Investigation of iron selectivity behavior of copper smelter slag flotation tailing with hematitization baking and base metals leaching methods

• Autorzy: Kart Elif Uzun , Yazğan Zeynep Hazal , Gümüşsoy Aleyna

Identyfikatory

DOI

10.37190/ppmp/141947

• Języki publikacji: EN

Abstrakty

EN

In this study, iron selectivity behaviour of copper smelter slag (CSS) flotation tailings (38.08% Fe, 0.35% Cu, 4.48% Zn, 0.16% Co, 0.37% S) having fayalite and magnetite as major minerals was investigated with hematitization baking and base metals leaching methods using mineralogical and chemical analyses. For selectivity of iron, it was baked at temperatures of 650-690-700-710-730°C. The aim of the baking is to transform the almost all of the iron in the fayalite into the oxidized (non-soluble) form and the base metals into the sulphated (soluble) form. The temperature that had the lowest hematitization rate of iron was found to be 650°C, and the highest temperature was found to be 730°C. To examine the dissolution behaviour of baked CSS flotation tailing was leached at 50°C at a 1/10 (w/v) for 1 hour by using water. After baking at 690°C calcine and leaching residue, S values were determinated to be approximately 17% and 9%, respectively. Baking made at 700⁰C, amount of sulfate also decreased to 10% and S content was measured as 4% of its leaching residue. As a result of this study, 690⁰C/700⁰C was determined as optimum conditions of hematitization baking and base metals were extracted selectively when the iron was remained at leaching residue in Fe2O3 phase. It was determined that, hematitization is high and the sulphates of the base metals are preserved at 700⁰C temperature. The fayalite phase completely decomposed into Si-O/Fe-O/Zn-S-O/Co-S-O compounds at 700⁰C baking which was the highest iron selective and base metals dissolute temperature.

Słowa kluczowe

EN

iron selectivity; hematitization baking; copper smelter slag flotation tailing; base metal leaching

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Physicochemical Problems of Mineral Processing
• Rocznik: 2021
• Tom: Vol. 57, iss. 5
• Strony: 164--175
• Opis fizyczny: Bibliogr. 35 poz., rys. kolor.

Twórcy

autor

Kart Elif Uzun

• Marmara University, Technology Faculty, Department of Metallurgy and Materials Engineering

autor

Yazğan Zeynep Hazal

• Marmara University, Technology Faculty, Department of Metallurgy and Materials Engineering

autor

Gümüşsoy Aleyna

• Marmara University, Technology Faculty, Department of Metallurgy and Materials Engineering

Bibliografia

• AATACH, M., KADIYSKI, M., STOILOV, V., VISARIEV, E., GAYDARDZHIEV, S., 2020. Characterisation and recovery of non-ferrous metals met in a copper-slag processed by flotation. October, 18–22.
• ALTUNDOGAN, H. S., TÜMEN, F., 1997. Metal recovery from copper converter slag by roasting with ferric sulphate. Hydrometallurgy. 44(96).
• ARSLAN, C., ARSLAN, F., 2002. Recovery of copper, cobalt, and zinc from copper smelter and converter slags. Hydrometallurgy. 67(1–3), 1–7.
• CURLOOK, W., PAPANGELAKIS, V. G., BAGHALHA, M., 2004. Pressure acid leaching of non-ferrous smelter slags for the recovery of their base metal values. Pressure Hydrometallurgy 2004.
• DIMITRIJEVIC, M. D., UROSEVIC, D. M., JANKOVIC, Z. D., MILIC, S. M., 2016. Recovery of copper from smelting slag by sulphation roasting and water leaching. Physicochemical Problems of Mineral Processing. 52(1), 409–421.
• D’YACHENKO, A. N., KRAIDENKO, R. I., PORYVAI, E. B., CHEGRINTSEV, S. N., 2013. Breakdown of coppersmelting slags with ammonium chloride. Russian Journal of Non-Ferrous Metals. 54(6), 425–428.
• GORAI, B., JANA, R. K., PREMCHAND., 2003. Characteristics and utilisation of copper slag - A review. Resources, Conservation and Recycling. 39(4), 299–313.
• GUO, X., LI, D., PARK, K. H., TIAN, Q., WU, Z., 2009. Leaching behaviour of metals from a limonitic nickel laterite using a sulfation-roasting-leaching process. Hydrometallurgy. 99(3–4), 144–150.
• HAMAMCI, C., ZIYADANĞULLARI, B., 1991. Effect of Roasting with Ammonium Sulfate and Sulfuric Acid on the Extraction of Copper and Cobalt from Copper Converter Slag. Separation Science and Technology. 26(8), 1147–1154.
• HAMMERSCHMIDT, J., WROBEL, M., 2009. Decomposition of metal sulfates – A SO2 -source for sulfiric acid production. The Southern African Institute of Mining and Metallurgy, Sulphur and Sulphiric Acid Conference.
• HUANG, F., LIAO, Y., ZHOU, J., WANG, Y., LI, H., 2015. Selective recovery of valuable metals from nickel converter slag at elevated temperature with sulfuric acid solution. Separation and Purification Technology. 156, 572–581.
• KONGOLO, K., MWEMA, M. D., BANZA, A. N., GOCK, E., 2003. Cobalt and zinc recovery from copper sulphate solution by solvent extraction. Minerals Engineering. 16(12), 1371–1374.
• LI, Y., LIU, H., PENG, B., MIN, X., HU, M., PENG, N., YUANG, Y., LEI, J., 2015. Study on separating of zinc and iron from zinc leaching residues by roasting with ammonium sulphate. Hydrometallurgy. 158, 42–48.
• LI, Y., PAPANGELAKIS, V. G., PEREDERIY, I., 2009. High pressure oxidative acid leaching of nickel smelter slag: Characterization of feed and residue. Hydrometallurgy. 97(3–4), 185–193.
• LI, Z., CHANÉAC, C., BERGER, G., DELAUNAY, S., GRAFF, A., LEFÈVRE, G., 2019. Mechanism and kinetics of magnetite oxidation under hydrothermal conditions. RSC Advances. 9(58), 33633–33642.
• MUSSAPYROVA, L., NADIROV, R., BALÁŽ, P., RAJNÁK, M., BUREŠ, R., BALÁŽ, M., 2021. Selective roomtemperature leaching of copper from mechanically activated copper smelter slag. Journal of Materials Research and Technology. 12, 2011–2025.
• NADIROV, R. K., SYZDYKOVA, L. I., ZHUSSUPOVA, A. K., USSERBAEV, M. T., 2013. Recovery of value metals from copper smelter slag by ammonium chloride treatment. International Journal of Mineral Processing. 124, 145–149.
• ROY, S., DATTA, A., REHANI, S., 2015. Flotation of copper sulphide from copper smelter slag using multiple collectors and their mixtures. International Journal of Mineral Processing. 143, 43–49.
• SANTASALO-AARNIO, A., GALFI, I., VIRTANEN, J., GASIK, M. M., 2017. New analytical methodology for analysing S (IV) species at low pH solutions by one stage titration method (bichromatometry) with a clear colour change. Could potentially replace the state-of-art-method iodometry at low pH analysis due higher accuracy. PLoS ONE. 12(11), 1–15.
• SARFO, P., DAS, A., WYSS, G., YOUNG, C., 2017. Recovery of metal values from copper slag and reuse of residua secondary slag. Waste Management. 70, 272–281.
• SHEN, H., FORSSBERG, E., 2003. An overview of recovery of metals from slags. Waste Management. 23(10), 933– 949.
• SIBANDA, V., SIPUNGA, E., DANHA, G., MAMVURA, T. A., 2020. Enhancing the flotation recovery of copper minerals in smelter slags from Namibia prior to disposal. Heliyon. 6(1), e03135.
• SITHOLE, P., GOSO, X. C., LAGENDIJK, H., 2017. Laboratory-scale sulphation roasting testwork for copper and cobalt production. Journal of the Southern African Institute of Mining and Metallurgy. 117, 485-496.
• SUKLA, L. B., PANDA, S. C., JENA, P. K., 1986. Recovery of cobalt, nickel and copper from converter slag through roasting with ammonium sulphate and sulphuric acid. Hydrometallurgy. 16(2), 153–165.
• SUN, Q., CHENG, H., MEI, X., LIU, Y., LI, G., XU, Q., LU, X., 2020. Efficient Synchronous Extraction of Nickel, Copper, and Cobalt from Low–Nickel Matte by Sulfation Roasting‒Water Leaching Process. Scientific Reports. 10(1), 1–14.
• TAGAWA, H., 1984. Thermal decomposition temperatures of metal sulfates. Thermochimica Acta. 80(1), 23–33.
• TANG, Y., ZHANG, B., XIE, H., QU, X., XING, P., YIN, H., 2020. Recovery and regeneration of lithium cobalt oxide from spent lithium-ion batteries through a low-temperature ammonium sulfate roasting approach. Journal of Power Sources. 474, 228596.
• TÜMEN, F., BAILEY, N.T., 1990. Recovery of metal values from copper smelter slags by roasting with pyrite. Hydrometallurgy. 25, 317–328.
• UZUN, E., ZENGİN, M., ATILGAN, İ., 2016. Improvement of selective copper extraction from a heat-treated chalcopyrite concentrate with atmospheric sulphuric-acid leaching. Materiali in Tehnologije. 50(3), 395-401.
• UZUN KART, E., 2021. Evaluation of sulphation baking and autogenous leaching behaviour of Turkish metallurgical slag flotation tailings. Physicochemical Problems of Mineral Processing. 57(4), 107–116.
• WEI, X., VIADERO, R. C., BUZBY, K. M., 2005. Recovery of Iron and Aluminum from Acid Mine Drainage by Selective Precipitation. Environmental Engineering Science. 22(6), 745-755.
• WILLIAMS, M. L., 1996. CRC Handbook of Chemistry and Physics, 76th edition. Occupational and Environmental Medicine. 53(7), 504–504.
• YANG, Z., RUI-LIN, M., WANG-DONG, N., HUI, W., 2010. Selective leaching of base metals from copper smelter slag. Hydrometallurgy. 103(1–4), 25–29.
• ZANDER, M., FRIEDRICH, B., DEGEL, R., KLEINSCHMIDT, G., HOPPE, M., SCHMIDL, J., AURUBIS, A. G., 2011. Improving copper recovery from production slags by advanced stirring methods. Proceedings of EMC. 10-17.
• ZHANG, H., HU, C., GAO, W., LU, M., 2020. Recovery of iron from copper slag using coal-based direct reduction: Reduction characteristics and kinetics. Minerals. 10(11), 1–17.