PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

An efficient fault tolerant control scheme for Euler-Lagrange systems

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Every closed-loop system holds a level of fault tolerance, which could be increased by using a fault tolerant control (FTC) scheme. In this paper, an efficient FTC scheme for a class of nonlinear systems (Euler-Lagrange ones) is proposed, which guarantees high performance and stability in a faulty system. This scheme was designed on the basis of a cascade control structure in which the inner loop is the closed-loop system and the external loop is the FTC, a generalized proportional integral (GPI) observer-based controller, which manages the fault tolerance level increment. An important issue of the proposed scheme is that the GPI observer-based controller jointly estimates disturbances and faults, providing information about the state of health of the system, and then compensates their effect. The scheme is efficient because only the inertia matrix is required for the controller design, it is able to preserve the nominal control law unchanged and can operate properly without explicit information about system faults (fault diagnostic module). Simulation results, on a pendulum model, show the effectiveness of the proposed scheme for tracking control.
Rocznik
Strony
219--228
Opis fizyczny
Bibliogr. 20 poz., rys., tab., wykr.
Twórcy
  • Faculty of Electrical and Mechanical Engineering, Autonomous University of Nuevo Leon, Av. Universidad S/N, San Nicolas de los Garza, N.L., 66455, Mexico
  • Faculty of Electrical and Mechanical Engineering, Autonomous University of Nuevo Leon, Av. Universidad S/N, San Nicolas de los Garza, N.L., 66455, Mexico
Bibliografia
  • [1] Acosta-Santana, P., Rodriguez-Alfaro, L. and Alcorta-Garcia, E. (2013). A cascade structure approach to control reconfiguration, Conference on Control and Fault-Tolerant Systems (SysTol), Nice, France, pp. 347-352.
  • [2] Blanke, M., Kinnaert, M., Lunze, J., Staroswiecki, M. and Schröder, J. (2016). Diagnosis and Fault-Tolerant Control, Springer, Berlin/Heidelberg.
  • [3] Bolton, W. (2021). Instrumentation and Control Systems, 3rd Edn, Newnes, Oxford.
  • [4] Cieslak, J., Henry, D. and Zolghadri, A. (2010). Fault tolerant flight control: From theory to piloted flight simulator experiments, IET Control Theory & Applications 4(8): 1451-1464.
  • [5] Cieslak, J., Henry, D., Zolghadri, A. and Goupil, P. (2008). Development of an active fault-tolerant flight control strategy, Journal of Guidance, Control, and Dynamics 31(1): 135-147.
  • [6] Flores-Flores, J.P. and Martinez-Guerra, R. (2019). PI observer design for a class of nondifferentially flat systems, International Journal of Applied Mathematics and Computer Science 29(4): 655-665, DOI: 10.2478/amcs-2019-0048.
  • [7] Gao, Z., Cecati, C. and Ding, S.X. (2015). A survey of fault diagnosis and fault-tolerant techniques. Part I: Fault diagnosis with model-based and signal-based approaches, IEEE Transactions on Industrial Electronics 62(6): 3757-3767, DOI: 10.1109/TIE.2015.2417501.
  • [8] Gutiérrez Giles, A., Arteaga Pérez, M.A. and Sira Ramírez, H. (2016). Force control of robot manipulators based on generalized proportional integral observers, Ibero-American Journal of Automation and Industrial Computing 13(2): 238-246.
  • [9] Hamayun, M.T., Edwards, C., Alwi, H. and Bajodah, A. (2015). A fault tolerant direct control allocation scheme with integral sliding modes, International Journal of Applied Mathematics and Computer Science 25(1): 93-102, DOI: 10.1515/amcs-2015-0007.
  • [10] Kailath, T. (1980). Linear Systems, Prentice-Hall, Englewood Cliffs.
  • [11] Kelly, R. and Santibáñez, V. (2003). Control de movimiento de robots manipuladores, Pearson, Madrid.
  • [12] Krokavec, D., Filasová, A. and Liščinský, P. (2016). LMI-based design of cascade reconfiguration control structures, 3rd Conference on Control and Fault-Tolerant Systems (Sys-Tol), Barcelona, Spain, pp. 605-610.
  • [13] Li, S.,Wang, H., Aitouche, A., Tian, Y. and Christov, N. (2018). Active fault tolerance control of a wind turbine system using an unknown input observer with an actuator fault, International Journal of Applied Mathematics and Computer Science 28(1): 69-81, DOI: 10.2478/amcs-2018-0005.
  • [14] Ortega, R., Perez, J.A.L., Nicklasson, P.J. and Sira-Ramirez, H.J. (2013). Passivity-based Control of Euler-Lagrange Systems: Mechanical, Electrical and Electromechanical Applications, Springer, London.
  • [15] Rodriguez-Alfaro, L., Alcorta-Garcia, E. and Espinosa-Pérez, G. (2013). A cascade approach for fault-tolerant active control in MSIP, National Congress of Automatic Control 2013, Ensenada, Baja California, Mexico, pp. 245-250.
  • [16] Salazar, J.C., Sanjuan G´omez, A., Nejjari Akhi-Elarab, F. and Sarrate Estruch, R. (2020). Health-aware and fault-tolerant control of an octorotor UAV system based on actuator reliability, International Journal of Applied Mathematics and Computer Science 30(1): 47-59, DOI: 10.34768/amcs-2020-0004.
  • [17] Sira-Ramírez, H., Luviano-Juárez, A., Ramírez-Neria, M. and Zurita-Bustamante, E.W. (2018). Active Disturbance Rejection Control of Dynamic Systems: A Flatness Based Approach, Butterworth-Heinemann, Oxford.
  • [18] Sira-Ramírez, H., Ramírez-Neria, M. and Rodríguez-Angeles, A. (2010). On the linear control of nonlinear mechanical systems, 49th IEEE Conference on Decision and Control (CDC), Atlanta, USA, pp. 1999-2004.
  • [19] Van der Schaft, A.J. (2000). L2-Gain and Passivity Techniques in Nonlinear Control, Vol. 2, Springer, London.
  • [20] Yu, X. and Jiang, J. (2015). A survey of fault-tolerant controllers based on safety-related issues, Annual Reviews in Control 39: 46-57.
Uwagi
PL
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cd237651-c735-4c39-ad77-62ca400bdf9e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.