The influence of abrasive finishing conditions on the surface texture of Inconel 939 elements made using the 3D printing LPBF method

• Autorzy: Wojtiuk Ewa , Radziejewska Joanna , Marczak Michał

Identyfikatory

DOI

10.26628/simp.wtr.v96.1180.34-40

• Języki publikacji: EN

Abstrakty

EN

The article presents research on finishing treatment applied to components made of Inconel through 3D printing by Laser Powder Bed Fusion method. Vibration-abrasive machining was carried out using a supporting fluid and various shapes of abrasive. The effects of the processing conditions were analysed based on the surface roughness of the samples and mass loss. The obtained collective results were subjected to comparative analysis with the effects of vibratory-abrasive processing without the use of a processing fluid, as presented in the article. The research has shown that using vibration-abrasive processing, it is possible to reduce the height of surface irregularities by more than three times after four hours of treatment. The intensity of processing was the highest in the first hour of the process. The lowest roughness heights Ra = 1.8 μm were obtained using ceramic balls in the presence of a supporting fluid.

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Welding Technology Review
• Rocznik: 2024
• Tom: R. 96
• Strony: 34--40
• Opis fizyczny: Bibliogr. 20 poz., il., tab.

Twórcy

autor

Wojtiuk Ewa

• Warsaw University of Technology

• https://orcid.org/0009-0005-9610-7092

autor

Radziejewska Joanna

• Warsaw University of Technology

• https://orcid.org/0000-0002-2175-7542

autor

Marczak Michał

• Warsaw University of Technology

• https://orcid.org/0000-0003-1056-8604

Bibliografia

• 1. Shaikh, A.S.; Rashidi, M.; Minet-Lallemand, K.; Hryha, E. On as-built microstructure and necessity of solution treatment in additively manufactured Inconel 939. Powder Metall. 2023, 66, 3-11, doi:10.1080/00325899.2022.2041787
• 2. Diniță, A.; Neacșa, A.; Portoacă, A.I.; Tănase, M.; Ilinca, C.N.; Ramadan, I.N. Additive Manufacturing Post-Processing Treatments, a Review with Emphasis on Mechanical Characteristics. Materials (Basel). 2023, 16, 4610, doi:10.3390/ma16134610
• 3. Hosseini, E.; Popovich, V.A. A review of mechanical properties of additively manufactured Inconel 718. Addit. Manuf. 2019, 30, 100877, doi:10.1016/j.addma.2019.100877
• 4. González, M.A.; Martínez, D.I.; Pérez, A.; Guajardo, H.; Garza, A. Microstructural response to heat affected zone cracking of prewelding heat-treated Inconel 939 superalloy. Mater. Charact. 2011, 62, 1116-1123, doi:10.1016/j.matchar.2011.09.006
• 5. Kanagarajah, P.; Brenne, F.; Niendorf, T.; Maier, H.J. Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading. Mater. Sci. Eng. A 2013, 588, 188-195, doi:10.1016/j.msea.2013.09.025
• 6. Shaikh, A.S. Development of a γ’ Precipitation Hardening Ni-Base Superalloy for Additive Manufacturing, Chalmers University of Technology, 2018
• 7. Li, X.; Shi, J.J.; Wang, C.H.; Cao, G.H.; Russell, A.M.; Zhou, Z.J.; Li, C.P.; Chen, G.F. Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting. J. Alloys Compd. 2018, 764, 639-649, doi:10.1016/j.jallcom.2018.06.112
• 8. Liu, P.; Hu, J.; Sun, S.; Feng, K.; Zhang, Y.; Cao, M. Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment. J. Manuf. Process. 2019, 39, 226-232, doi:10.1016/j.jmapro.2019.02.029
• 9. Lesyk, D.A.; Martinez, S.; Mordyuk, B.N.; Dzhemelinskyi, V. V.; Lamikiz; Prokopenko, G.I. Post-processing of the Inconel 718 alloy parts fabricated by selective laser melting: Effects of mechanical surface treatments on surface topography, porosity, hardness and residual stress. Surf. Coatings Technol. 2020, 381, 125136, doi:10.1016/j.surfcoat.2019.125136
• 10. Duda, T.; L. Venkat, R. 3D Metal Printing Technology. In Proceedings of the IFAC Papers Online Conference Paper Archive, 49-29; 2016; pp. 103–110
• 11. Serjouei, A.; Libura, T.; Brodecki, A.; Radziejewska, J.; Broniszewska, P.; Pawłowski, P.; Szymczak, T.; Bodaghi, M.; Kowalewski, Z.L. Strength-hardness relationship for AlSi10Mg alloy produced by laser powder bed fusion: An experimental study. Mater. Sci. Eng. A 2022, doi:10.1016/j.msea.2022.144345
• 12. Bańkowski, D.; Spadło, S. The influence of abrasive paste on the effects of vibratory machining of brass. Arch. Foundry Eng. 2019, 19, 5-10, doi:10.24425/afe.2019.129622
• 13. Kamarudin, K.; Wahab, M.S.; Shayfull, Z.; Ahmed, A.; Raus, A.A. Dimensional Accuracy and Surface Roughness Analysis for AlSi10Mg Produced by Selective Laser Melting (SLM). In Proceedings of the MATEC Web of Conferences; 2016; p. 01077
• 14. Tian, Y.; Tomus, D.; Rometsch, P.; Wu, X. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting. Addit. Manuf. 2017, 13, 103-112, doi:10.1016/j.addma.2016.10.010
• 15. Han, X.; Zhu, H.; Nie, X.; Wang, G.; Zeng, X. Investigation on selective laser melting AlSi10Mg cellular lattice strut: Molten pool morphology, surface roughness and dimensional accuracy. Materials (Basel). 2018, 11, 392, doi:10.3390/ma11030392
• 16. Damian, B.; Daniel, K.; Piotr, M. Deburring and Smoothing the Edges Using Vibro-abrasive Machining. Procedia Eng. 2017, 192, 28-33, doi:10.1016/j.proeng.2017.06.005
• 17. Boschetto, A.; Bottini, L.; Macera, L.; Veniali, F. Post-processing of complex SLM parts by barrel finishing. Appl. Sci. 2020, 10, 1382, doi:10.3390/app10041382
• 18. Radziejewska, J.; Marczak, M.; Maj, P.; Głowacki, D. The Influence of Vibro-Assisted Abrasive Processing on the Surface Roughness and Sub-Surface Microstructure of Inconel 939 Specimen Made by LPBF. Materials (Basel). 2023, 16, 7429, doi:10.3390/ma16237429
• 19. Woźniak, K. Obróbka powierzchni w wygładzarkach pojemnikowych; 2017; ISBN 978-83-01-19205-1
• 20. Metal Solutions: EOS Nickel Alloy IN939 Material Data Sheet Metal Solutions Available online: https://www.eos.info/05-datasheetimages/Assets_MDS_Metal/EOS_NickelAlloy_IN939/Material_DataSheet_EOS_NickelAlloy_IN939_en.pdf