with composite stubs, Physics Letters A, 380(25–26): 2167-2172, doi: 10.1016/j.physleta.2016.03.027.
  • 11. Li Y., Chen T., Wang X., Xi Y., Liang Q. (2015), Enlargement of locally resonant sonic band gap by using composite plate-type acoustic metamaterial, Physics Letters A, 379(5): 412-416, doi: 10.1016/j.physleta.2014.11.028.
  • 12. Liang B., Yuan B., Cheng J.C. (2009), Acoustic diode: Rectification of acoustic energy flux in one-dimensional systems, Physical Review Letters, 103(10): 104301, doi: 10.1103/PhysRevLett.103.104301.
  • 13. Ma C., Shao C., Wan Q., Wang X., Cheng Y., Liu X. (2018), A locally-resonant phononic crystal for low-frequency vibration control of vehicle [in Chinese], Journal of Applied Acoustics, 37(1): 152-158, doi: 10.11684/j.issn.1000-310X.2018.01.022.
  • 14. Maldovan M. (2013), Sound and heat revolutions in phononics, Nature, 503(7475): 209-217, doi: 10.1038/nature12608.
  • 15. Nakayama M. et al. (2021), A practically designed acoustic metamaterial sheet with two-dimensional connection of local resonators for sound insulation applications, Journal of Applied Physics, 129(10): 105106, doi: 10.1063/5.0041738.
  • 16. Oudich M. et al. (2011), Experimental evidence of locally resonant sonic band gap in two-dimensional phononic stubbed plates, Physical Review B, 84(16): 165136, doi: 10.1103/PhysRevB.84.165136.
  • 17. Oudich M., Li Y., Assouar B.M., Hou Z. (2010), A sonic band gap based on the locally resonant phononic plates with stubs, New Journal of Physics, 12(8): 083049, doi: 10.1088/1367-2630/12/8/083049.
  • 18. Pennec Y., Djafari-Rouhani B., Larabi H., Vasseur J.O., Hladky-Hennion A.C. (2008), Low-frequency gaps in a phononic crystal constituted of cylindrical dots deposited on a thin homogeneous plate, Physical Review B, 78(10): 104105, doi: 10.1103/PhysRevB.78.104105.
  • 19. Qiu C., Liu Z. (2006), Acoustic directional radiation and enhancement caused by band-edge states of two-dimensional phononic crystals, Applied Physics Letters, 89(6): 063106, doi: 10.1063/1.2335975.
  • 20. Song Y.B., Wen J., Yu D., Wen X. (2015), Suppression of vibration and noise radiation in a flexible floating raft system using periodic structures, Journal of Vibration and Control, 21(2), 217-228, doi: 10.1177/1077 546313488156.
  • 21. Wen J., Wang G., Yu D., Zhao H., Liu Y. (2005), Theoretical and experimental investigation of flexural wave propagation in straight beams with periodic structures: Application to a vibration isolation structure, Journal of Applied Physics, 97(11): 114907, doi: 10.1063/1.1922068.
  • 22. Wen J.H., Wang G., Yu D.L., Zhao H.G., Liu Y.Z. Wen X.S. (2008), Study on the vibration band gap and vibration attenuation property of phononic crystals, Science in China Series E: Technological Sciences, 51: 85-99,doi: 10.1007/s11431-008-0008-x.
  • 23. Yang Q. et al. (2020), Simulations on the wide bandgap characteristics of a two-dimensional tapered scatterer phononic crystal slab at low frequency, Physics Letters A, 384(35): 126885, doi: 10.1016/j.physleta.2020.126885.
  • 24. Yin J. et al. (2022), Review on research progress of mechanical metamaterials and their applications on vibration and noise control [in Chinese], Advance in Mechanics, 52(3): 508-586, doi: 10.6052/1000-0992-22-005.
  • 25. Yu K., Chen T., Wang X. (2013), Band gaps in the low-frequency range based on the two-dimensional phononic crystal plates composed of rubber matrix with periodic steel stubs, Physica B: Condensed Matter, 416: 12-16, doi: 10.1016/j.physb.2013.02.011.
  • 26. Zhang J., Yao H., Du J., Zhao J., Dong Y., Qi P. (2016a), Low frequency sound insulation characteristics of the locally resonant phononic crystals in the large aircraft cabin [in Chinese], Journal of the Chinese Ceramic Society, 44(10): 1440-1445, doi: 10.14062/j.issn.0454-5648.2016.10.08.
  • 27. Zhang H., Xiao Y., Wen J., Yu D., Wen X. (2016b), Ultra-thin smart acoustic metasurface for low-frequency sound insulation, Applied Physics Letters, 108(14): 141902, doi: 10.1063/1.4945664.
  • 28. Zhao H. J., Guo H.W., Gao M.X., Liu R.Q., Deng Z.Q. (2016), Vibration band gaps in double-vibrator pillared phononic crystal plate, Journal of Applied Physics, 119(1): 014903, doi: 10.1063/1.4939484.
  • 29. Zhao H.J., Guo H.W., Li B.Y., Deng Z.Q., Liu R.Q. (2015), Flexural vibration band gaps in a double-side phononic crystal plate, Journal of Applied Physics, 118(4): 044906, doi: 10.1063/1.4927627.
  • 30. Zhou P., Wan S., Wang X., Fu J., Zhu Y. (2021), A novel hybrid composite phononic crystal plate with multiple vibration band gaps at low frequencies, Physica B: Condensed Matter, 623: 413366, doi: 10.1016/j.physb.2021.413366.
  • 31. Zhou X., Wang L., Qin L., Peng F. (2020), Improving sound insulation in low frequencies by multiple band-gaps in plate-type acoustic metamaterials, Journal of Physics and Chemistry of Solids, 146: 109606, doi: 10.1016/j.jpcs.2020.109606.
  • 32. Zuo K.C. (2016), Current status of research on aircraft cabin noise, Journal of Aviation, 37(8): 2370-2384.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ce688d9c-848c-4dae-8c03-947419021695
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.