EVA/zinc oxide nanocomposites for active food packaging : selected physical, and microbial properties

Majeed, Haza Satar; Al-Juboory, Farah Khalaf Hammoud; Hamid, Raghad Ali; Zawawi, Ruzniza Mohd

doi:10.14314/polimery.2023.3.1

Artykuł - szczegóły

Tytuł artykułu

EVA/zinc oxide nanocomposites for active food packaging : selected physical, and microbial properties

Autorzy

Majeed Haza Satar , Al-Juboory Farah Khalaf Hammoud , Hamid Raghad Ali , Zawawi Ruzniza Mohd

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.14314/polimery.2023.3.1

Warianty tytułu

Nanokompozyty EVA/tlenek cynku do aktywnych opakowań do żywności : wybrane właściwości fizyczne i mikrobiologiczne

Języki publikacji

Abstrakty

The melt-mixing method was used to obtain nanocomposites of poly(ethylene-co-vinyl acetate) (EVA) with 1, 3 or 5 wt% of hydrophilic zinc oxide (ZnO) nanoparticles. The contact angle, barrier and antimicrobial properties of the obtained composites were investigated. The nanocomposites were characterized by better hydrophilic and barrier properties, as evidenced by, respectively, a smaller contact angle and lower water vapor permeability and water absorption compared to EVA, which can be explained by the formation of hydrogen bonds between EVA and ZnO. In addition, the composites were characterized by greater bactericidal activity against E. coli and S. aureus. The optimal physical and microbial properties were obtained with 3 wt% ZnO content.

Metodą mieszania w stanie stopionym otrzymano nanokompozyty kopolimeru etylen-octan winylu (EVA) z dodatkiem 1, 3 lub 5% mas. hydrofilowych nanocząstek tlenku cynku (ZnO). Zbadano kąt zwilżania, właściwości barierowe i przeciwdrobnoustrojowe otrzymanych kompozytów. Nanokompozyty charakteryzowały się lepszymi właściwości hydrofilowymi i barierowymi, o czym świadczy, odpowiednio, mniejszy kąt zwilżania oraz mniejsza przepuszczalność pary wodnej i absorp¬cja wody w porównaniu z EVA, co można wyjaśnić tworzeniem się wiązań wodorowych pomiędzy EVA i ZnO. Ponadto kompozyty miały większą aktywność bakteriobójczą wobec E. coli i S. aureus. Optymalny zespół właściwości uzyskano przy 3% mas. zawartości ZnO.

Słowa kluczowe

ZnO nanoparticles ethylene vinyl acetate copolymer barrier properties

nanocząstki ZnO kopolimer etylen-octan winylu właściwości barierowe

Wydawca

Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej

Czasopismo

Polimery

Rocznik

2023

Tom

Vol. 68, nr 3

Strony

135--141

Opis fizyczny

Bibliogr. 46 poz., wykr.

Twórcy

autor

Majeed Haza Satar

hazasatarmajeed@gmail.com

Department of Chemistry, College of Education for pure science, University of Kirkuk, Iraq

https://orcid.org/0000-0002-2293-9583

autor

Al-Juboory Farah Khalaf Hammoud

Kirkuk university/College of science/chemistry department

https://orcid.org/0000-0002-3845-226X

autor

Hamid Raghad Ali

Department of Chemistry, College of Education for pure science, University of Kirkuk, Iraq
Department of Chemistry, Faculty of Science, University Putra Malaysia, Serdang 43400, Malaysia

https://orcid.org/0000-0003-1156-1586

autor

Zawawi Ruzniza Mohd

Department of Chemistry, Faculty of Science, University Putra Malaysia, Serdang 43400, Malaysia

https://orcid.org/0000-0003-1714-9605

Bibliografia

[1] Ding H., Fu TJ.: Journal of Food Science 2013, 78. https://doi.org/10.1111/1750-3841.12064
[2] Mihindukulasuriya SDF., Lim LT.: Trends in Food Science and Technology 2014, 40, 149. https://doi.org/10.1016/j.tifs.2014.09.009
[3] Rivero S., García MA., Pinotti A.: Journal of Materials Physics and Chemistry 2013, 1, 51. https://doi.org/10.12691/jmpc-1-3-5
[4] Peacock A.: https://www.taylorfrancis.com/books/mono/10.1201/9781482295467/ handbook-polyethylene-andrew-peacock (accessed 19 Jan 2023).
[5] Reyes J.D.: Celanese Corporation, TX, USA 2014, 1–6.
[6] FINK JK.: (accessed 19 Jan 2023).
[7] Marchante V., Benavente V., Marcilla A. et al.: Journal of Applied Polymer Science 2013, 130, 2987–2994. https://doi.org/10.1002/app.39422
[8] Wilson R., Plivelic TS., Aprem AS. et al.: Journal of Applied Polymer Science 2012, 123, 3806–3818. https://doi.org/10.1002/app.34966
[9] George J., Bhowmick A.K.: Journal of Applied Polymer Science 2008, 43, 702. https://doi.org/10.1007/s10853-007-2193-6
[10] Gabriel M., Antônio J., Pierre B. et al.: Journal of Applied Polymer Science B 2011, 1. https://doi.org/10.17265/2161-6221/2011.09.016
[11] Lin H., Tzeng S., Hsiau P. et al.: Nanostructured Mater 1998, 10, 465. https://doi.org/10.1016/S0965-9773(98)00087-7
[12] Curri M., Comparelli R., Cozzoli P. et al.: Materials Science and Engineering C 2003, 23, 285. https://doi.org/10.1016/S0928-4931(02)00250-3
[13] Zhang L., Jiang Y., Ding Y. et al.: Journal of Nanoparticle Research 2007, 9, 479. https://doi.org/10.1007/s11051-006-9150-1
[14] Oh J., Lim S., Ahn S. et al.: Journal of Physics D 2013, 46. https://doi.org/10.1088/0022-3727/46/28/285101.
[15] Hameed K., Salmiaton A., Mohamad H. et al.: Bulletin of Chemical Reaction Engineering and Catalysis 2017, 12, 81.
[16] Albalushi M.Y., Abdulkreem-Alsultan G., Asikin-Mijan N. et al.: Catalysts 2022, 12, 1537.
[17] Alsultan A.G., Asikin Mijan N., Mansir N. et al.: ACS Omega 2021, 6, 408.
[18] Aziz N., Yunus R., Hamid H. et al.: Sci Rep 2020, 10, 1.
[19] Alsultan A.G., Asikin-Mijan N., Ibrahim Z. et al.: Catalysts 2021, 11, 1261.
[20] Abdulkareem-Alsultan G., Asikin-Mijan N., Taufiq-Yap YH.: Engineering Materials 2016, 75.
[21] Abdulkareem Ghassan A., Mijan N., Hin Taufiq-Yap Y.: Nanorods and Nanocomposites 2020. https://doi.org/10.5772/intechopen.84550
[22] Shobhana G., Asikin-Mijan N., AbdulKareem-Alsultan G. et al.: Biomass and Bioenergy 2020, 141, 105714.
[23] Abdulkareem-Alsultan G., Asikin-Mijan N., Lee H.V. et al.: Innovations in Sustainable Energy and Cleaner Environment. Green Energy and Technology. Springer Singapore 2020, pp 489–504.
[24] Albazzaz A. S., GhassanAlsultan A., Ali S. et al.: Journal of Energy, Environmental and Chemical Engineering 2018, 3(3), 40.
[25] Lim S.T., Sethupathi S., Alsultan A.G. et al.: Energy and Fuels 2021, 35, 16212.
[26] Abdulkareem-Alsultan G., Asikin-Mijan N., Obeas L.K. et al.: Chemical Engineering Journal 2022, 429, 132206.
[27] Asikin-Mijan N., Sidek H.M., Alsultan A.G. et al.: Catalysts 2021, 11. https://doi.org/10.3390/catal11121470
[28] Shah I., Adnan R., Alsultan A.G. et al.: Journal of Dispersion Science and Technology 2020, 0, 1–16.
[29] Alsultan A., Asikin-Mijan N., Obeas L. et al.: Catalysts 2022, 12, 566.
[30] Mansir N., Mohd Sidek H., Teo S.H. et al.: Bioresource Technology Reports 2022, 17, 100988.
[31] Adzahar N.A., Asikin-Mijan N., Saiman M.I. et al.: RSC Advances 2022, 12, 16903.
[32] Alsultan A.G., Mijan N. A., Mastuli M.S et al.: Fuel 2022, 325, 124917.
[33] Wondi M.H., Shamsudin R., Yunus R. et al.: Journal of Food Process Engineering 2020, 43, doi:10.1111/jfpe.13426.
[34] Abdulkareem-Alsultan G., Asikin-Mijan N., Taufiq-Yap Y.H.: Green Energy and Technology. Springer Science and Business Media Deutschland GmbH 2021, pp 505–522.
[35] Ravindran M.X.Y., Asikin-Mijan N., Ong H.C. et al.: Journal of Analytical and Applied Pyrolysis 2022, 168. https://doi.org/10.1016/j.jaap.2022.105772
[36] Razali S. Z., Yunus R., Kania D. et al.: Journal of Materials Research and Technology 2022, 21, 2891.
[37] Abdulkareem-Alsultan G., Asikin-Mijan N., Kareem O.L. et al.: Product Technology Prop App 2023, doi:10.5772/intechopen.104984.
[38] Asikin-Mijan N., Derawi D., Salih N. et al.: Innovations in Thermochemical Technologies for Biofuel Processing 2022, 197.
[39] Abdulkareem-Alsultan G., Asikin-Mijan N., Lee H.V. et al.: Catalysts 2019, 9, 1.
[40] Shafrin E.G., Zisman W.A.: The Journal of Physical Chemistry A 1960, 64, 519. https://doi.org/10.1021/j100834a002
[41] Qing Y., Zheng Y., Hu C. et al.: Applied Surface Science 2013, 285, 583. https://doi.org/10.1016/j.apsusc.2013.08.097
[42] Siracusa V., Rocculi P., Romani S. et al.: Trends in Food Science and Technology 2008, 19, 634. https://doi.org/10.1016/j.tifs.2008.07.003
[43] Shafiee M., Ramazani S.A.: Macromolecular Symposia 2008, 274, 1. https://doi.org/10.1002/masy.200851401
[44] Alakrach A.M, Noriman N.Z, Dahham O.S. et al.: IOP Conference Series: Materials Science and Engineering 2019, 557. https://doi.org/10.1088/1757-899X/557/1/012067
[45] Laycock B., Halley P., Pratt S. et al.: Progress in Polymer Science 2014, 39, 397. https://doi.org/10.1016/j.progpolymsci.2013.06.008
[46] Tam K.H., Djurišić A.B., Chan C.M.N. et al.: Thin Solid Films 2008, 516, 6167. https://doi.org/10.1016/j.tsf.2007.11.081

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-cd49bf7c-f9aa-4562-885a-e8724f42457e