Primary Crystallization Studies and Abrasion Analysis of Cr-Ni-Mo Cast Steel

• Autorzy: Studnicki A. , Gromczyk M. , Kondracki M. , Suchoń J. , Szajnar J.

Identyfikatory

DOI

10.1515/afe-2015-0083

• Języki publikacji: EN

Abstrakty

EN

The article shows results of studies of primary crystallization and wear resistance of Cr-Ni-Mo cast steel intended for work in corrosive and abrasive conditions. The studies of primary crystallization were conducted with use of TDA method and modified tester allowing measurement casting cooling time influence on the cooling and crystallization curves of studied alloys. After heat treatment of examined cast steel wear tests of the samples were conducted on pin-on-disc type device.

Słowa kluczowe

EN

chromium cast steel; primary crystallization; wear test; abrasion; pin on disc

PL

staliwo chromowe; krystalizacja pierwotna; badanie zużycia; ścieranie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 4
• Strony: 75--80
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr.

Twórcy

autor

Studnicki A.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Gromczyk M.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Kondracki M.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Suchoń J.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Szajnar J.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

Bibliografia

• [1] Kniaginin, G. (1972). Cast steel. Metallurgy and Founding. Publisher Śląsk, Katowice (in Polish).
• [2] Sakwa, W., Jura, S., Sakwa, J. (1980). Wear resistance iron alloys. Part II Cast steel. Publisher ZG STOP, Kraków (in Polish).
• [3] Dobrzański, L.A. (2004). Metal engineering materials. Publisher WNT Warszawa (in Polish).
• [4] Głownia, J. (2002). Castings from alloy cast steel, application. Publisher Fotobit, Kraków (in Polish).
• [5] Gawroński, J., Szajnar, J., Jura, Z. & Studnicki, A. (2004). The professor Stanislaw Jura the creator of theory and the industrial uses of diagnostics and the wears of metals and alloys. Foundry Archive, Spec. Issue, vol. 4, no. 16, PAN Katowice (in Polish).
• [6] Cholewa, M., Jura, Z., Studnicki, A. (2009). The development of thermal analysis and derivative method in Department of Foundry Silesian University of Technology, Progresses Theory and The Casting practice, Publisher PAN Katowice, 49-70. (in Polish).
• [7] Studnicki, A. (2002). The investigation of crystallization process of casting resistance materials, Foundry Archive, vol. 2, no. 4, PAN Katowice.
• [8] Khvan, A.V., Hallstedt, B. & Broeckmann, C. (2014). A thermodynamic evaluation of the Fe–Cr–C system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46, 24-33.
• [9] Works own Department of Foundry, Faculty of Mechanical Engineering, Silesian University of Technology in Gliwice.