Experimental studies for bearings degradation monitoring at an early stage using analysis of variance

• Autorzy: Zarour D. , Meziani S. , Thomas M.

Identyfikatory

DOI

10.29354/diag/94985

• Języki publikacji: EN

Abstrakty

EN

This work presents a procedure for bearing degradation monitoring at an early stage. The analysis of variance (ANOVA) coupled with Tukey’s test is used to single out the suitable parameters to follow the fault size evolution ranging from 50 µm to 150µm. The Tukey's criterion is adopted in this case to study the ability of time and frequency indicators. The rotational speed, centrifugal load and fault size are considered as independent variables while the time and frequency indicators are taken as dependent variables. The experiments are performed on bearings having a fault on outer race. Based on the results of this study, the Kurtosis and Skewness show a good ability to assess the evolution of degradation in the bearings at an early stage. The paper discusses the weakness of the time and frequency indicators.

Słowa kluczowe

EN

ANOVA; DOE; time descriptors; bearing fault

PL

ANOVA; DOE; analiza wariancji; łożysko; usterka; deskryptory czasu

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2018
• Tom: Vol. 19, No. 4
• Strony: 81--87
• Opis fizyczny: Bibliogr. 27 poz., rys., tab.

Twórcy

autor

Zarour D.

• Laboratoire de Mécanique, Université des Frères Mentouri - Constantine 1, 25000, Constantine, Algeria
• Department of Mechanical Engineering, Ecole de Technologie Supérieur, 1100, Notre-Dame street West, Montreal, H3C 1K3, Quebec, Canada

autor

Meziani S.

• Laboratoire de Mécanique, Université des Frères Mentouri - Constantine 1, 25000, Constantine, Algeria

autor

Thomas M.

• Department of Mechanical Engineering, Ecole de Technologie Supérieur, 1100, Notre-Dame street West, Montreal, H3C 1K3, Quebec, Canada

Bibliografia

• 1. Thomas M., Fiabilité, maintenance prédictive et vibrations de machines. Presses de l’Université du Québec 2011; 633: D335.
• 2. Bazovsky. Reliability Theory and practice, PrenticeHall, Englwood Cliffs, Nj 1961.
• 3. Jones RM. A guide to the interpretation of machinery vibration measurements, Sound and Vibration, 1994; 28(9): 12-20.
• 4. Tandon N, Choudhury A. A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings, Journal of Tribology International, 1999; 32: 469-480.
• 5. Randall RB, Antoni J. Rolling element bearing diagnostics, Mechanical Systems and Signal Processing. 2011; 25: 485-520.
• 6. Sassi S, Badri B, Thomas M. Tracking surface degradation of ball bearings by means of new time domain scalar descriptors, International journal of COMADEM, 2008;11 (3): 36-45.
• 7. Badri B, Thomas M, Sassi S. The envelop Shock detector: a new method to detect impulsive signals, International journal of COMADEM, 2012;15(3) :29-38.
• 8. El Badaoui M. Contribution of vibratory diagnostic of gearbox by Cepstral analysis, Ph.D. thesis, Jean Monnet University of St Etienne (FR), 1999: 141.
• 9. Berry J. How to track rolling bearing health with vibration signature analysis, Sound and Vibration. 1991: 24-35.
• 10. De Priego J.C.M. The relationship between vibration spectra and spike energy spectra for an electric motor bearing defect, Vibrations. 2001; 17(1):3-5.
• 11. Altmann J, Mathew J. Multiple band-pass autoregressive demodulation for rolling-element bearing fault diagnosis, Mechanical Systems and Signal Processing. 2001; 15(5):963-977.
• 12. Kedadouche M, Thomas M, Tahan A. Monitoring bearing defects by using a method combining EMD, MED and TKEO. Advances in Acoustics and Vibration. Hindawi Publishing Corporation, 2014, ID 502080, 10. http://dx.doi.org/10.1155/2014/592080
• 13. Kedadouche M, Thomas M, Tahan A. Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects. Mechanics & Industry, 2014; 5(6): 467-476. https://doi.org/10.1051/meca/2014061
• 14. Antoni J, Bonnardot F, Raada A, El Badaoui M. Cyclostationary modelling of rotating machine vibration signals, Mechanical Systems and Signal Processing. 2004; 18(6):1285-1314.
• 15. Safizadeh M.S, Lakis AA, Thomas M. Timefrequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 2002;5(2):41-56.
• 16. Braun S, Feldman M. Time-frequency characteristics of non-linear systems. Mechanical Systems and Signal Processing. 1997; 11(4):611-620.
• 17. Safizadeh MS, Lakis AA, Thomas M. Using Short Time Fourier Transform in Machinery Fault Diagnosis, International Journal of Condition Monitoring and Diagnosis Engineering Management (COMADEM), 2000;3(1): 5-16.
• 18. Tse P, Peng YH, Yam R. Wavelet analysis and envelope detection for rolling element bearing fault diagnosis-their effectiveness and flexibility, Transactions of the ASME, Journal of Vibration and Acoustics. 2001; 123(3):303-310.
• 19. Antoni J, Randall RB. The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines, Mechanical Systems and Signal Processing. 2006;20:308-331.
• 20. Batista L, Badri B, Sabourin R, Thomas M. A classifier fusion system for bearing fault diagnosis, expert systems with applications. Elsevier. 2013;40 (17):6788-6797.
• 21. Gonsalez CG, da Silva S, Brennan MJ. Structural damage detection in an aeronautical panel using analysis of variance. Mechanical Systems and Signal Processing. 2015;52-53:06-216. https://doi.org/10.1016/j.ymssp.2014.04.015
• 22. Aouici H, Yallese MA, Fnides B, Chaoui K, Mabrouki T. Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness. Journal of Mechanical Science and Technology. 2011;25(11): 2843-2851.
• 23. Ram Prabhu T. Effects of solid lubricants, load, and sliding speed on the tribological behavior of silica reinforced composites using design of experiments. Materials and Design. 2015; 77:149-160. https://doi.org/10.1016/j.matdes.2015.03.059
• 24. Hochberg Y, Tamhane AC. Multiple comparison procedures. Willey, Canada, 1987.
• 25. Conover WJ. Practical nonparametric statistics, Wiley, New York, 1980.
• 26. Lilliefors HW. On the Kolmogorov-Smirnov test for normality with mean and variance un-known. Journal of the American Statistical Association. 1967; 62: 399-402.
• 27. Hogg RV, Ledolter J. Engineering statistics. Mac Millan Publishing Company, Universidad de Michigan, 1987.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).