Preparation Process of Coating Interlayer and the Performance of EH40/2205-Clad Plate with Interlayer

• Autorzy: Feng K.K. , Yi Yali , Qin Y. , Jin Herong R.

Identyfikatory

DOI

10.24425/amm.2023.142439

• Języki publikacji: EN

Abstrakty

EN

This study aimed to investigate the effect of different coating processes on interlayer coating using ProCAST software and identify the preferred coating process so as to prepare an EH40/2205 composite plate with a coating interlayer of Ni-5 Fe-15 Co (wt.%) displaying good performance. The preparation and characterization tests were conducted to analyze the interlayer coating, the diffusion of elements at the bonding interface and the mechanical properties of the hot-rolled composite plate. The results showed that the coating rate increased linearly with an increase in the initial coating temperature, pressure difference and the width ratio of the suction layer. The interlayer coating was complete under the guidance of optimized process parameters, and the test results and simulations confirmed each other. The coated interlayer successfully blocked the diffusion of elements between the bonding surfaces. The tensile strength of the rolled composite plate was 580 MPa, which met the needs of the project. The tensile shear fracture occurred at EH40, which proved that the plate was well bonded.

Słowa kluczowe

EN

element diffusion; interlayer coating; mechanical properties; numerical simulation; stainless steel-clad plate

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 2
• Strony: 591--598
• Opis fizyczny: Bibliogr. 15 poz., fot., rys., tab.

Twórcy

autor

Feng K.K.

• Yanshan University, School of Mechanical Engineering, Qinhuangdao, China

• https://orcid.org/0000-0001-9217-2253

autor

Yi Yali

• Yanshan University, School of Mechanical Engineering, Qinhuangdao, China

• https://orcid.org/0000-0001-8123-4172

autor

Qin Y.

• Yanshan University, School of Mechanical Engineering, Qinhuangdao, China

• https://orcid.org/0000-0003-4594-7655

autor

Jin Herong R.

• Yanshan University, Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of National Education, Qinhuangdao, China
• Yanshan University, Parallel Robot and Mechatronic System Laboratory of Hebei Province, Qinhuangdao, China

• https://orcid.org/0000-0001-5904-3433

Bibliografia

• [1] Rao. Sarma. Nagarjuna, et al., Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel [J], Materials Science and Technology 25 (11), 1387 (2009).
• [2] K.B. Nie, Z.H. Zhu, Paul Munroe, et al., Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg-Zn-Ca-Mn Magnesium Alloy [J], Acta Metallurgica Sinica (English Letters) 33 (07), 922-936 (2020).
• [3] O. Bouaziz, J.P. Masse, G. Petitgand, et al., A Novel Strong and Ductile TWIP/Martensite Steel Composite [J], Advanced Engineering Materials 18 (1), 56 (2016).
• [4] G.Y. Zu, J.M. Yu, J.L. Wen., Effect of interlayer on interfacial bonding properties of stainless clad sheets [J], Journal of Northeastern University 24 (11), 1053-1056 (2003).
• [5] X. J. Zhang, L. Li, et al., Application of insert layer in manufacturing clad metal plates [J], Steel Rolling 30 (06), 45-49 (2013).
• [6] S. Kundu, S. Chatterjee., Interface microstructure and strength properties of diffusion bonded joints of titanium - Al interlayer 18Cr-8Ni stainless steel [J], Materials Science & Engineering A 527 (10), 2714-2719 (2009).
• [7] Z.A. Luo, G.L. Wang, G.M. Xie, et al., Effect of Nb interlayer on microstructure and property of titanium-stainless steel clad plate bonded by vacuum hot-rolling [J], The Chinese Journal of Nonferrous Metals 23 (12), 3335-3340 (2013).
• [8] M. Balasubramanian., Characterization of diffusion-bonded titanium alloy and 304 stainless steel with Ag as an interlayer [J], The International Journal of Advanced Manufacturing Technology 82 (1-4), 153-162 (2016).
• [9] G.Y. Zu, J.M. Yu, J.L. Wen., Effect of Intermediate Sandwich Material and Shielding Atmosphere on Stainless Steel-Carbon Steel Bonding [J], Journal of Iron and Steel Research (01), 55-58-71 (2005).
• [10] Y.L. Yi, Y.J. Kong, Y.H. Wang, et al., Effect of coating slab preparation on stainless steel/low alloy steel composite interface [J], Iron and Steel 56 (05), 105-112 (2021).
• [11] H.R. Jin, Y.J. Kong, Y. Zhang, et al., Interfacial structure of 316L/EH40 clad plate with iorn-cobalt-nickel alloy as interlayer [J], Iron and Steel 55 (10), 63-68 (2020).
• [12] H.R. Jin, Y. Zhang, Y J. Kong, et al., A vacuum nickel coating device and vacuum nickel coating method between vertical composite billet layers [P], Hebei Province: Cn109930152B, 2020-04-28.
• [13] Z.N. Yang, Z. Zhang, C.W. Guo, et al., Competitive growth of Dendrite Arrays in the Directional Solidification of a Thin Sheet Sample [J], Rare Metal Materials and Engineering 50 (04), 1247-1253 (2021).
• [14] K.K. Li, C.J. Zhang, P.C. Xiao, et al., Analysis on interface fluctuation of steel slag in mold of high casting speed thin slab continuous casting [J], Continuous Casting (01), 9-14+25 (2021).
• [15] H.B. Xie, D.W. Wang, C. Yu, et al., Stainless steel/carbon steel composite plate prepared by hot-roll bonding with pure iron as intermediate material [J], Iron and Steel 52 (12), 48-53 (2017).

Uwagi

This study was funded by the Central Government Guide Local Scientific and Technological Development Fund Project (216Z1003G), and the Joint Fund High-end Iron and Steel Metallurgy for Natural Research Foundation Project of Hebei Province (E2020203033).