PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The performance of the input-output linearization controller fo a doubly-fed induction machine

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Działanie regulatora linearyzacji wejście-wyjście do maszyny indukcyjnej dwustronnie zasilanej
Języki publikacji
EN
Abstrakty
EN
The objective of this paper is to study the dynamic behavior of the generator of a wind turbine based on a dual-fed machine (DFIG) connected to the grid. The stator of the DFIG is directly connected to the grid. In this paper, a nonlinear controller is presented for the doubly-fed induction machine (DFIM). The nonlinear controller is designed on the basis of input-output linearization control technique ,this technique will be given good performance and dynamics at our machine than indirect vector control method of . The paper discusses the operating principles of the active and reactive power generation scheme . The simulation results show that the proven input-output linearization control, perfect tracking of the generated active and reactive power and its robustness to active and reactive power variations.
PL
Celem niniejszej pracy jest zbadanie dynamicznego zachowania generatora turbiny wiatrowej opartej na maszynie o podwójnym zasilaniu (DFIG) podłączonej do sieci. Stojan DFIG jest bezpośrednio podłączony do sieci. W niniejszym artykule przedstawiono nieliniowy regulator dla maszyny indukcyjnej z podwójnym zasilaniem (DFIM). Sterownik nieliniowy został zaprojektowany na podstawie techniki sterowania linearyzacją wejścia-wyjścia, która zapewnia dobrą wydajność i dynamikę maszyny w porównaniu z pośrednią metodą sterowania wektorowego. W artykule omówiono zasady działania schematu generowania mocy czynnej i biernej. Wyniki symulacji pokazują, że sprawdzone sterowanie linearyzacją wejścia-wyjścia zapewnia doskonałe śledzenie generowanej mocy czynnej i biernej oraz jest odporne na zmiany mocy czynnej i biernej.
Rocznik
Strony
42--48
Opis fizyczny
Bibliogr. 15 poz., rys.
Twórcy
  • ICEPS Laboratory, phd student Sciences Faculty, Electrical Engineering Department, Djillali Liabes University of Sidi Bel Abbes 22000, Algeria
  • ICEPS Laboratory, Sciences Faculty, Electrical Engineering Department, Djillali Liabes University of Sidi Bel Abbes 22000, Algeria
  • IRECOM Laboratory, Sciences Faculty, Electrical Engineering Department, Djillali Liabes University of Sidi Bel Abbes 22000, Algeria
Bibliografia
  • [1] S. Drid et A. Makouf, « The Doubly Fed Induction Generator Robust Vector Control Based on Lyapunov Method », p. 14.
  • [2] C. Ahlem, B. A, D. I, et B. Barkati, « Comparative study of two control strategies proportional integral and fuzzy logic for the control of a doubly fed induction generator dedicated to a wind application », IJPEDS, vol. 11, no 1, p. 263, mars 2020, doi: 10.11591/ijpeds.v11.i1.pp263-274.
  • [3] R. AISSOU et T. REKIOUA, « Linearizing control input-output of a wind turbine permanent magnet synchronous ». Laboratory of Industrial Technology and the Information «LT2I»,Faculty of Technology, University A. Mira, Targa Ouzemour, Bejaia, Algeria, 2014.
  • [4] A. Bentaallah, A. Massoum, F. Benhamida, et A. Meroufel, « Adaptive Feedback Linearization Control for Asynchronous Machine with Nonlinear for Natural Dynamic Complete Observer », Journal of Electrical Engineering, vol. 63, no 2, janv. 2012, doi: 10.2478/v10187-012-0013-y.
  • [5] F. Z. Belaimeche, A. Bentaallah, S. Massoum, et P. Wira, « A comparative study between a simplified fuzzy PI and classic PI input-output linearizing controller for the wind-urbine doubly fed induction generator », p. 7.
  • [6] L. Zhang, X. Cai, et J. Guo, « Simplified Input-Output Linearizing and Decoupling Control of Wind Turbine Driven Doubly-Fed Induction Generators ». Wind Power Research Center Shanghai Jiaotong University.
  • [7] R. Cheikh, A. Menacer, S. Drid, et M. Tiar, « Application of fuzzy logic control algorithm as stator power controller of a grid-connected doubly-fed induction generator », Front. Energy, vol. 7, no 1, p. 49
  • [8] N. AKKARI, « CONTRIBUTION A L’AMELIORATION DE LA ROBUSTESSE DE LA COMMANDE D’UNE MACHINE ASYNCHRONE A DOUBLE ALIMENTATION ». L’Université de Batna, 2 juin 2010.
  • [9] F. Z. BELAIMECHE, « Contribution à la commande d’une machine asynchrone à double alimentation (MADA) dédié à l’énergie renouvelable. » UNIVERSITE DJILLALI LIABES DE SIDI-BEL-ABBES Faculté de Génie Electrique Département d’Electrotechnique.
  • [10] A. Farrokh Payam, M. Naser Hashemnia, et J. Faiz, « Robust DTC Control of Doubly-Fed Induction Machines Based on Input-Output Feedback Linearization Using Recurrent Neural Networks ». Center of Excellence on Applied Electromagnetic Systems, University of Tehran, Tehran, Iran † Department of Electrical Engineering, Sharif University of Technology, Tehran, Iran, 11 mai 2012.
  • [11] I. GRICHE et A. GHERBI, « Field-oriented control of DFIG in Wind Turbine ». Department of Electrical Engineering Bouira University, Algeria;Laboratory of Automatics, Department of Electrotechnics, Setif1 University, Algeria.
  • [12] J. Soltani et A. Farrokh Payam, « A Robust Adaptive Sliding-Mode Controller for Slip Power Recovery Induction Machine Drives ». IRANIAN JOURNAL OF ELECTRICAL AND COMPUTER ENGINEERING, VOL. 6, NO. 2, SUMMER-FALL 2007.
  • [13] Y. Djeriri et H. Mesai Ahmed, « Robust nonlinear control of wind turbine driven doubly fed induction generators ». Laboratoire ICEPS, Université DjillaliLiabès BP 98 Sidi-BelAbbès, Algérie, 2 juin 2020.
  • [14] A. Farrokh Payam, « An Adaptive Input-Output Feedback Linearization Controller for Doubly-Fed Induction Machine Drives ». SERBIAN JOURNAL OF ELECTRICAL ENGINEERING Vol. 5, No. 1, May 2008, 139-154.
  • [15] A. Hinda, M. Khiat, et Z. Boudjema, « Advanced control scheme of a unifiedpower flow controller using sliding mode control », IJPEDS, vol. 11, no2, p. 625, juin 2020, doi: 10.11591/ijpeds.v11.i2.pp625-633.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ce18c340-00a4-44bf-b349-c5df651dc761
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.