PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Study of the dynamic stability of the belt conveyor adaptive drive

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Badanie stabilności dynamicznej napędu adaptacyjnego przenośnika taśmowego
Języki publikacji
EN
Abstrakty
EN
Dynamic stability of the adaptive hydraulic drive of the belt conveyor is studied with the help of an improved mathematical model constructed taking into account the physical processes that occur during the mechanical system of the conveyor under load changes. The parameters of the adaptive drive, which provide stable operation of the mechanical system in conditions of its overload, are determined.
PL
Dynamiczna stabilność adaptacyjnego napędu hydraulicznego przenośnika taśmowego jest badana za pomocą ulepszonego modelu matematycznego skonstruowanego z uwzględnieniem fizycznych procesów zachodzących podczas mechanicznego systemu przenośnika pod zmianą obciążenia. Określono parametry napędu adaptacyjnego, zapewniające stabilną pracę układu mechanicznego w warunkach jego przeciążenia.
Rocznik
Strony
98--103
Opis fizyczny
Bibliog. 34 poz., rys.
Twórcy
  • Vinnytsia National Technical University, Khmelnytske shose 95, Vinnytsia, 21021, Ukraine
  • Vinnytsia National Technical University, Khmelnytske shose 95, Vinnytsia, 21021, Ukraine
  • Vinnytsia National Technical University, Khmelnytske shose 95, Vinnytsia, 21021, Ukraine
  • Ternopil Volodymyr Hnatiuk National Pedagogical University
  • Vinnytsia National Technical University, 95 Khmelnytske Shose Str., 21021 Vinnytsia, Ukraine
  • Lublin University of Technology, Institute of Electronics and Information Technology, Nadbystrzycka 38A, 20618 Lublin, Poland
  • L.N. Gumilyov Eurasian National University (ENU), Astana, Kazakhstan
  • L.N. Gumilyov Eurasian National University (ENU), Astana, Kazakhstan
Bibliografia
  • [1] Shakhmeuster, L.K.; Dmitriev, V.G. Theory and calculation of belt conveyors, M.: Machinebuilding. Publishing House (1978)., 392
  • [2] Polishchuk, L.K.; Iskovych-Lototskiy, R.D.; Kotsubivskiy, R.P. Hydrofication of transport facilities of clamp formers, Vibrations in engineering and technologies: All-Ukrainian ScientificEngineering Journal, 5 (2003), n 31, 28–30
  • [3] Zaika, V.T., Razumny, Yu. T., Prokud, V. N. Influence of the regulated drive on cargo flows and energy efficiency of the system of mine conveyor transport, Scientific herald of the National Mining University, 3 (2015), 82–88
  • [4] Wheeler, C. A. Evolutionary Belt Conveyor Design — Optimizing Coasts, Bulk Material Handling by Conveyor Belt. , Littleton, Colorado, (2008) 108. http://hdl.handle.net/1959.13/44796
  • [5] Bing, X.; Ruqi, D.; Junhui, Z.; Min, C.; Tong, S. Pump valves coordinate control of the independent metering system for mobile machinery, Automation in Construction, (2015), 98–11. http://dx.doi.org/10.1016/j.autcon.2015.04.012
  • [6] Polishchuk, L.K., Adler, O.O. Built-in hydraulic drive of conveyor with flexible traction organ, sensitive to load change, Vinnytsia: VNTU, (2010), 184
  • [7] Forental, V.; Forental, M.; Nazarov, F. Investigation of Dynamic Characteristics of the Hydraulic Drive with Proportional Control. Procedia Engineering. International Conference on Industrial Engineering (ICIE-2015), 129 (2015), 695–701. http://dx.doi.org/10.1016/j.proeng.2015.12.093
  • [8] Kotlobai, A.Ya., Kotlobay, A.A., Tamelo, V.F. Hydraulic assemblies of drive systems for running equipment of roadbuilding machines. Minsk, Science and Technology, 15 (2016), n. 1, 69–77
  • [9] Cheng, G., Shuangxia, P. Adaptive sliding mode control of electro-hydraulic system with nonlinear unknown parameters, Control Engineering Practice, (2008), 1275–1284. doi: 10.1016/j.conengprac.2008.02.002
  • [10] Burennikov, Y., Kozlov, L., Pyliavets, V., Piontkevych, O. Mechatronic hydraulic drive with regulator, based on artificial neural network, IOP Conference Series: Materials Science and Engineering, 209 (2017), n. 1, 012071. https://doi.org/10.1088/1757-899X/209/1/012071
  • [11] Popov, D.N. Textbook for university students on the specialty "Hydraulic machines, hydraulic drives and hydropneumoautomatics". Moscow. Mechanical engineering, (1991), 384
  • [12] Skjong, S., Pedersen, E. Model-based control designs for offshore hydraulic winch systems, Ocean Engineering, 121 (2016), 224–238. https://doi.org/10.1016/j.oceaneng.2016.05. 036
  • [13] Chentouf, B., Smaoui, N. Stability analysis and numerical simulations of a one dimensional open channel hydraulic system, Applied Mathematics and Computation, 321 (2018), 498-511. https://doi.org/10.1016/j.amc.2017.10.058
  • [14] Liu, P., Hou, D., Kuang, B., Yang, Y. 1-D dynamic stability analysis of mixed-spectrum supercritical water reactor core, Annals of Nuclear Energy, 101 (2017), 278-292. https://doi.org/10.1016/j.anucene.2016.11.014
  • [15] Halanay, A., Safta, C. A., Ursu, F., Ursu, I. Stability analysis for a nonlinear model of a hydraulic servomechanism in a servoelastic framework, Nonlinear Analysis: Real World Applications, 10 (2009), n. 2, 1197-1209. https://doi.org/10.1016/j.nonrwa.2007.12.009
  • [16] Saleh, A. I., Hasan, M. M., Darwish, N. M. The Mikhailov Stability Criterion Revisited. Journal of Engineering Sciences, Published by Faculty of Engineering-Assiut University-Egypt, 38 (2010), n.1, 195-207
  • [17] Busłowicz, M. Stability analysis of linear continuous-time fractional systems of commensurate order. Journal of Automation Mobile Robotics and Intelligent Systems, 3 (2009), 12-17
  • [18] Lakatos, B. G., Sapundzhiev, T. J., Garside, J. Stability and dynamics of isothermal CMSMPR crystallizers. Chemical Engineering Science, 62 (2007), n.16, 4348-4364. https://doi.org/10.1016/j.ces.2007.04.028
  • [19] Guo, W., Yang, J., Wang, M., Lai, X. Nonlinear modeling and stability analysis of hydro-turbine governing system with sloping ceiling tailrace tunnel under load disturbance, Energy Conversion and Management, 106 (2015), 127-138. https://doi.org/10.1016/j.enconman.2015.09.026
  • [20] Gong, R. Z., Wang, H. J., Liu, Q. Z., Shu, L. F., Li, F. C. Numerical simulation and rotor dynamic stability analysis on a large hydraulic turbine. Computers & Fluids, 88 (2013), 11-18. https://doi.org/10.1016/j.compfluid.2013.08.014
  • [21] Wang, L., Book, W. J., Huggins, J. D. A hydraulic circuit for single rod cylinders, Journal of Dynamic Systems, Measurement and Control, 134 (2012), n.1, 011019. doi:10.1115/1.4004777
  • [22] O'Neill, L. E., Mudawar, I., Hasan, M. M., Nahra, H. K., Balasubramaniam, R., Hall, N. R., Mackey, J. R. Experimental investigation into the impact of density wave oscillations on flow boiling system dynamic behavior and stability, International Journal of Heat and Mass Transfer, 120 (2018), 144-166. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.011
  • [23] Chang, S., Meng, Q., Liang, Y. Experimental study of hydraulic stability for variable water volume air conditioning System, Procedia Engineering, 205 (2017), 1072-1078. https://doi.org/10.1016/j.proeng.2017.10.172
  • [24] Polishchuk, L., Kharchenko, Ye., Piontkevych, O., Koval, O., The research of the dynamic processes of control system of hydraulic drive of belt conveyors with variable cargo flows, Eastern-European Journal of Enterprise Technologies, 2 (2016), n. 8(80), 22-29. https://doi.org/10.15587/17294061.2016.65930
  • [25] Polishchuk, L., Koval, O. Mathematical modeling of dynamic processes of control device of hydraulic drive of belt conveyor with variable load, Tehnomus. New Technologies and Products in Machine Manufacturing Technologies, 1 (2015), 141-147
  • [26] Polishchuk, L. K., Piontkevych, O. V. Dynamics of adaptive drive of mobile machine belt conveyor, Kaunas University of Technology, 22nd International Scientific Conference «MECHANIKA 2017», 19 May 2017, (2017), 307–311.
  • [27] Kukharchuk, V.V., Kazyv, S.S., Bykovsky, S.A., Discrete wavelet transformation in spectral analysis of vibration processes at hydropower units, Przeglad Elektrotechniczny 93 (5) (2017), 65-68.
  • [28] Vasyl V. Kukharchuk, Valerii F. Hraniak, Yurii G. Vedmitskyi, Volodymyr V. Bogachuk, and etc. "Noncontact method of temperature measurement based on the phenomenon of the luminophor temperature decreasing", Proc. SPIE 10031, 100312F (28 September 2016).
  • [29] Azarov O.D., Dudnyk O.V., Kaduk O.V., Smolarz A., Burlibay A., "Method of correcting of the tracking ADC with weight redundancy conversion characteristic", Proc. SPIE 9816, Optical Fibers and Their Applications 2015, 98161V (17 December 2015).
  • [30] Osadchuk V.S., Osadchuk A.V. The Microelectronic Radiomeasuring Transducers of Magnetic Field with a Frequency Output, Electronics and Electrical Engineering. – Kaunas: Technologija, 4 (110) (2011), 67-70.
  • [31] Osadchuk V.S., Osadchuk A.V. The magneticreactive effect in transistors for construction transducers of magnetic field, Electronics and Electrical Engineering. – Kaunas: Technologija 109 (2011), 119-122.
  • [32] Vasilevskyi, O.M. Metrological characteristics of the torque measurement of electric motors, International Journal of Metrology and Quality Engineering, 8, art. no. 7, (2017). DOI: 10.1051/ijmqe/2017005
  • [33] Vasilevskyi, O.M., Kulakov, P.I., Ovchynnykov, K.V., Didych, V.M. Evaluation of dynamic measurement uncertainty in the time domain in the application to high speed rotating machinery, International Journal of Metrology and Quality Engineering, 8, art. no. 25, (2017). DOI: 10.1051/ijmqe/2017019.
  • [34] Auguściński A., Minorowicz B., Modelowanie i badania symulacyjne hydraulicznego układu zapewnienia stateczności pojazdu. Informatyka Automatyka i Pomiary w Gospodarce i Ochronie Środowiska IAPGOŚ 2(3)/2012, 32–35.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ccd59490-5367-4a19-a6f0-358902f95c9c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.