PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A New Grounded Current Controlled Inductor Based on Simplified Current Conveyors

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper, a new active grounded inductor controlled in current is described. This structure is realized using negative second generation current controlled conveyors and a single grounded capacitor, with no external resistance. The proposed circuit offers many advantages, such as: operation at high frequencies, simple circuit, tuning by the bias current, low power dissipation, etc. Comparison between this topology and those presented in literature is done to highlight the benefits of our structure. As an application, a bandpass filter based on the proposed active inductance is constructed to confirm the usability of the circuit and illustrate these performances. The filter center frequency and quality factor can be tuned independently. Simulation results, given under PSPICE software, present good agreement with the theoretical ones.
Twórcy
autor
  • STRS Laboratory, INPT, Rabat, Morocco
autor
  • STRS Laboratory, INPT, Rabat, Morocco
autor
  • QUARTZ Laboratory, ENSEA, Cergy-Pontoise Cedex, France
Bibliografia
  • [1] M. Sagbas, “Component reduced floating ±L, ±C and ±R simulators with grounded passive components,” International Journal of Electronics and Communications (AEU), vol. 65, no. 10, pp. 794-798, 2011.
  • [2] M. O. Çiçekoğlu, “Active simulation of grounded inductors with CCII+s and grounded passive elements,” International Journal of Electronics, vol. 85, no. 4, pp. 455-462, 1998.
  • [3] F. Kaçar, “New lossless inductance simulators realization using a minimum active and passive components,” Microelectronics Journal, vol. 41, no. 2, pp. 109-113, 2010.
  • [4] E. Yuce, S. Minaei, and O. Çiçekoğlu, “A novel grounded inductor realization using a minimum number of active and passive components,” ETRI Journal, vol. 27, no. 4, pp. 427-432, 2005.
  • [5] H. Kuntman, M. G¨ulsoy, and O. Çiçekoğlu, “Actively simulated grounded lossy inductors using third generation current conveyors,” Microelectronics Journal, vol. 31, pp. 245-250, 2000.
  • [6] E. Yuce, “Novel lossless and lossy grounded inductor simulators consisting of a canonical number of components,” Analog Integrated Circuits and Signal Processing, vol. 59, pp. 77-82, 2009.
  • [7] M. Sagbas, U. E. Ayten, H. Sedef, and M. Koksal, “Electronically tunable floating inductance simulator,” International Journal of Electronics and Communications (AEU), vol. 63, no. 5, pp. 423-427, 2009.
  • [8] D. Prasad, D. R. Bhaskar, and K. L. Pushkar, “Realization of new electronically controllable grounded and floating simulated inductance circuits using voltage differencing differential input buffered amplifiers,” Active and Passive Electronic Components, 2011.
  • [9] E. Yuce, and S. Minaei, “A modified CFOA and its applications to simulated inductors, capacitance multipliers, and analog filters,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 55, no. 1, pp. 266-275, 2008.
  • [10] D. Prasad, D. R. Bhaskar, and A. K. Singh, “New grounded and floating simulated inductance circuits using current differencing transconductance amplifiers,” Radioengineering, vol. 19, no. 1, pp. 194-198, 2010.
  • [11] A. U. Keskin, and E. Hancioglu, “CDBA-based synthetic floating inductance circuits with electronic tuning properties,” ETRI Journal, vol. 27, no. 2, pp. 239-242, 2005.
  • [12] B. Metin, and O. Çiçekoğlu, “A novel floating lossy inductance realization topology with NICs using current conveyors,” IEEE Transactions On Circuits And Systems II: Express Briefs, vol. 53, no. 6, pp. 483-486, 2006.
  • [13] PV. A. Mohan, “Grounded capacitor based grounded and floating inductance simulation using current conveyors,” Electronics letters, vol. 34, no. 11, pp. 1037-1038, 1998.
  • [14] E. Yuce, “Grounded inductor simulators with improved low frequency performances,” IEEE Transactions on Instrumentation and Measurement, vol. 57, no. 5, pp. 1079-1084, 2008.
  • [15] A. Fabre, O. Saaid, F. Wiest, and C. Boucheron, “Low power current mode second order bandpass IF filter,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 44, no. 6, pp. 436-446, 1997.
  • [16] F. Kaçar, and A. Yeşil, “Novel grounded parallel inductance simulators realization using a minimum number of active and passive components,” Microelectronics Journal, vol. 41, no. 10, pp. 632-638, 2010.
  • [17] C. Psychalinos, and A. Spanidou, “Current amplifier based grounded and floating inductance simulators,” International Journal of Electronics and Communications (AEU), vol. 60, no. 2, pp. 168-171, 2006.
  • [18] F. Kaçar, and H. Kuntman, “CFOA-based lossless and lossy inductance simulators,” Radioengineering, vol. 20, no. 3, pp. 627-631, 2011.
  • [19] I. Myderrizi, S. Minaei, and E. Yuce, “DXCCII-based grounded inductance simulators and filter applications,” Microelectronics Journal, vol. 42, no. 9, pp. 1074-1081, 2011.
  • [20] E. Yuce,“Inductor implementation using a canonical number of active and passive elements,” International Journal of Electronics, vol. 94, no. 4, pp. 317-326, 2007.
  • [21] STMicroelectronics, “0.35 m SiGe BiCMOS”, Grenoble (France), 1994.
  • [22] M. Alami, A. Fabre, A. Jaadoud, and A. Touhami, “Simplified BiCMOS current controlled conveyor,” in Proc. of 14th IEEE International Conference on Electronics, Circuits and Systems (ICECS), 2007, pp. 383-386.
  • [23] Z. M'harzi, M. Alami, and F. Temcamani, “Improvement of current mode controlled amplifier using current conveyors,” in Proc. of WCSIT, 2014, pp. 2-4.3
  • ,
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cc520686-0ea7-4665-b1f9-ad135e9f14e3
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.