PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Annealing Effects on the Interband Transition and Optical Constants of Cobalt Doped Cadmium Oxide Thin Films

Autorzy
Wybrane pełne teksty z tego czasopisma
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The CdO: Co films have been deposited on substrate temperature at 400 °C by spray pyrolysis method using cadmium chloride and cobalt chloride as a precursors for Cd and Co ions, respectively. The effect of annealing temperature on optical constants of Co: CdO thin films are investigated using UV-Visible spectrophotometer in the range of (300-900) nm at room temperature. The absorbance and optical parameters such as α, n, ε1, ε2, and χ are increased when the annealing temperature increases, while the energy gap decreased from 2.5 eV before annealing to 2.48 eV after 500 °C annealing temperature. Urbach energy is increased with the increasing of annealing temperature from 353 meV for sample before annealing to 715 meV for the same samples annealed at 500 °C.
Rocznik
Tom
Strony
81--90
Opis fizyczny
Bibliogr. 24 poz., rys.
Twórcy
autor
  • Al_Mustansiriyah University, College of Education, Physics Department, Baghdad, (IRAQ)
Bibliografia
  • [1] T.K. Lakshmanan, J. Electrochem. Soc. 110 (1963) 548.
  • [2] R. Ferro, J.A. Rodríguez, Thin Solid Films 347 (1999) 295.
  • [3] Zhiyong Zhao, D.L. Morel, C.S. Ferekides, Thin Solid Films 413 (2002)203.
  • [4] K. Gurumurugan, D. Mangalaraj, Sa.K. Narayandass, J. Electron. Mater. 25 (1996) 765.
  • [5] N. Ueda, H. Maeda, H. Ozono, H. Kawazoe, J. Appl. Phys. 84 (1998) 6174.
  • [6] D. Ma, Z. Ye, L. Wang, J. Huang, B. Zhao, Mater. Lett. 58 (2004) 128.
  • [7] H. Kim, J. Horwitz, W. Kim, A. Makinen, Z. Kafafi, D. Chrisey, Thin SolidFilms 420 (2002) 539.
  • [8] Y. Yang, L. Wang, H. Yan, S. Jin, T.J. Marksa, S. Li, Appl. Phys. Lett. 89 (2006) 051116.
  • [9] K.Gurumurugan, D.Mangalaraj, Sa.K.Narayandass, C. Balasubramanian, Phys.Stat.Sol.(a)143 (1994) 85.
  • [10]K.Gurumurugan, D.Mangalaraj, Sa.K.Narayandass, K.Sekar,C.P.G. Vallabhan, Semicond. Sci. Technol. 9 (1994) 1827.
  • [11]T.L.Chu, S.S.Chu, J.Electron.Mater. 19 (1990) 1003.
  • [12]M.Ocampo, P.J.Sebastian, J.Campos, Phys.Stat.Sol.(a)143 (1994) K29.
  • [13]G.Phatak, R.Lal, Thin Solid Films 245 (1994) 17.
  • [14] I.J. Ferrer, Electrochim. Acta 38 (1993) 2199.
  • [15] K.Gurumurugan, D.Mangalaraj, Sa.K.Narayandass, J. Electron. Mater. 25 (1996) 765.
  • [16] T.K. Subramanyam, S. Uthanna, B.S. Naidu, Physica Scripta 57 (1998) 317.
  • [17] D.M. Carballeda-Galicia, R. Castanedo-Perez, O. Jimenez- ´´ Sandoval, S.Jimenez- Sandoval, G.Torres-Delgado, C.I.Zuni-ga-Romero, Thin Solid Films 317 (2000) 105.
  • [18] Xue S. W., Zu X. T., Zhou W. L., Deng H-X., Xiang X., Zhang L., and Deng H., “Effects of PostThermal Annealing on The Optical Constants of ZnO Thin Film”, Journal of Alloys and Compounds, 448 (2008) 21.
  • [19] N. F. Mott, E. A. Davis, Electronic Process in Non-Crystalline Materials, Calendron Press, Oxford (1979).
  • [20]Caglar, Y., Ilican, S., Caglar, M. and Yakuphanoglu, F. , “Effects of In, Al and Sn Dopants on The Structural and Optical Properties of ZnO Thin Films”, SpectrochimicaActa Part A, 67 (2007) 1113.
  • [21] P.K. Ghosh, R. Maity, K.K. Chattopadhyay, Sol. Energy Mater. Sol. Cells 81 (2004) 279.
  • [22] S. K. J. Al-Ani, Y. Al-Ramadin, M. S. Ahmad, A. M. Zihlif, M. Volpe, M. Malineonico, E. Martuscelli, G. Ragosta, Polymer Testing, 18 (1999) 611.
  • [23] E. Abd El-Wahabb, A. E. Bekheet, Applied Surface Science, 173 (2001) 103.
  • [24] Eloy, J. F. Power Lasers, National School of Physics,Grenoble, France, John Wiley and Sons, 59 (1984).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-cb163872-0176-409b-a8fa-26a83a404f05
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.