Archives of Metallurgy and Materials - Tom Vol. 65, iss. 3 (2020) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 65, iss. 3

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Rocznik

2020

Identyfikatory

Zawartość wolumenu

Vol. 65, iss. 3
- artykuł: Effect of Glass-Coated Al Paste on Back-Surface Field Formation in Si Solar Cells (Jeong Hyeondeok, Ryu Sung-Soo), s. 989--992
- artykuł: Control of Nd-Fe-B Morphology as Function of the PVP Concentration Using Electrospinning Process (Eom Nu Si A., Haq Muhammad Aneeq, Lee Jimin, Lim Kyoung Mook, Kim Taek-Soo, Choa Yong-Ho, Kim Bum Sung), s. 993--996
- artykuł: Gas Atomization Parametric Study on the VIGA-CC Based Synthesis of Titanium Powder (Kim Dae-Kyeom, Kim Young-Il, Lee Hwaseon, Kim Young Do, Lee Dongju, Lee Bin, Kim Taek-Soo), s. 997--1000
- artykuł: Effect of Composition on Strain-Induced Martensite Transformation of FeMnNiC Alloys Fabricated by Powder Metallurgy (Choi Seunggyu, Jeon Junhyub, Seo Namhyuk, Moon Young Hoon, Shon In-Jin, Lee Seok-Jae), s. 1001--1004
- artykuł: Microstructural and Mechanical Characteristics of Non-Equiatomic High Entropy Alloy FeMnCoCr Prepared by Spark Plasma Sintering (Seo Namhyuk, Jeon Junhyub, Choi Seunggyu, Moon Young Hoon, Shon In-Jin, Lee Seok-Jae), s. 1005--1009
- artykuł: Electrothermal Properties and RF Transmittance of Spray-coated CNT Thin Film for Radome De-icing Application (Jung Jun Hyuk, Hong Jiwon, Kim Youngryeul, Yong Seok-Min, Park Jinwoo, Lee Seung Jun), s. 1011--1014
- artykuł: Degradation Characterization and Mechanisms of Warm Rolled Mg-1.6Gd with 95% Reduction Ratio for Biodegradable Implant Applications (Zakiyuddin Ahmad, Irawan Arya Abietta, Susanti Oknovia, Harjanto Sri), s. 1015--1018
- artykuł: Effect of Al/Cu Weight Fraction on the Mechanical and Electrical Properties of Al-Cu Conductors for Overhead Transmission Lines (Han Deokhyun, Kim Geon-Hong, Kim Jaesung, Ahn Byungmin), s. 1019--1022
- artykuł: Effect of Fabrication Method of Fe-TiB2 Nanocomposite Powders on Spark-Plasma Sintering Behavior (Bae Sun-Woo, Huynh Xuan-Khoa, Kim Ji-Soon), s. 1023--1028
- artykuł: Effect of Fe Content on the Mechanical Properties and Thermal Conductivity of the Al-RE Alloys (Yoo Hyo-Sang, Kim Yong-Ho, Son Hyeon-Taek), s. 1029--1033
- artykuł: Fabrication of U-10wt.%Zr-RE Fuel Slugs by Recycling of Metallic Fuel Scraps (Kim Ki-Hwan, Mun Seung-Uk, Ha Seong-Jun, Kuk Seoung-Woo, Park Jeong-Yong), s. 1035--1039
- artykuł: Electrical Characteristics of Tin Oxide Films Grown by Thermal Atomic Layer Deposition (Yoon Seong Yu, Choi Byung Joon), s. 1041--1044
- artykuł: Effects of Si Addition on Microstructure and Mechanical Properties of the Al Alloys with High Cr Content Prepared by Gas Atomization and SPS Processes (Kim Yong-Ho, Oh Ik-Hyun, Yoo Hyo-Sang, Park Hyun-Kuk, Lee Jung-Han, Son Hyeon-Taek), s. 1045--1049
- artykuł: Investigation of CO2 Capture Property of CaO Sorbent in Various Molten Chloride Media with Different Operation Temperature (Kim Sung-Wook, Jeon Min Ku, Lee Kirak), s. 1051--1055
- artykuł: Die Attachment Method on a Cu Finish by Pressure-Assisted Sinter Bonding in Air Using Cu Formate Paste (Jo Kyeong Hwan, Lee Jong-Hyun), s. 1057--1061
- artykuł: Dynamic Charge Carrier Transport Behaviors in Zirconium Oxide for Nuclear Cladding Materials (Park Il-Kyu, Lee Sang-Seok, Mok Yong Kyoon, Jeon Chan-Woo, Kim Hyun-Gil), s. 1063--1067
- artykuł: Buildability of Mortar Feedstock in Material Extrusion Additive Manufacturing (Park Jinsoo, Lee Hojae, Choi Hanshin), s. 1069--1072
- artykuł: Effect of Post-Heat Treatment on the Wear Properties of AlSi10Mg Alloy Manufactured by Selective Laser Melting (Park Tae-Hyun, Baek Min-Seok, Sohn Yongho, Lee Kee-Ahn), s. 1073--1080
- artykuł: Fabrication and Compressive Properties of Open-Cell Ni-Mo-Cr (Hastelloy) Foams Manufactured by Electrostatic Powder Spraying (Kang Tae-Hoon, Kim Kyu-Sik, Lee Min-Jeong, Yun Jung-Yeul, Lee Kee-Ahn), s. 1081--1086
- artykuł: Effect of High Frequency Heat Treatment on the Microstructure and Macroscopic Properties of WC-50Ni+Stellite 1 Coating Layer Fabricated by HVOF Spray Process (Ham Gi-Su, Wi Dong-Yeol, Park Sun-Hong, Lee Kee-Ahn), s. 1087--1092
- artykuł: Fabrication and Evaluation of AA6061/AA5052/AA6061/AA5052 Multi-Layer Complex Sheet by Cold-Roll Bonding Process (Lee Seong-Hee), s. 1093--1097
- artykuł: Master Curve Model for Characterization of Decomposition and Densification Behavior of PbAlNbO3-PbZrTiO3 Ceramics (Han Jun Sae, Park Jae Man, Park Seong Jin), s. 1099--1103
- artykuł: Influence of Spark Plasma Sintering Temperature on Microstructure and Tthermoelectric Properties of Cu-Doped Bi0.5Sb1.495Te3 Compound (Lee Chul-Hee, Dharmaiah Peyala, Song Jun-Woo, Jeong Kwang-Yong, Hong Soon-Jik), s. 1105--1110
- artykuł: Effect of Pyrolysis Conditions on the Physicochemical Properties of Graphitic Carbon Nitride for Visible-Light-Driven Photocatalytic Degradation (Kim Jeong Hyun, Ji Myeongjun, Ryu Cheol-Hui, Lee Young-In), s. 1111--1116
- artykuł: Dilatometric Analysis of the Sintering Behavior of Bi2Te3 Thermoelectric Powders (Han Ju-Yeon, Byun Jong Min, Lee Young-In, Choi Byung Joon, Kim Hogyoung, Oh Sung-Tag), s. 1117--1120
- artykuł: The Effect of Extrusion in the Complex Strain State on the Microstructure and Mechanical Properties of MgAlZn Magnesium Alloys (Bednarczyk I., Kuc D., Tomaszewska A., Tkocz M.), s. 1121--1128
- artykuł: The Effect of Transition Metals on Quasicrystalline Phase Formation in Mechanically Alloyed Al65Cu20Fe15 Powder (Mitka M., Kalita D., Góral A., Lityńska-Dobrzyńska L.), s. 1129--1133
- artykuł: Kinetic Studies of Pt(IV) Chloride Complex Ions Reduction Reaction Using Potassium Formate (Wojnicki M., Żabiński P., Csapó Edit), s. 1135--1140
- artykuł: Corrosion Resistance of Nitrogen-Doped DLC Coatings Produced in Glow Discharge Conditions on Nitrided Austenitic Steel (Borowski T., Spychalski M., Rożniatowski K., Kulikowski K.), s. 1141--1146
- artykuł: Electron Beam Processing of SensorsRelevant Vacoflux-49 Alloy: Experimental Studies of Thermal Zones and Microstructure (Kumar Pawan, Yadav Anshul, Kumar Arvind), s. 1147--1156
- artykuł: Processing and Characterization of Fe-Cu-Ni Sinters Prepared by Ball Milling and Hot Pressing (Borowiecka-Jamrozek J.), s. 1157--1161
- artykuł: Properties and Microstructure of Laser Welded Dissimilar Joints of TP347-HFG and S235JR Steels with Additional Material (Danielewski H., Skrzypczyk A., Mulczyk K., Zrak A.), s. 1163--1170
- artykuł: An Investigation on Divorced Eutectoid Growth of Cementite in Eutectoid Steel (Biswas Prasenjit, Maity Joydeep), s. 1171--1176
- artykuł: Modelling of Dielectric Properties of BiNbO4-Based Microwave Ceramics (Czekaj D., Lisińska-Czekaj A., Garbarz-Glos B., Bąk W.), s. 1177--1181
- artykuł: Technology and Dielectric Properties of the KNLN Doped with Nd3+ and Pr3+ Ions (Bochenek D., Osińska K., Mankiewicz M., Niemiec P., Dercz G.), s. 1183--1188
- artykuł: Influence of Calcium Ions on the Structure and Properties of LaMnO3 (Bara M., Dzik J., Feliksik K., Kozielski L., Wodecka-Duś B., Goryczka T., Zarycka A., Adamczyk-Habrajska M.), s. 1189--1195
- artykuł: Effect of Carbon Content on the Microstructure and Properties of Ti-6Al-4V Alloy (Szkliniarz A., Szkliniarz W.), s. 1197--1204
- artykuł: Effect of Welding Parameters and Metal Arrangement of the AA2024-T3 on the Quality and Strength of FSW Lap Joints for Joining Elements of Landing Gear Beam (Myśłiwiec P., Śliwa R. E., Ostrowski R., Bujny M., Zwolak M.), s. 1203--1216
- artykuł: Dual Pore Cathode Materials for Solid Oxide Fuel Cells (Mosiałek M., Zimowska M., Kharitonov D., Górski M., Krzan M., Komenda A.), s. 1217--1221
- artykuł: Influence of the Electrochemical Anodizing Parameters on the Microstructure, Microroughness and Microhardness of Anodized Ti-6Al-7Nb (Veselinov Deyan, Skulev Hristo), s. 1223--1226
- artykuł: The Influence of Alloying Additions on High Temperature Interaction Between Molten Compacted Graphite Iron and Alumina (Sobczak N., Bacior M., Turalska P., Bruzda G., Homa M., Sobczak J. J.), s. 1227--1238

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.