Protection abilities of thin, small-sizes ceramic tiles

• Autorzy: Wiśniewski A. , Dziubak C. , Rak Z. S.
• Języki publikacji: EN

Abstrakty

EN

Different types of monolithic ceramics and ceramic composites, their parameters and the technology of their manufacturing are described. The results of ballistic tests of the small-sizes ceramic protective of RHA against 7,62 mm and 12,7 mm projectiles of B-32 type are presented.

PL

Przedstawiono różne typy ceramiki monolitycznej, ceramiczno-ceramicznych kompozytów, ich parametry i technologię ich wytwarzania. Ponadto pokazano rezultaty ostrzału małowymiarowych płytek ceramicznych ochraniających RHA przed przebiciem 7,62 mm i 12,7 mm pociskami typu B-32.

Słowa kluczowe

EN

ceramic tile; protection; ballistic test

PL

płytka ceramiczna; ochrona; badanie balistyczne

• Wydawca: Wojskowy Instytut Techniczny Uzbrojenia
• Czasopismo: Problemy Techniki Uzbrojenia
• Rocznik: 2001
• Tom: R. 30, z. 79
• Strony: 45--56
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wykr.

Twórcy

autor

Wiśniewski A.

• Military Institute of Armament Technology, Zielonka, Poland

autor

Dziubak C.

• Institute of Glass and Ceramic, Warsaw, Poland

autor

Rak Z. S.

• Netherlands Energy Research Foundation, Petten, The Netherlands

Bibliografia

• [1] Polesiński Z., Dziubak C., Rećko W.: Alumina ceramics for armour. Problems of Armament Technology and Radiolocation, vol. 64, 1998, pp. 55 (in Polish).
• [2] Concise Encyclopedia of Advanced Ceramics Materials. Edit. By R. J. Brook, Cap. Armors ed. By Pergamon Press, Oxford, 1991, p. 22.
• [3] Polesiński Z., Dziubak C., Rećko W., Wiśniewski A.: Large-sizes special ceramics and technological criteria of applicability. Problems of Armament Technology and Radiolocation, vol. 68, 1999, pp. 137 (in Polish).
• [4] Neshpor V. C., Zaitsev G. P., Dovgal E. J., Maystrenko A. I., Dasevskaya O. B.: Armour ceramics ballistic efficiency evaluation. Proc. 8th CIMTEC, Florence, June 28, 1994, pp. 2395.
• [5] Medvedowski E.: Wear - Resistant Alumina Ceramic, Interceram, vol. 49, 2000, pp. 106.
• [6] Kovatschev I. T.: Moglichkeiten, Zur Erniedrigung der Sintertemperatur von Oxidkeramic. Ber. DKG., vol. 53, 8, 1976, pp. 223 (in German).
• [7] Wiśniewski A.: Podgórzak P., Dziubak C.: Technologial and technikal problems in alumina ceramics application. Technical Textile Products, vol. 1, 1999, pp. 11.
• [8] Haberko K.: Nanoceramika – remarks on processing, Glass and Ceramics, vol. 4, 1992, pp. 27.
• [9] ETEWE GmbH Nowakanlage 13. D-76 137, Karlsruhe. Qualitatssicherung durch Granulatfestigkeits – Profung. Keramische Zeitschrift, vol. 47, 3, 1995, pp. 196.
• [10] Schulle W.: Beurteilung der Festigkeit von Einzelgranelien und Auswirkungen auf das Prebverhalten von granulaten. Keramische Zeitschrift, vol. 47, 7, 1995, pp. 534 (in German).
• [11] Rak Z. S., van Tilborg P. J.: Hot-pressing of alumina, zirconia and ZTA ceramics, ECN unpublished work no 92-KER-009, Petten, 1992.
• [12] Rak Z. S., van Tilborg P. J.: Hot-pressing silicon carbide and boron carbide ceramics, ECN unpublished work no 6053-GR1, Petten, 1992.
• [13] Rak Z. S., van Tilborg P. J.: Microstructure and mechanical properties of hot-pressed Si3N4 ceramics, ECN unpublished work no 6.055.02-GR2, Petten, 1992.
• [14] Rak Z. S., Czechowski J.: Influence to SiC particle shape on the properties of Si3N4 hot-pressed composites, Silicates Industries, Vo. 9-10, 1995, pp. 231-237.
• [15] Rak Z. S.: Development of prototype industrial components from C/Si3N4 composite materia, ECN unpublished work, Petten, 1997.
• [16] Rak Z. S.,Cf/SiC composites by a novel manufacturing method, supplied to Journal of the Am. Ceram. Soc., 2000.
• [17] Rak Z. S.: Cf/SiC/C composites for tribological application, supplied to HT-CMC Conference to be held in Munich, October 1-3, 2001.