PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Impact of Rapeseed Oil Methyl Esters on Fuel Injection Parameters in a Diesel Engine Equipped with the Common Rail Injection System

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the global fuel economy, new challenges concerning the use of alternative (vegetable) fuels in the internal combustion engines are starting to arise. The important issue is to meet the new limits on four main pollutant emissions from a diesel engines: CO (carbon monoxide), NOx (nitrogen oxides), HC (hydrocarbons) and PM (particulate matter). The design of a modern engine must be characterized by high efficiency, its dynamics of movement and durability. Dynamic development of plant fuels is forced by the new strategy of the global fight against the global warming. For these reasons, it is necessary to do research concerning the effects of the use of biofuels, including methyl esters, higher fatty acids of rapeseed oil for self- ignition engines. The current tests must concern the engines equipped with the latest Common Rail fuel injection systems. In the publication, the above-mentioned issues have been analyzed, and the results of tests of the basic injection process parameters have been presented. The AVL5402 engine was fueled with mixtures of diesel oil with RME ester of rapeseed oil produced by ORLEN Południe S.A. in Trzebinia. The impact of the fuel (v/v) RME content in the mixture with diesel oil on the injection process parameters such as: initial velocity of the injected fuel, critical speed of secondary fuel breakup, critical droplet diameter, microstructure of the fuel stream, droplet Sauter mean diameter, vertical angle of the fuel stream, have been justified. The impact of the fuel (v/v) RME content in the mixture with diesel oil on the above-mentioned parameters has been proved. During the tests, the engine worked on the load characteristics.
Twórcy
  • Faculty of Mechanical Engineering, Kazimierz Pulaski University of Technology and Humanities in Radom, Chrobrego Str. 45, 26-600 Radom, Poland
Bibliografia
  • 1. Abramowicz, G.N. 2003. Theory of turbulent Jets. M.I.T. Press, Cambiridge,
  • 2. Agarwal, A.K., Gupta, J.G., Maurya, R.K., Kim W.I., Lee C.S., Park S. 2016. Spray evolution, engine performance, emissions and combustion characterization of Karanja biodiesel fueled Common Rail turbocharget direct injection transportation engine, International Journal of Engine Research, 17(10), 1092–1107.
  • 3. Agarwal, A.K., Park, S., Dhar, A., Lee, C.S., Park, S., Gupta, T., Gupta, N.K. 2018. Review of experimental and computational studies on spray, combustion, performance, and emission characteristics of biodiesel fueled engines, Journal of Energy Resources Technology, Transactions of the ASME, 140(12), art. no. 120801.
  • 4. Anas, M.I., Khalid, A., Zulkifli, F.H., Hushim M.F., Manshoor, B., Zaman, I. Analysis of the Effect of Injection Pressure on Ignition Delay and Combustion Process of Biodiesel from Palm Oil, Algae and Waste Cooking Oil. Journal of Physics: Conference Series 914(1), 012008
  • 5. Ashkezari, A.Z., Divsalar, K., Malmir, R., Abbaspour,
  • I. 2020. Emission and performance analysis of DI diesel engines fueled by biodiesel blends via CFD simulation of spray combustion and different spray breakup models: a numerical study. Journal of Thermal Analysis and Calorimetry, 139 (4)., 2527–2539.
  • 6. Bai F., Zhang Z., Du Y.,Zhang F., Feng Z. 2017. Effects on Injection Rate Profile on combustion Process and Emissions in a Diesel Engine. Journal of Combustion, 1–8.
  • 7. Bielaczyc, P., Woodbuen, J., Gandyk M. 2016. Trends in automotive emissions, fuels, lubricants, legislation and test metods–a global wiew, with a focus on the EU an US – summary of the 5 th International Exhaust Emissions Symposium (IEES). Combustion Engine 166(3), 78-82.
  • 8. Burgraff, J., Ulrich K. 1995. Die neunen olgehuhlten ECO-Zflanzenolmotoren MF-RTA von DMS. Motortechnische Zeitschrif. 2 (56).
  • 9. Chong, C.T., Ng J., Ahmad, S., Rajoo, S. 2015. Oxygenated palm biodiesel: Ignition, combustion and emissions quantification in a light-duty diesel engine. Energy Conversion and Management, 101, 317–325. DOI:org/10.1016/j.enconman.2015.05.058.
  • 10. Chong, C.T., Chiong, M.C., Ng, J., Lim, M., Tran, M. 2019. Valera-Medina, A., Chong, W.W.F. Oxygenated sunflower biodiesel: Spectroscopic and emission quantification under reacting swirl spray conditions. Energy, 178, 804–813.
  • 11. Elsbett L. 1981. Entwichlung eines Dieselmotors mit warmeolich-terem Verbenungsraum. Motortechnische Zeitschrift, 3.
  • 12. El-Kelawy, M., Bastawissi, H.A.-E., El-Shenawy, E.-S.A., Panchal, H., Sadashivuni, K., Ponnamma, D., Al-Hofy, M., Thakar, N., Walvekar, R. 2019. Experimental investigations on spray flames and emissions analysis of diesel and diesel/biodiesel blends for combustion in oxy-fuel burner. AsiaPacific Journal of Chemical Engineering, 14(6), art. no. e2375.
  • 13. Geng, L., Bi, L., Li, Q., Chen, H., Xie, Y. 2021. Experimental study on spray characteristics, combustion stability, and emission performance of a CRDI diesel engine operated with biodiesel–ethanol blends. Energy Reports, 7, 904–915.
  • 14. Graboski, M.S., McCormick, R.L. 1998. Combustion of fat and vegetable oil derived fuels in diesel engines. Progress in Energy and Combustion Science, 24(2), 125–164. DOI: 10.1016/S03601285(97)00034-8
  • 15. Heywood, J.B. 2018. International Combustion Engine Fundamentals New York, Mc Graw Hil.
  • 16. Hemmerlein, N., Korte V., Richter H., Schroeder G. 1991. Performance Exhaust Emissions and Durability of Modern Diesel Engines Running on Rapeseed Oil. SAE Technical Papers Series, 910848.
  • 17. Lahane, S., Subramanian, K.A. 2015. Effect of different percentages of biodiesel-diesel blends on injection, spray, combustion, performance, and emission characteristics of a diesel engine. Fuel, 139, 537–545.
  • 18. Lee, S., Lee, C.S., Park, S., Gupta, J.G., Maurya, R.K., Agarwal, A.K. 2017. Spray characteristics, engine performance and emissions analysis for Karanja biodiesel and its blends, Energy, 119, 138–151.
  • 19. Longwic, R., Asok, K., Sen, Lotko, W., Górski, K., Litak, G. (2010) Cycle to-Cycle Variatons of the Combustion Process in the Diesel Engine Power by Different Fuels. Zeitschrift für Angewandte Mathematik und Mechanik.
  • 20. Longwic R., Sander P., Nieoczym A., Lotko W. i inni. Effect of some properties of hydrocarbon fuels on self – ignition delay. Przemysł Chemiczny, 96 (5), 2017, 1123–1127.
  • 21. Lotko, W. 2020. Unrepeatability of Fuel Injection and Combustion Processes in the Diesel Engine Fueled with Renewable Fuel. Advances in Science and Technology Reserch Jurnal, 14(4), 67–77.
  • 22. Lotko, W., Górski K., Longwic R. 2010. Nieustalone stany pracy silnika wysokoprężnego zasilanego olejem napędowym z eterem etylo-tert butylowym. WKŁ.
  • 23. Lotko, W., Górski K. 2015. Zasilanie silnika wysokoprężnego mieszaninami ON i EETB. WNT, 2015.
  • 24. Nguyen, T., Pham, M., Anh, T.L. 2020. Spray, combustion, performance and emission characteristics of a common rail diesel engine fueled by fish-oil biodiesel blends, Fuel, 269, art. no. 117108.
  • 25. Patil, V.V., Patil, R.S. 2020. Experimental investigations to predict optimistic biodiesel(s) and its optimistic operating conditions by varying ignition delay period and fuel spray pressures for lower emissions and better performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(19), 3890–3902.
  • 26. Paitrat, E. 1997. Trials Programme on Engines with Rape Methyl Ester (RME) in France. FUELS. 1st International Colloquium. Technische Akademie Esslinger.
  • 27. Raghu, P., Sakthivel, B., Linkesh Kumar, V.V., Pradeep Raj, J., Niranjan Suresh, S. 2019. An optimisation of spray and performance emission characteristic of biodiesel and its blends by varying injection timing in diesel engine. International Journal of Mechanical and Production Engineering Research and Development, 9(3), 165–170
  • 28. Ramirez-Verduscol, P. i in. 2021. Predicting cetane numer, kinematic viscosity, density and higher heating value of biodiesel from its fatty acid methyl ester composition. Fuel 91, 102–111.
  • 29. Sams, T. Use of Biofuels under Real Word Engine Operation. Procedings of 2nd European Motor Biofuels Forum. Graz, Austria 1996.
  • 30. Shen, C., Zhang, S., Hou, J., Chang, W., Lee, C. (2015), The effects of spray angles on soot emissions of diesel and biodiesel engines. ICLASS 2015 13th International Conference on Liquid Atomization and Spray Systems.
  • 31. Sudarmanta, B., Mahanggi, A.A.K., Yuvenda, D., Soebagyo, H. 2020. Optimization of injection pressure and injection timing on fuel sprays, engine performances and emissions on a developed DI 20c biodiesel engine prototype, International Journal of Heat and Technology, 38(4), 827–838.
  • 32. Szlachta,Z.2002.Zasilanie silnikóww ysokoprężnych paliwami rzepakowymi. WKŁ.
  • 33. Alternalive Kraftstoffe, Konzernforschung i Zuzammen-arbeit mit Öfentlichkeitsarbeit. Volkswagen AG. Wolfsburg. Deutschland.
  • 34. Biodiesel. Biodiesel – Tankstellen im Deutschland. 3 Auflange Union Zur Forderung Von Oel-Und Proteinptlanzen. E.V. Deutschland, Bonn, 8/1996
  • 35. Certyficate of Quality no 21TBIO/A/41 Methyl ester of higher fatty acids RME. PKN ORLEN Południe S.A. Polska 04.02.2021
  • 36. Certyficate of Quality no 21TBIO/A/274 Methyl ester of higher fatty acids FAME. PKN ORLEN Południe S.A. Polska 25.08.2020
  • 37. Certyficate of Quality Nr 21BMK/A/321. Polski Koncern Naftowy ORLEN S.A. Płock, 06,02,2021
  • 38. PN-EN 16709+A1:2018-12 Paliwa do pojazdów samochodowych o wysokiej zawartości FAME (B20 i B30) – Wymagania i metody badań.
  • 39. Zasobnikowe układy wtryskowe Common Rail. Bosch, WKŁ, Warszawa. 2005.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cb79bc1a-e881-4474-82c2-77a6e1f4b347
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.